[U-Boot-Users] Problem with Lite5200 DDR configuration

[Txema Lopez <tlopez@aotek.es>]

Prakash Palanisamy, TLS-Chennai wrote:

> Hi,
>
> We are using u-Boot in Lite5200B with DDR. We compiled the u-Boot with 
> ? icecube_5200_DDR_LOWBOOT_config? option and flashed the image in to 
> flash at * 0xFF800000 * .
>
> The problem we are facing is,
>
> The image is *booting* only if we flash the image in *both (0xFF800000 
> and 0xFF000000) places*. The reset vector for the two configurations 
> (icecube_5200_LOWBOOT & icecube_5200_DDR_LOWBOOT) are same.
>
> We have tried by writing different images in these locations and found 
> that the booted image is the one which is flashed in 0xFF800000. But 
> if erase the image at 0xFF000000, it is not booting.
>
The Lite5200B has two banks of 16Mbtes flash, so if you flashed U-Boot 
in the 0xFF800000 you are putting it in the meddle of the flash, nor in 
theLOWBOOT location, nor in the HIGH boot location. When you flash a new 
U-Boot in the 0xFF000000 the system starts from this location but I 
think there is a jump to the U-Boot flashed in the 0xFF800000 because 
your TEXT_BASE ( the address reference for the linker) in U-Boot is 
0xFF800000.
The correct address for the LOWBOOT in the Lite5200B is 0xFF000000.

Best Regards,
Txema.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: tlopez.vcf
Type: text/x-vcard
Size: 324 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070927/e753f4bd/attachment.vcf