[U-Boot-Users] Possible TSEC Ethernet driver patch

[Ben Warren <biggerbadderben@gmail.com>]

michael.firth at bt.com wrote:
> While debugging a board recently I found that the MDIO (mii) command
> support in the TSEC Ethernet driver is somewhat unhelpful.
>
> Currently, even though there is a comment in the code that "For now,
> only TSEC1 (index 0) has access to the PHYs, so all of the entries have
> '0'", all MDIO commands are processed by searching for a TSEC instance
> that has the requested MDIO address associated with it, and then using
> that instance to run the command, even though, because of the
> aforementioned comment, all instances process MDIO commands through the
> same port.
>
> This means that it is only possible to communicate with MDIO addresses
> that have a TSEC instance associated with them, even though the hardware
> is capable of accessing any address. It also means that there is a list
> search that isn't needed.
>
> I have patched the 1.3.1 U-Boot code to remove this search, and to
> interrogate the requested PHY directly. This means that it is possible
> to directly access all 32 PHY addresses.
>
> Is this a change that would be more generally useful to the U-Boot
> community, and, if so, how should I submit a more general patch for
> this?
>
>   
Why don't you post what you have, clearly label it as 'RFC' and we'll 
have a look. In my spare time (very spare indeed) I'm trying to decouple 
PHYs from MACs, but time is hard to find and meanwhile things need to work.

regards,
Ben