From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Schwarz Date: Tue, 01 Apr 2008 13:38:34 +0200 Subject: [U-Boot-Users] [PATCH] Add Vitesse 8601 support to TSEC driver In-Reply-To: <20080331131830.bdd5c146.kim.phillips@freescale.com> References: <1206714585-13569-1-git-send-email-tor@excito.com> <47F0EEBE.2010905@gmail.com> <20080331131830.bdd5c146.kim.phillips@freescale.com> Message-ID: <47F21EBA.9030504@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Kim, would it help if we donate one or two boards to the custodians ? Or do you have no time at all for specific testing ? After bring-up + validation I could offer 1-2 MPC8343B based boards with 2x VSC8601. The system also has a miniPCI Slot, USB-A and 512MB DDR-II Micron memory. Please let me know if you're interested. regards, Andre Schwarz Matrix Vision Kim Phillips schrieb: > On Mon, 31 Mar 2008 10:01:34 -0400 > Ben Warren wrote: > > >> Tor Krill wrote: >> >>> Add phy_info for Vitesse VSC8601. >>> Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. >>> >>> Signed-off-by: Tor Krill >>> >>> >> Acked-by: Ben Warren >> > > I don't have a Vitesse 8601, so technically I can't ack it, but I can: > > Reviewed-by: Kim Phillips > > minor nit: it would be nice if the following: > > >>> +#ifdef CFG_VSC8601_SKEWFIX >>> + {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL}, >>> +#endif >>> > > were made to have spaces after commas, and flow onto a separate > line so as to not be a 96 char line.. > > Kim > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20080401/7495f4a5/attachment.htm