public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: William Juul <william@juul.no>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users]  [PATCH 0/9] NAND update
Date: Mon, 12 Nov 2007 14:01:33 +0100	[thread overview]
Message-ID: <47384EAD.5010706@juul.no> (raw)

Update NAND to use MTD from Linux 2.6.22.1

A lot changed in the Linux MTD code, since it was last ported from
Linux to U-Boot. This patch takes U-Boot NAND support to the level
of Linux 2.6.22.1 and will enable support for very large NAND devices
(4KB pages) and ease the compatibility between U-Boot and Linux
filesystems and drivers.

This patch is tested on two custom boards with PPC and ARM
processors running YAFFS in U-Boot and Linux using gcc-4.1.2
cross compilers. We intend to submitt a YAFFS patch after this 
patch has been submitted/accepted.

MAKEALL ppc/arm has some issues:
 * DOC/OneNand/nand_spl is not building (I have not tried porting
  these parts, and since I do not have any HW and I am not familiar
  with this code/HW I think its best left to someone else.)

Except for the issues mentioned above, I have ported all drivers
necessary to run MAKEALL ppc/arm without errors and warnings. Many
drivers were trivial to port, but some were not so trivial. The
following drivers must be examined carefully and maybe rewritten to
some degree:
 cpu/ppc4xx/ndfc.c
 cpu/arm926ejs/davinci/nand.c
 board/delta/nand.c
 board/zylonite/nand.c

Signed-off-by: William Juul <william.juul@datarespons.no>
Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
----

We have set up a git repository were you can pull the patch:
http://git.tandberg.com/tandberg/u-boot.git
Since my last email to the list I have cleaned up some coding style issues
as requested by Stefan Roese.

The master branch is tracking the official u-boot.git master branch.
The branch mtd-update-1.3.0-rc3 is based on tag v1.3.0-rc3
The branch mtd-update will (to some degree) continue to track u-boot updates.

The file drivers/nand/nand_base.c contains the struct nand_oob_128 which
is not (yet) part of Linux mtd. I will try to figure out if this implementation
is valid by asking on the linux-mtd mailing list.

Note that the following patch-series is broken unless it is seen as one single
patch. It is broken up to multiple emails to fit the size limit. This patch
series is based on a diff against v1.3.0-rc3.

Best regards
William Juul

-------------------------------------------------
William Juul, Senior Development Engineer
Data Respons Norge AS
Sandviksveien 26
P.O. Box 489
NO-1323 H?vik, Norway

www.datarespons.no
-------------------------------------------------


 board/bf537-stamp/nand.c         |   43 +-
 board/dave/PPChameleonEVB/nand.c |   49 +-
 board/delta/nand.c               |   41 +-
 board/esd/common/esd405ep_nand.c |   42 +-
 board/freescale/m5329evb/nand.c  |   42 +-
 board/nc650/nand.c               |   78 +-
 board/netstar/nand.c             |   20 +-
 board/prodrive/alpr/nand.c       |   57 +-
 board/prodrive/pdnb3/nand.c      |   53 +-
 board/sc3/sc3nand.c              |   44 +-
 board/tqm8272/tqm8272.c          |   34 +-
 board/zylonite/nand.c            |   39 +-
 common/cmd_doc.c                 |    5 +-
 common/cmd_nand.c                |  230 ++--
 cpu/arm926ejs/davinci/nand.c     |   41 +-
 cpu/ppc4xx/ndfc.c                |   57 +-
 drivers/nand/diskonchip.c        |  559 ++++---
 drivers/nand/nand_base.c         | 3445 ++++++++++++++++++++------------------
 drivers/nand/nand_bbt.c          |  552 ++++--
 drivers/nand/nand_ecc.c          |   21 +-
 drivers/nand/nand_ids.c          |  169 ++-
 drivers/nand/nand_util.c         |  357 +++--
 include/common.h                 |    2 +
 include/linux/err.h              |   45 +
 include/linux/mtd/blktrans.h     |   81 +
 include/linux/mtd/compat.h       |    7 +-
 include/linux/mtd/doc2000.h      |  217 ++--
 include/linux/mtd/inftl-user.h   |   91 +
 include/linux/mtd/jffs2-user.h   |   35 +
 include/linux/mtd/mtd-abi.h      |  137 ++-
 include/linux/mtd/mtd.h          |  154 ++-
 include/linux/mtd/nand.h         |  447 ++++--
 include/linux/mtd/nftl-user.h    |   76 +
 include/linux/mtd/nftl.h         |   93 +-
 include/linux/mtd/ubi-header.h   |  360 ++++
 include/linux/mtd/ubi-user.h     |  161 ++
 include/nand.h                   |    3 +-
 37 files changed, 4665 insertions(+), 3222 deletions(-)

                 reply	other threads:[~2007-11-12 13:01 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47384EAD.5010706@juul.no \
    --to=william@juul.no \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox