[U-Boot-Users] which config to choose for MPC8347E cpu ?

["André Schwarz" <andre.schwarz@matrix-vision.de>]

Fathi,

there are 3 different MPC834x (3,7 and 9) which all have same silicon.
The difference is the package.

The 43 has a small package and the 49 a big one. The 47 is available in 
both. Package size defines PCI bus (small has 1x 32Bit, large has 64-Bit 
or 2x 32Bit) and memory bus width.

Which one do you have ?

I'm working with a 43 right now and it works fine.
My starting point has been the MPC8349EMDS.

I can share my config if you want to - please let me know.

regards,
Andr? Schwarz
Matrix Vision


Fathi Boudra schrieb:
> Hi,
> 
> I have a custom board with a MPC8347E and U-Boot doesn't have a config 
> for this cpu.
> which config is more appropriate to use for my board ? (maybe 
> MPC8349EMDS or sbc8349 or tqm834x ?).
> 
> any tips ? TIA.
> 
> cheers,
> 
> Fathi
> 
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users


MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler  - Registergericht: Amtsgericht Stuttgart, HRB 271090
Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner