[U-Boot-Users] Problems with new ethernet init on mpc8360

[Jerry Van Baren <gerald.vanbaren@ge.com>]

Kim Phillips wrote:
> On Mon, 25 Feb 2008 22:55:37 -0500
> Jerry Van Baren <gvb.uboot@gmail.com> wrote:
> 
>> Hi Kim,
>>
>> I have a mpc8360emds eval board.  The ee62ed patch (below) speeds up the 
>> start up (good), but seems to cause the board to hang on the *second* 
>> ethernet operation.
>>
>> I can cause this by doing two pings in a row: the first ping initializes 
>> the network and completes successfully.  The second ping hangs the 
>> board: it never completes.  I cannot abort it with ^C.  The only way out 
>> is to reset the board.
>>
>> The same thing happens with two back-to-back tftp operations or a ping 
>> followed by a tftp operation.
>>
>> If I back out the ee62ed patch (below), it "fixes" the problem.
>>
>> I tried backing out some simple portions of the patch (added delays back 
>> in) with no success.  I've given up chasing this for tonight.  Any 
>> inspiration you can generate would be appreciated, I'll chase it some 
>> more tomorrow.
> 
> I verified rc2 on rev. 1.1 and 2.1 boards pings more than once.
> 
> can you provide more details about which u-boot version, what board rev
> you're on, what kind of connection you're using, speed, etc.?
> 
> Kim

Hi Kim,

OK, probably operator error.  I claim to be using 1.3.2-rc2 but my 
repository clone could be introducing problems.  I'll do a clean clone 
and rebuild of u-boot, hopefully that is all it is.

It is connection is through a commercial switch, should be 100bT full 
duplex (not verified, cannot see the blinky lights from here).  I don't 
know the board rev off-hand (I'm not on-site at the moment).

=> version
U-Boot 1.3.2-rc2-g330a77f6-dirty (Feb 25 2008 - 22:21:12) MPC83XX

root:~> cat /proc/cpuinfo
processor : 0
cpu : e300c1
clock : 528.000000MHz
revision : 2.0 (pvr 8083 0020)
bogomips : 131.58
timebase : 66000000
platform : MPC836x MDS

Thanks,
gvb