From mboxrd@z Thu Jan 1 00:00:00 1970 From: Troy Kisky Date: Thu, 20 Sep 2007 17:24:29 -0700 Subject: [U-Boot-Users] PATCH - Fix oob data copied into supplied buffer Message-ID: <46F30F3D.6070801@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This patch correctly sets the oobavail variable and fixes a bug where the oob data was not valid when there where multiple groups in oobfree. It also defines a new variable so that you can tell which parts of a large page have ecc errors. Signed-off-by: Troy Kisky diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index 151f535..45b8fb0 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -931,7 +931,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa for (i = 0; i < eccbytes; i++, eccidx++) oob_buf[oob_config[eccidx]] = ecc_code[i]; /* If the hardware ecc provides syndromes then - * the ecc code must be written immidiately after + * the ecc code must be written immediately after * the data bytes (words) */ if (this->options & NAND_HWECC_SYNDROME) this->write_buf(mtd, ecc_code, eccbytes); @@ -1092,7 +1092,7 @@ static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * re return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL); } - +ulong eccReadMask; /* bitmask off ecc err groups*/ /** * nand_read_ecc - [MTD Interface] Read data with ECC * @mtd: MTD device structure @@ -1267,6 +1267,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ecc_code[j] = oob_data[oob_config[j]]; /* correct data, if neccecary */ + eccReadMask = 0; for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) { ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]); @@ -1283,6 +1284,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, } if (ecc_status == -1) { + eccReadMask |= (1<oobavail; i++) { int from = oobsel->oobfree[i][0]; int num = oobsel->oobfree[i][1]; - memcpy(&oob_buf[oob], &oob_data[from], num); + memcpy(&oob_buf[oob+j], &oob_data[from], num); j+= num; } oob += mtd->oobavail; @@ -1644,8 +1646,10 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, this->select_chip(mtd, chipnr); /* Check, if it is write protected */ - if (nand_check_wp(mtd)) + if (nand_check_wp(mtd)) { + printk (KERN_NOTICE "nand_write_ecc: Device is write protected\n"); goto out; + } /* if oobsel is NULL, use chip defaults */ if (oobsel == NULL) @@ -2486,12 +2490,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips) /* The number of bytes available for the filesystem to place fs dependend * oob data */ - if (this->options & NAND_BUSWIDTH_16) { - mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2); - if (this->autooob->eccbytes & 0x01) - mtd->oobavail--; - } else - mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1); + mtd->oobavail = 0; + for (i=0; this->autooob->oobfree[i][1]; i++) + mtd->oobavail += this->autooob->oobfree[i][1]; /* * check ECC mode, default to software