From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de
Subject: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
Date: Thu, 30 Apr 2020 13:03:58 +0200 [thread overview]
Message-ID: <47699640-e89a-585a-59b0-1d4f1d00ae8d@xilinx.com> (raw)
In-Reply-To: <8a62851c-3323-2a73-6d90-d8fa7c8e4e6f@gmail.com>
hi,
that's quite weird. Did you try any petalinux bsp and boot petalinux
boot.bin on that board to make sure that board is fine?
M
On 30. 04. 20 13:01, Major A wrote:
> Hi Michal,
>
> Sorry I misunderstood your message, and I didn't spot the attached
> files.? Now I booted with those two files, there's no output on the
> UARTs whatsoever.? Is there anything else I can try?
>
> Cheers,
>
> ? Andr?s
>
>
> On 30/04/2020 12:33, Michal Simek wrote:
>> Hi,
>>
>> On 30. 04. 20 12:19, Major A wrote:
>>> Hi Michal,
>>>
>>>> can you please try these files in SD boot mode?
>>>
>>> Done, here are two logs, both in SD boot mode.
>>>
>>> First, log.sd is with SD card inserted (with the image files that
>>> apparently refuse to work other than the early UART message).
>>>
>>> The other file, log.no-sd, is with no card inserted.
>>
>> we don't understand each other. I sent you boot.bin and image.itb. Just
>> copy them to SD card, switch board to sd boot mode and power it up.
>>
>> Thanks,
>> Michal
>>
next prev parent reply other threads:[~2020-04-30 11:03 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 11:28 ZynqMP boot: no messages from SPL other than "Debug uart enabled" Major A
2020-03-12 8:15 ` Michal Simek
2020-03-12 9:12 ` Major A
2020-03-12 10:32 ` Michal Simek
2020-03-12 11:38 ` Major A
2020-03-12 11:44 ` Michal Simek
2020-03-12 12:01 ` Major A
2020-03-12 12:06 ` Michal Simek
2020-03-12 13:24 ` Major A
2020-03-12 13:31 ` Michal Simek
2020-03-12 14:19 ` Major A
2020-03-12 15:22 ` Michal Simek
2020-04-23 9:02 ` Major A
2020-04-24 12:14 ` Michal Simek
2020-04-27 22:00 ` Major A
2020-04-28 6:42 ` Michal Simek
2020-04-28 9:29 ` Major A
2020-04-28 9:33 ` Michal Simek
2020-04-28 10:53 ` Major A
2020-04-28 11:16 ` Michal Simek
2020-04-28 11:25 ` Major A
2020-04-28 11:29 ` Michal Simek
2020-04-28 13:34 ` Major A
2020-04-28 13:55 ` Michal Simek
2020-04-28 14:21 ` Major A
[not found] ` <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
[not found] ` <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
2020-04-30 10:20 ` Fwd: " Major A
[not found] ` <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
2020-04-30 11:01 ` Major A
2020-04-30 11:03 ` Michal Simek [this message]
2020-04-30 11:10 ` Major A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47699640-e89a-585a-59b0-1d4f1d00ae8d@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox