From mboxrd@z Thu Jan  1 00:00:00 1970
From: Larry Johnson <lrj@acm.org>
Date: Thu, 21 Feb 2008 17:11:29 -0500
Subject: [U-Boot-Users] Temperature sensor on Sequoia board
Message-ID: <47BDF711.6030305@acm.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Stefan and group,

When I was checking the LM75/AD7414 driver using my Sequoia board, I
found that the AD7414 on the Sequoia does not appear to update its
temperature as its documentation describes.  I had to reset U-Boot to
get the temperature reading to change.  Also, every since I have had
that board, the first temperature reading reported by U-Boot after
applying power has always been incorrect.  I didn't find anything in
the AD7414 documentation that would explain this.

Has anyone seen this behavior on other Sequoia boards?

Best regards,
Larry