[U-Boot-Users] [PATCH] TB5200: configuration updates

[U-Boot-Users] [PATCH] TB5200: configuration updates

[Martin Krause]

Some configuration updates for the TQM5200 based TB5200 board:

- enable command line history
- increase malloc space (because of bigger flash sectors)

Signed-off-by: Martin Krause <martin.krause@tqs.de>
---
If I receive no negative feedback, I'm going to pick this patch into
the u-boot-tq-group.git custodian tree and do a pull-request, once the
merge window has opened again.

Best Regards,
Martin Krause

 include/configs/TB5200.h |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 1c6a9ae..ae8d9ab 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -335,7 +335,7 @@
 #else
 #define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
 #endif /* CONFIG_TQM5200_B */
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
@@ -392,6 +392,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else

[U-Boot-Users] [PATCH] TB5200: configuration updates

[Bartlomiej Sieka]

Martin Krause wrote:
> Some configuration updates for the TQM5200 based TB5200 board:
> 
> - enable command line history
> - increase malloc space (because of bigger flash sectors)

Hi Martin,

I don't know what is the total amount of SDRAM on the TB5200 board, but
you might want to check if CFG_MEMTEST_END needs to be decreased to
accommodate bigger malloc space.

Regards,
Bartlomiej

[U-Boot-Users] [PATCH] TB5200: configuration updates

[Martin Krause]

Hi Bartlomiej

u-boot-users-bounces at lists.sourceforge.net wrote on :
> Martin Krause wrote:
> > Some configuration updates for the TQM5200 based TB5200 board:
> > 
> > - enable command line history
> > - increase malloc space (because of bigger flash sectors)
> 
> Hi Martin,
> 
> I don't know what is the total amount of SDRAM on the TB5200 board,
> but you might want to check if CFG_MEMTEST_END needs to be decreased
> to accommodate bigger malloc space.

Thanks for pointing out! I must admit, that I haven't thought about 
that point. But fortunately all TB5200 boards have 32 MiB SDRAM and 
above, so the current setting of CFG_MEMTEST_END = 0x00f00000 
(= 15 MiB) should work with the increased malloc space.

Best Regards,
Martin Krause