From mboxrd@z Thu Jan 1 00:00:00 1970 From: Clemens Koller Date: Wed, 07 Nov 2007 23:27:02 +0100 Subject: [U-Boot-Users] Debugging 85xx eTSEC's In-Reply-To: References: <000a01c8186e$78b92d50$0201a8c0@Bala> <4728A639.9030608@anagramm.de> <472F762C.1060902@anagramm.de> Message-ID: <47323BB6.5060608@anagramm.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de robert lazarski schrieb: > Thanks Clemens for the kind review you gave us off list. In the case > its might help someone else someday, we found the problem as our > pinouts were wrong to the NET's > > -PIN of the PHY- -NAME we gave to the NET- > LED_LINK_10 LED_LINK_100 > LED_LINK_100 LED_LINK_1000 > LED_LINK_1000 LED_DUPLEX > LED_LINK_DUPLEX LED_LINK_10 > > We can now ping, use tftp etc. > Robert Fine to hear it is working now! And thanks for the flowers. ;-) I also had to check the PHY configuration on my board many times to make sure everything is right. It's easy to make mistakes here. @:-] There is propably a way to show and re-configure this at run-time with u-boot via the mdio interface, isn't it? Regards, -- Clemens Koller _______________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Str. 45/1 81379 Muenchen Germany http://www.anagramm-technology.com Phone: +49-89-741518-50 Fax: +49-89-741518-19