[U-Boot-Users] Latest U-Boot breaks 83xx ethernet

[U-Boot-Users] Latest U-Boot breaks 83xx ethernet

[Timur Tabi]

I've tried this on 8323E-MDS and an 8360E-MDS, so maybe it's only a QE thing, 
but the latest U-Boot from denx.de breaks Ethernet.  Anyone else see this?

U-Boot 1.3.1-281-g74ac5fac-dirty (Jan  8 2008 - 15:29:39) MPC83XX

Reset Status: Software Hard, External/Internal Soft, External/Internal Hard

CPU:   e300c2, MPC8323E, Rev: 11 at 264 MHz, CSB:  132 MHz
Board: Freescale MPC832XEMDS
I2C:   ready
DRAM:  128 MB
FLASH: 16 MB
In:    serial
Out:   serial
Err:   serial
Net:   UEC: PHY is Davicom DM9161A (181b8a0)
FSL UEC0: Full Duplex
FSL UEC0: Speed 100BT
FSL UEC0: Link is up
UEC: PHY is Davicom DM9161A (181b8a0)
FSL UEC0, FSL UEC1
=> ping $serverip
Using FSL UEC1 device
ping failed; host 192.168.1.1 is not alive


-- 
Timur Tabi
Linux kernel developer at Freescale

[U-Boot-Users] Latest U-Boot breaks 83xx ethernet

[Timur Tabi]

Timur Tabi wrote:
> I've tried this on 8323E-MDS and an 8360E-MDS, so maybe it's only a QE thing, 
> but the latest U-Boot from denx.de breaks Ethernet.  Anyone else see this?

Never mind, I just noticed all the other threads on it.

I also distinctly remember warning everyone back on Nov 14 that this mess would 
happen if the eth_init() return-code patch were applied without testing client 
drivers.

-- 
Timur Tabi
Linux kernel developer at Freescale