From mboxrd@z Thu Jan  1 00:00:00 1970
From: Larry Johnson <lrj@arlinx.com>
Date: Wed, 14 Nov 2007 16:37:46 -0500
Subject: [U-Boot-Users] [PATCH 2/2 (resubmit)] NET: Add Ethernet
 1000BASE-X support for PPC4xx
In-Reply-To: <200711142104.51228.sr@denx.de>
References: <4728ABA6.3090101@arlinx.com> <4729E1A0.3010200@qstreams.com>
	<473B2956.6050607@arlinx.com> <200711142104.51228.sr@denx.de>
Message-ID: <473B6AAA.1090901@arlinx.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Stefan Roese wrote:
> On Wednesday 14 November 2007, Larry Johnson wrote:
>> Thank you for incorporating my patch, Ben.
>>
>> I have merged my changes into the PPC4xx "for-1.3.1" branch.  When I do
>> the MAKEALL there, the build for Ocotea board fails because the binary
>> is now 0xAC byte too large.  What are your opinions on the best way to
>> handle this?
> 
> Which gcc version did you use?
> 
> Best regards,
> Stefan
> 
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================

ppc_4xxFP-gcc (GCC) 4.0.0 (DENX ELDK 4.1 4.0.0)

Best regards,
Larry