From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jerry Van Baren Date: Fri, 02 Nov 2007 08:35:30 -0400 Subject: [U-Boot-Users] neo1973 uboot details In-Reply-To: <874265.75613.qm@web94210.mail.in2.yahoo.com> References: <874265.75613.qm@web94210.mail.in2.yahoo.com> Message-ID: <472B1992.1010901@ge.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Tiju wrote: > Hi all > > I am new to u-boot and I am trying to build an image > for the neo1973. But the board type is not present in > the source file that I downloaded > (u-boot-1.3.0-rc3.tar.gz). > > I have gone through the help files in > http://www.denx.de/wiki/DULG/Manual. But they discuss > how to configure uboot for predefined boards. > > 1. Where would I get the board specific files for > neo1973? > 2. If I get the files, how would I integrate it with > the u-boot source code? > > I have got the patches from the openmoko project > (http://patches.openmoko.org/openmoko-uboot/) but from > where will I get the source files.. or is it possible > patch the uboot without them. If possible please > suggest me how I could do that. > > Actually, my requirement is to build u-boot for the > S3C2440A processor and boot the kernel from a nand > flash. > > Any help would be appreciated. > > Thanks in advance! > > Tiju Jacob Hi Tiju, I don't believe the neo1973 project has been accepted into the mainline u-boot repository. You need to use the openmoku sources. That page is pretty shy on details on how do do what you asked (starting with what version of u-boot to apply the special patches to). I would suggest your best approach is to ask questions on an openmoko-devel list and enhance the wiki page. Best regards, gvb