From mboxrd@z Thu Jan 1 00:00:00 1970 From: Larry Johnson Date: Thu, 27 Dec 2007 11:36:14 -0500 Subject: [U-Boot-Users] [PATCH 9/9] Add support for Korat PPC440EPx board In-Reply-To: <200712271621.58805.sr@denx.de> References: <476D70BA.3060807@arlinx.com> <200712271621.58805.sr@denx.de> Message-ID: <4773D47E.6030305@arlinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Stefan Roese wrote: [snip] > Just for your information: The LWMON5 has a complete GPIO setup via the > CFG_4xx_GPIO_TABLE define in the board config file. This is much easier to > maintain. I suggest you change this GPIO configuration at some time to use > this method. For now I will accept this version since it is tested. > > And yes, this should be done for Sequoia too at some time. Patches as always > welcome. ;) > > Best regards, > Stefan > > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de > ===================================================================== Thanks for the hint; I'll take a look at this. Are you also interested in Sequoia patches, for example, to use the new common Denali data-eye search code? Best regards, Larry