From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ben Warren <biggerbadderben@gmail.com>
Date: Thu, 10 Jan 2008 15:41:35 -0500
Subject: [U-Boot-Users] [PATCH 5/5] mpc83xx: UEC: add support for
 Broadcom BCM5481 Gigabit PHY
In-Reply-To: <20080109175815.GE25068@localhost.localdomain>
References: <20080109175051.GA18582@localhost.localdomain>
	<20080109175815.GE25068@localhost.localdomain>
Message-ID: <478682FF.1000607@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Anton Vorontsov wrote:
> This patch adds basic support for Broadcom BCM5481 PHY,
> with the quirk needed for at least MPC8360E-RDK.
>
> Quirk comes from MPC8360E-RDK BSP source, I think author is
> Peter Barada <peterb@logicpd.com>, but I'm not sure.
>
> There are no openly available specifications for that PHY.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
>  drivers/qe/uec_phy.c |   77 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/qe/uec_phy.h |    5 +++
>  2 files changed, 82 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
> index ca6faa6..6882d03 100644
> --- a/drivers/qe/uec_phy.c
> +++ b/drivers/qe/uec_phy.c
> @@ -237,6 +237,44 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info)
>  	return 0;
>  }
>  
> +static int gbit_read_status(struct uec_mii_info *mii_info)
> +{
> +	u16 status;
> +	int err;
> +
> +	err = genmii_update_link(mii_info);
> +	if (err)
> +		return err;
> +
> +	if (mii_info->autoneg) {
> +		mii_info->pause = 0;
> +		status = phy_read(mii_info, MII_1000BASETSTATUS);
> +		if (status & (LPA_1000FULL | LPA_1000HALF)) {
> +			mii_info->speed = SPEED_1000;
> +			if (status & LPA_1000FULL)
> +				mii_info->duplex = DUPLEX_FULL;
> +			else
> +				mii_info->duplex = DUPLEX_HALF;
> +		} else {
> +			status = phy_read(mii_info, PHY_ANLPAR);
> +
> +			if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
> +				mii_info->duplex = DUPLEX_FULL;
> +			else
> +				mii_info->duplex = DUPLEX_HALF;
> +			if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
> +				mii_info->speed = SPEED_100;
> +			else
> +				mii_info->speed = SPEED_10;
> +		}
> +	}
> +	/*
> +	 * On non-aneg, we assume what we put in BMCR is the speed,
> +	 * though magic-aneg shouldn't prevent this case from occurring.
> +	 */
> +	 return 0;
> +}
> +
>   
Please roll the 1Gb code into genmii_read_status.  10/100 PHYs should 
report 0 in the
MII_1000BASETSTATUS register so it should work.
>  static int marvell_config_aneg (struct uec_mii_info *mii_info)
>  {
>  	/* The Marvell PHY has an errata which requires
> @@ -319,6 +357,35 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
>  	return 0;
>  }
>  
> +static int bcm_init(struct uec_mii_info *mii_info)
> +{
> +	gbit_config_aneg(mii_info);
> +
> +#ifdef CONFIG_MPC8360ERDK
> +	{
> +		u16 val;
> +		int cnt = 50;
> +
> +		/* Wait for aneg to complete. */
> +		do
> +			val = phy_read(mii_info, PHY_BMSR);
> +		while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
> +
> +		/* Set RDX clk delay. */
> +		phy_write(mii_info, 0x18, 0x7 | (7 << 12));
> +
> +		val = phy_read(mii_info, 0x18);
> +		/* Set RDX-RXC skew. */
> +		val |= (1<<8);
> +		val |= (7 | (7 << 12));
> +		/* Write bits 14:0. */
> +		val |= (1<<15);
> +		phy_write(mii_info, 0x18, val);
> +	}
> +#endif
>   
What is it that makes this specific to one board?  Magic numbers are 
baaaad, especially for industry-standard memory maps (I'm thinking of 
offset 0x18 in case it's not obvious)
> +	 return 0;
> +}
> +
>  static int marvell_read_status (struct uec_mii_info *mii_info)
>  {
>  	u16 status;
> @@ -491,6 +558,15 @@ static struct phy_info phy_info_marvell = {
>  	.config_intr = &marvell_config_intr,
>  };
>  
> +static struct phy_info phy_info_bcm5481 = {
> +	.phy_id = 0x0143bca0,
> +	.phy_id_mask = 0xffffff0,
> +	.name = "Broadcom 5481",
> +	.features = MII_GBIT_FEATURES,
> +	.read_status = gbit_read_status,
> +	.init = bcm_init,
> +};
> +
>  static struct phy_info phy_info_genmii = {
>  	.phy_id = 0x00000000,
>  	.phy_id_mask = 0x00000000,
> @@ -504,6 +580,7 @@ static struct phy_info *phy_info[] = {
>  	&phy_info_dm9161,
>  	&phy_info_dm9161a,
>  	&phy_info_marvell,
> +	&phy_info_bcm5481,
>  	&phy_info_genmii,
>  	NULL
>  };
> diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
> index e59a940..6f769fb 100644
> --- a/drivers/qe/uec_phy.h
> +++ b/drivers/qe/uec_phy.h
> @@ -29,6 +29,11 @@
>  #define MII_1000BASETCONTROL_FULLDUPLEXCAP    0x0200
>  #define MII_1000BASETCONTROL_HALFDUPLEXCAP    0x0100
>  
> +/* 1000BT status */
> +#define MII_1000BASETSTATUS	0x0a
> +#define LPA_1000FULL		0x0400
> +#define LPA_1000HALF		0x0200
> +
>  /* Cicada Extended Control Register 1 */
>  #define MII_CIS8201_EXT_CON1	    0x17
>  #define MII_CIS8201_EXTCON1_INIT    0x0000
>