[U-Boot-Users] [PATCH v2] mpc8323erdb: fix EEPROM page size and get MAC from EEPROM

[U-Boot-Users] [PATCH v2] mpc8323erdb: fix EEPROM page size and get MAC from EEPROM

[Michael Barkowski]

This patch fixes eeprom page size so that you can now write more than
64 bytes at a time.

It also makes the board take MAC addresses, if found, from EEPROM.

User should place up to 4 addresses at offset 0x7f00, for
eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
four six-byte values should have it's CRC at the end.  crc32 and
eeprom commands can be used to accomplish this.

If CRC fails, MAC addresses come from the environment.  If CRC
succeeds, the environment is overwritten at startup.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
---
Kim,
Please accept this as a follow-on to:
 0fa7a1b4719e325fce332689fb8754ec166191ff mpc8323erdb: remove RTC and add EEPROM

 board/freescale/mpc8323erdb/mpc8323erdb.c |   34 +++++++++++++++++++++++++++++
 include/configs/MPC8323ERDB.h             |   10 ++++++-
 lib_ppc/board.c                           |    2 +-
 3 files changed, 43 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
index 88d5e8f..afc0eee 100644
--- a/board/freescale/mpc8323erdb/mpc8323erdb.c
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#if defined(CFG_I2C_MAC_OFFSET)
+int mac_read_from_eeprom(void)
+{
+	uchar buf[28];
+	char str[18];
+	int i = 0;
+	unsigned int crc = 0;
+	unsigned char enetvar[32];
+
+	/* Read MAC addresses from EEPROM */
+	if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) {
+		printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
+		       CFG_I2C_EEPROM_ADDR);
+	} else {
+		if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
+			printf("Reading MAC from EEPROM\n");
+			for (i = 0; i < 4; i++) {
+				if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
+					sprintf(str,
+						"%02X:%02X:%02X:%02X:%02X:%02X",
+						buf[i * 6], buf[i * 6 + 1],
+						buf[i * 6 + 2], buf[i * 6 + 3],
+						buf[i * 6 + 4], buf[i * 6 + 5]);
+					sprintf((char *)enetvar,
+						i ? "eth%daddr" : "ethaddr", i);
+					setenv((char *)enetvar, str);
+				}
+			}
+		}
+	}
+	return 0;
+}
+#endif				/* CONFIG_I2C_MAC_OFFSET */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 94c4c6b..3775465 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -323,8 +323,11 @@
 /*
  * Config on-board EEPROM
  */
-#define CFG_I2C_EEPROM_ADDR     0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR		0x50
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*
  * General PCI
@@ -549,6 +552,9 @@
 #define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
 #define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
 
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CFG_I2C_MAC_OFFSET	0x7f00	/* MAC address offset in I2C EEPROM */
+
 #define CONFIG_IPADDR		10.0.0.2
 #define CONFIG_SERVERIP		10.0.0.1
 #define CONFIG_GATEWAYIP	10.0.0.1
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index ee0213e..85a0733 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -862,7 +862,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	sc3_read_eeprom();
 #endif
 
-#ifdef CFG_ID_EEPROM
+#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET)
 	mac_read_from_eeprom();
 #endif
 
-- 
1.5.3.6