[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[Mark Jonas]

Hello,

the attached patch replaces the patch I sent before. I came to the the
conclusion that making SMSC's driver comply to the U-Boot coding style
would be the right thing because SMSC will most likely not update
their driver very often. I hope the driver is now compliant enough. It
was really a lot of work.

The patch adds a driver for the SMSC LAN911x and LAN921x family of
Ethernet controllers. The patch also enables the use of this driver on
the SH7720 based MPR2 board.

The patch is against U-Boot git from this morning, i.e. v1.3.2.

Regards,
Mark Jonas

CHANGELOG:
----------
sh: Added support for SMSC LAN9115 networking on MPR2 board.

Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_mpr2_smsc9118_20080310.patch
Type: application/octet-stream
Size: 40913 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080310/c7934deb/attachment.obj 

[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[Ben Warren]

Hi Mark,

Mark Jonas wrote:
> Hello,
>
> the attached patch replaces the patch I sent before. I came to the the
> conclusion that making SMSC's driver comply to the U-Boot coding style
> would be the right thing because SMSC will most likely not update
> their driver very often. I hope the driver is now compliant enough. It
> was really a lot of work.
>
>   
I'll have a look at it tonight.  Your hard work is appreciated and is 
worth it.  In the case of these chips, there's no reason for using 
SMSC's drivers verbatim because the chips are well documented and 
commonly used.  Thanks for doing this!
> The patch adds a driver for the SMSC LAN911x and LAN921x family of
> Ethernet controllers. The patch also enables the use of this driver on
> the SH7720 based MPR2 board.
>
> The patch is against U-Boot git from this morning, i.e. v1.3.2.
>
> Regards,
> Mark Jonas
>
> CHANGELOG:
> ----------
> sh: Added support for SMSC LAN9115 networking on MPR2 board.
>
> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>   
regards,
Ben

[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[Mark Jonas]

Hi Ben,

>  I'll have a look at it tonight.  Your hard work is appreciated and is
>  worth it.  In the case of these chips, there's no reason for using
>  SMSC's drivers verbatim because the chips are well documented and
>  commonly used.  Thanks for doing this!

Did the driver find your appreciation? At least it did not make its
way into your custodian tree yet.

TIA,
Mark

[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[Ben Warren]

Mark Jonas wrote:
> Hi Ben,
>
>   
>>  I'll have a look at it tonight.  Your hard work is appreciated and is
>>  worth it.  In the case of these chips, there's no reason for using
>>  SMSC's drivers verbatim because the chips are well documented and
>>  commonly used.  Thanks for doing this!
>>     
>
> Did the driver find your appreciation? At least it did not make its
> way into your custodian tree yet.
>
> TIA,
> Mark
>
>   
Sorry, tonight has been time-shifted.  I'll have a look today.

regards,
Ben

[U-Boot-Users] [PATCH] sh, net: Updated SMSC LAN911x driver and support for MPR2 board

[Mark Jonas]

Hi Ben,

>  Sorry, tonight has been time-shifted.  I'll have a look today.

Any news?

Regards,
Mark