public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot-Users] [PATCH] i.MX31: Fix architecture numbers for ADS and Litekit boards
@ 2008-04-20  8:35 Magnus Lilja
  2008-04-25  7:16 ` Wolfgang Denk
  0 siblings, 1 reply; 2+ messages in thread
From: Magnus Lilja @ 2008-04-20  8:35 UTC (permalink / raw)
  To: u-boot

Correct the Linux architecture number for i.MX31 Litekit and ADS boards.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
---

 board/imx31_litekit/imx31_litekit.c |    2 +-
 board/mx31ads/mx31ads.c             |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)


diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
index 5ba60e9..e0fbf25 100644
--- a/board/imx31_litekit/imx31_litekit.c
+++ b/board/imx31_litekit/imx31_litekit.c
@@ -52,7 +52,7 @@ int board_init (void)
 	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
 	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
 
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
 	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
 
 	return 0;
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
index 7c50c02..4fc95b4 100644
--- a/board/mx31ads/mx31ads.c
+++ b/board/mx31ads/mx31ads.c
@@ -81,7 +81,7 @@ int board_init (void)
 	readb(CS4_BASE + 8);
 	readb(CS4_BASE + 7);
 
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_arch_number = MACH_TYPE_MX31ADS;	/* board id for linux */
 	gd->bd->bi_boot_params = 0x80000100;	/* adress of boot parameters */
 
 	return 0;

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-04-25  7:16 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-20  8:35 [U-Boot-Users] [PATCH] i.MX31: Fix architecture numbers for ADS and Litekit boards Magnus Lilja
2008-04-25  7:16 ` Wolfgang Denk

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox