[U-Boot-Users] [PATCH] Add support for hammerhead AVR32 board

[Ben Warren <bwarren@qstreams.com>]

Hi Alex,

Alex wrote:
> Hi
>
> Sorry, as you might have guessed I did not run MAKEALL to check my patch :-(
> Worse, It would have broken existing code... Sorry again.
>
> I try to avoid such things in future.
>
> I corrected the patch. I tried to run MAKEALL, but it fails, as I don't have all those cross-compilers
> installed. Am I missing something? Do I need to install them, or what is the correct procedure?
>
> So instead of MAKEALL I compiled a few targets by hand.
>
> Alex
>
>
> diff -Naur old/u-boot-avr32/board/miromico/hammerhead/eth.c new/u-boot-avr32/board/miromico/hammerhead/eth.c
> --- old/u-boot-avr32/board/miromico/hammerhead/eth.c	1970-01-01 01:00:00.000000000 +0100
> +++ new/u-boot-avr32/board/miromico/hammerhead/eth.c	2008-03-14 16:06:35.000000000 +0100
> @@ -0,0 +1,37 @@
> +/*
> + * Copyright (C) 2008 Miromico AG
> + *
> + * Ethernet initialization for the Miromico Hammerhead AVR32 board
> + *
> + * Mostly copied form Atmel ATNGW100 sources
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#include <common.h>
> +
> +#include <asm/arch/memory-map.h>
> +
> +extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
> +
> +#ifdef CONFIG_CMD_NET
> +void board_eth_initialize(bd_t *bi)
> +{
> +	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);
> +}
> +#endif
>   
I don't know the overall status of this patch set, but if you change the 
name of this function to board_eth_init(bd_t *bi), you won't need to 
touch /net/eth.c. Sorry for the churn...
<snip>
> diff -Naur old/u-boot-avr32/net/eth.c new/u-boot-avr32/net/eth.c
> --- old/u-boot-avr32/net/eth.c	2008-03-17 10:23:50.000000000 +0100
> +++ new/u-boot-avr32/net/eth.c	2008-03-17 10:11:33.000000000 +0100
> @@ -64,6 +64,7 @@
>   extern int mcffec_initialize(bd_t*);
>   extern int mcdmafec_initialize(bd_t*);
>   extern int at91cap9_eth_initialize(bd_t *);
> +extern int board_eth_initialize(bd_t *);
>
>   #ifdef CONFIG_API
>   extern void (*push_packet)(volatile void *, int);
> @@ -287,6 +288,9 @@
>   #if defined(CONFIG_AT91CAP9)
>   	at91cap9_eth_initialize(bis);
>   #endif
> +#if defined(CONFIG_HAMMERHEAD)
> +	board_eth_initialize(bis);
> +#endif
>
>   	if (!eth_devices) {
>   		puts ("No ethernet found.\n");
>
>   
I have a patch that will be submitted tomorrow that puts a call to 
board_eth_init() here, so you don't need to. If this is already in the 
AVR32 repo no big deal.

regards,
Ben