From: Larry Johnson <lrj@acm.org>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Temperature sensor on Sequoia board
Date: Thu, 21 Feb 2008 17:11:29 -0500 [thread overview]
Message-ID: <47BDF711.6030305@acm.org> (raw)
Hi Stefan and group,
When I was checking the LM75/AD7414 driver using my Sequoia board, I
found that the AD7414 on the Sequoia does not appear to update its
temperature as its documentation describes. I had to reset U-Boot to
get the temperature reading to change. Also, every since I have had
that board, the first temperature reading reported by U-Boot after
applying power has always been incorrect. I didn't find anything in
the AD7414 documentation that would explain this.
Has anyone seen this behavior on other Sequoia boards?
Best regards,
Larry
next reply other threads:[~2008-02-21 22:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-21 22:11 Larry Johnson [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-02-21 22:17 [U-Boot-Users] Temperature sensor on Sequoia board Mike Nuss
2008-02-23 7:16 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BDF711.6030305@acm.org \
--to=lrj@acm.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox