[U-Boot-Users] [PATCH 2/2 resend] Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

[U-Boot-Users] [PATCH 2/2 resend] Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

[Jerry Van Baren]

Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
---

Hi Kim,

This is useful if/when Stefan Roese applies the previous patch "Flash 
programming progress countdown."

Best regards,
gvb

  include/configs/MPC8360EMDS.h |    1 +
  1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index eff9fba..82860ba 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -194,6 +194,7 @@
  #define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
  #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
  #define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */

  #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash 
base */
  #define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
-- 
1.5.4.1


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

[U-Boot-Users] [PATCH 2/2 resend] Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.

[Kim Phillips]

On Tue, 18 Mar 2008 21:44:41 -0400
Jerry Van Baren <gvb.uboot@gmail.com> wrote:

> Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
> ---
> 
> Hi Kim,
> 
> This is useful if/when Stefan Roese applies the previous patch "Flash 
> programming progress countdown."
> 
> Best regards,
> gvb
> 
>   include/configs/MPC8360EMDS.h |    1 +
>   1 files changed, 1 insertions(+), 0 deletions(-)

applied.

Kim