[U-Boot-Users] Release status - open patches, pull requests etc.

[U-Boot-Users] Release status - open patches, pull requests etc.

[Wolfgang Denk]

Hi everybody,

as you are probably aware of, we have only 4 more days with an open
merge window left (the merge window for 1.3.3 is open until Mar 31,
23:59:59 MET).


I think  I  have  now  applied  (or  rejected)  all  patches  I  felt
responsible  for  myself, i. e. which (in my opinion) don't fall into
the domain of some custodian.


Please come forward now if you have submitted any patches that should
go into 1.3.3 but are not in the master branch yet.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If programming was easy, they wouldn't need something as  complicated
as a human being to do it, now would they?
                       - L. Wall & R. L. Schwartz, _Programming Perl_

[U-Boot-Users] Release status - open patches, pull requests etc.

[Dirk Behme]

Wolfgang Denk wrote:
> Hi everybody,
> 
> as you are probably aware of, we have only 4 more days with an open
> merge window left (the merge window for 1.3.3 is open until Mar 31,
> 23:59:59 MET).
> 
> I think  I  have  now  applied  (or  rejected)  all  patches  I  felt
> responsible  for  myself, i. e. which (in my opinion) don't fall into
> the domain of some custodian.
> 
> Please come forward now if you have submitted any patches that should
> go into 1.3.3 but are not in the master branch yet.

I don't know Peter's planning, and yes, as it is ARM, Wolfgang you are 
not responsible for it. But it would be nice if we still can get

[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup

http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505

in.

Many thanks

Dirk

[U-Boot-Users] Release status - open patches, pull requests etc.

[Wolfgang Denk]

Dear Dirk,

in message <47EC0505.2010208@googlemail.com> you wrote:
>
> > Please come forward now if you have submitted any patches that should
> > go into 1.3.3 but are not in the master branch yet.
> 
> I don't know Peter's planning, and yes, as it is ARM, Wolfgang you are 
> not responsible for it. But it would be nice if we still can get
> 
> [PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
> 
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
> 
> in.

I would like to see this go in, too. It's been discussed long  enough
by now...


Peter, can you already estimate what you manage to get in befoire the
merge window closes?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to kill without reason
	-- Spock, "Journey to Babel", stardate 3842.4

[U-Boot-Users] Release status - open patches, pull requests etc.

[Peter Pearse]

 

> -----Original Message-----
> From: wd at denx.de [mailto:wd at denx.de] 
> Sent: 27 March 2008 22:16
> To: Dirk Behme
> Cc: Peter Pearse; u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] Release status - open patches, 
> pull requests etc.
> 
> Dear Dirk,
> 
> in message <47EC0505.2010208@googlemail.com> you wrote:
> >
> > > Please come forward now if you have submitted any patches that 
> > > should go into 1.3.3 but are not in the master branch yet.
> > 
> > I don't know Peter's planning, and yes, as it is ARM, 
> Wolfgang you are 
> > not responsible for it. But it would be nice if we still can get
> > 
> > [PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and 
> > cleanup
> > 
> > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38505
> > 
> > in.
> 
> I would like to see this go in, too. It's been discussed long 
>  enough by now...
> 
> 
> Peter, can you already estimate what you manage to get in 
> befoire the merge window closes?
> 

Patch status: (2008-03-28)

[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
Ready today

[PATCH] DM644x: This patch removes all boardspecific code from the arch.
part for DM644x (DaVinci) boards
[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based
on a DM6441
Awaiting resubmission after
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/

[PATCH] ixp: Support for NSLU2
Ready today/tomorrow

[PATCH] Altera Stratix II support
Ready todaytomorrow

[PATCH 0/7] Respin of Sascha Hauer's i.MX31support plus MX31ADS
Awaiting resolution of  [PATCH v2 4/7] add SMSC LAN9x1x Network driver
- I'll get the current submission ready today

Regards

Peter

[U-Boot-Users] Release status - open patches, pull requests etc.

[Wolfgang Denk]

In message <000001c890af$d33e9670$3a4d010a@Emea.Arm.com> you wrote:
>  
> [PATCH] DM644x: This patch removes all boardspecific code from the arch.
> part for DM644x (DaVinci) boards
> [PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based
> on a DM6441
> Awaiting resubmission after
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/

That was a mistake on my side - seems I missed one message on the
list. Please check again.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
HR Manager to job candidate "I see you've had no  computer  training.
Although  that  qualifies  you  for upper management, it means you're
under-qualified for our entry level positions."

[U-Boot-Users] Release status - open patches, pull requests etc.

[Peter Pearse]

 

> -----Original Message-----
> From: wd at denx.de [mailto:wd at denx.de] 
> Sent: 28 March 2008 09:11
> To: Peter Pearse
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] Release status - open patches, 
> pull requests etc.
> 
> In message <000001c890af$d33e9670$3a4d010a@Emea.Arm.com> you wrote:
> >  
> > [PATCH] DM644x: This patch removes all boardspecific code 
> from the arch.
> > part for DM644x (DaVinci) boards
> > [PATCH] DM644x: (2nd try) This adds support 
> fortheProdrivePMDRA board, 
> > based on a DM6441 Awaiting resubmission after 
> > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/
> 
> That was a mistake on my side - seems I missed one message on 
> the list. Please check again.

Patch status: (2008-03-28) Second version

[PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
Ready today

[PATCH] DM644x: This patch removes all boardspecific code from the arch.
part for DM644x (DaVinci) boards

[PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based
on a DM6441 
Ready tomorrow

[PATCH] ixp: Support for NSLU2
Ready today/tomorrow

[PATCH] Altera Stratix II support
Ready today/tomorrow

[PATCH 0/7] Respin of Sascha Hauer's i.MX31support plus MX31ADS Awaiting
resolution of  [PATCH v2 4/7] add SMSC LAN9x1x Network driver
- I'll get the current submission ready today

Regards

Peter

[U-Boot-Users] Release status - open patches, pull requests etc.

[Jean-Christophe PLAGNIOL-VILLARD]

On 09:28 Fri 28 Mar     , Peter Pearse wrote:
>  
> 
> > -----Original Message-----
> > From: wd at denx.de [mailto:wd at denx.de] 
> > Sent: 28 March 2008 09:11
> > To: Peter Pearse
> > Cc: u-boot-users at lists.sourceforge.net
> > Subject: Re: [U-Boot-Users] Release status - open patches, 
> > pull requests etc.
> > 
> > In message <000001c890af$d33e9670$3a4d010a@Emea.Arm.com> you wrote:
> > >  
> > > [PATCH] DM644x: This patch removes all boardspecific code 
> > from the arch.
> > > part for DM644x (DaVinci) boards
> > > [PATCH] DM644x: (2nd try) This adds support 
> > fortheProdrivePMDRA board, 
> > > based on a DM6441 Awaiting resubmission after 
> > > http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38498/
> > 
> > That was a mistake on my side - seems I missed one message on 
> > the list. Please check again.
> 
> Patch status: (2008-03-28) Second version
> 
> [PATCH v2] ARM: Davinci: Fix DM644x timer overflow handling and cleanup
> Ready today
> 
> [PATCH] DM644x: This patch removes all boardspecific code from the arch.
> part for DM644x (DaVinci) boards
> 
> [PATCH] DM644x: (2nd try) This adds support fortheProdrivePMDRA board, based
> on a DM6441 
> Ready tomorrow
> 
> [PATCH] ixp: Support for NSLU2
> Ready today/tomorrow
I'll take care of this and the AT91 patch today and tomorrow

Best Regards,
J.

[U-Boot-Users] Release status - open patches, pull requests etc.

[Haavard Skinnemoen]

Wolfgang Denk <wd@denx.de> wrote:
> Please come forward now if you have submitted any patches that should
> go into 1.3.3 but are not in the master branch yet.

Just FYI, I don't have any patches queued up for avr32 this time. If
anyone thinks I've missed something, please speak up.

Oh, and avr32 users: please give the latest 1.3.2 release from
ftp://ftp.denx.de/pub/u-boot/ a good testing, or grab the latest
sources from the master git repository. I'm not going to make any new
"atmel" releases until I've actually got something in my queue.

Haavard

[U-Boot-Users] Release status - open patches, pull requests etc.

[Larry Johnson]

Wolfgang Denk wrote:
> Hi everybody,
> 
> as you are probably aware of, we have only 4 more days with an open
> merge window left (the merge window for 1.3.3 is open until Mar 31,
> 23:59:59 MET).
> 
> 
> I think  I  have  now  applied  (or  rejected)  all  patches  I  felt
> responsible  for  myself, i. e. which (in my opinion) don't fall into
> the domain of some custodian.
> 
> 
> Please come forward now if you have submitted any patches that should
> go into 1.3.3 but are not in the master branch yet.

Hi Wolfgang,

I little while ago I submitted patches for two temperature sensors
drivers: a bug fix for the LM75 driver, and a bug fix and clean-up for
the LM73 driver.  The LM75 changes are in the master branch, but the
last time I checked the LM73 changes were not there.

Best regards,
Larry

[U-Boot-Users] Release status - open patches, pull requests etc.

[Wolfgang Denk]

In message <47ED105C.4060701@acm.org> you wrote:
> 
> I little while ago I submitted patches for two temperature sensors
> drivers: a bug fix for the LM75 driver, and a bug fix and clean-up for
> the LM73 driver.  The LM75 changes are in the master branch, but the
> last time I checked the LM73 changes were not there.

Thanks for the reminder. Applied now.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Unix is like a toll road on which you have to stop every 50  feet  to
pay another nickel. But hey! You only feel 5 cents poorer each time.
                 - Larry Wall in <1992Aug13.192357.15731@netlabs.com>

[U-Boot-Users] Release status - open patches, pull requests etc.

[David Saada]

Wolfgang Denk wrote:
> Hi everybody,
>
> as you are probably aware of, we have only 4 more days with an open
> merge window left (the merge window for 1.3.3 is open until Mar 31,
> 23:59:59 MET).
>
> I think  I  have  now  applied  (or  rejected)  all  patches  I  felt
> responsible  for  myself, i. e. which (in my opinion) don't fall into
> the domain of some custodian.
>
> Please come forward now if you have submitted any patches that should
> go into 1.3.3 but are not in the master branch yet.

Hello,
I have the following patches that weren't entered to the tree, as far as I've checked: 
 
MPC85xx, MPC83xx: Add/Fix UPM configuration support
QE IO: Add initial data to pin configuration + read/write functions
QE UEC: Add MII Commands
QE UEC: Extend number of supported UECs to 4
 
These patches are out for quite some time, and I was wandering about their faith. 
 
PS - I'm posting this message from home via my work's web mail client. I really hope it's not formatted as HTML (sorry in advance if it is).
David.
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080328/39dc02f9/attachment.htm 

[U-Boot-Users] Release status - open patches, pull requests etc.

[Andy Fleming]

On Fri, Mar 28, 2008 at 9:46 AM, David Saada <David.Saada@ecitele.com> wrote:
>
>
> Wolfgang Denk wrote:
> > Hi everybody,

> MPC85xx, MPC83xx: Add/Fix UPM configuration support
> QE IO: Add initial data to pin configuration + read/write functions
> QE UEC: Add MII Commands
> QE UEC: Extend number of supported UECs to 4

David, I ran into difficulties applying your QE IO patch, due to
mailer mangling again, I'm afraid.  It looked like there weren't *too*
many, so I may manage to do it by hand, but if you can find some way
to send me the 85xx-related patches in a non-mangled format, I would
definitely get them in before Monday.

Andy

[U-Boot-Users] Release status - open patches, pull requests etc.

[David Saada]

> David, I ran into difficulties applying your QE IO patch, due to
> mailer mangling again, I'm afraid.  It looked like there weren't *too*
> many, so I may manage to do it by hand, but if you can find some way
> to send me the 85xx-related patches in a non-mangled format, I would
> definitely get them in before Monday.

Andy,
I will resubmit the patches via the Nabble forum (no line wrapping problems there) tomorrow when I'm back at work. Only problem there is that you can't CC recipients in addition to the u-boot list, so please try following these patches on the list (will resubmit all four). 
David. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080329/098d09e8/attachment.htm 

[U-Boot-Users] Release status - open patches, pull requests etc.

[David Saada]

> David, I ran into difficulties applying your QE IO patch, due to
> mailer mangling again, I'm afraid.  It looked like there weren't *too*
> many, so I may manage to do it by hand, but if you can find some way
> to send me the 85xx-related patches in a non-mangled format, I would
> definitely get them in before Monday.

Andy,
I've resubmitted the following 3 patches:
- MPC85xx, MPC83xx: Add/Fix UPM configuration support
- QE UEC: Add MII Commands
- QE IO: Add initial data to pin configuration + read/write functions
(had to split this one to 3 parts)

I didn't CC you on the first two - please look for them in the list.
David.