* [U-Boot-Users] [PATCH 3/4] PPC4xx: Add 440EPx DDR2 SPD DIMM support
@ 2007-10-25 19:33 Larry Johnson
0 siblings, 0 replies; only message in thread
From: Larry Johnson @ 2007-10-25 19:33 UTC (permalink / raw)
To: u-boot
This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
controller. It should also work on the 440GRx. It is based on the DDR2
SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
This code has been tested on prototype Korat boards with three Kingston
DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
(two ranks). The Korat board has a single DIMM socket, but support has
been provided (though not tested) for boards with two DIMM sockets.
Signed-off-by: Larry Johnson <lrj@acm.org>
---
[This patch creates a single file, but slightly exceeds the 40 KiB limit
for the mailing list. It is available at
"http://k1lj.home.att.net/u-boot/2007102400-patch3.txt".]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-10-25 19:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-25 19:33 [U-Boot-Users] [PATCH 3/4] PPC4xx: Add 440EPx DDR2 SPD DIMM support Larry Johnson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox