From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timur Tabi Date: Fri, 29 Feb 2008 10:48:40 -0600 Subject: [U-Boot-Users] [PATCH v5] QE IO: Add initial data to pin configuration + read/write functions In-Reply-To: <15337956.post@talk.nabble.com> References: <15337956.post@talk.nabble.com> Message-ID: <47C83768.9010200@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de David Saada wrote: > On the MPC83xx & MPC85xx architectures that have QE, add initial data to the > pin configuration table (qe_iop_conf_tab). This is relevant for GPIO pins > defined as output. One can setup a value of -1 to leave the value unchanged. > QE initialization tables in all relevant boards were also replaced. > In addition, add IO pin read & write functions. > This patch also includes commands for reading and writing parallel I/O ports > (pario command). > > Signed-off-by: David Saada Acked-by: Timur Tabi FYI David, I just noticed this patch yesterday. I would have noticed it and ack'd it back on the 7th if you had included my email address on the "To:" line. -- Timur Tabi Linux kernel developer at Freescale