public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
@ 2008-04-21 17:22 Jean-Christophe PLAGNIOL-VILLARD
  2008-04-21 17:22 ` [U-Boot-Users] [PATCH 1/2] qemu-mips: add CFI support and coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
  2008-04-21 19:24 ` [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Wolfgang Denk
  0 siblings, 2 replies; 24+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2008-04-21 17:22 UTC (permalink / raw)
  To: u-boot

Move non-inlied functions into specific drivers file
Set get_prom as weak

Coding Style Cleanup

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vlad Lungu <vlad@comsys.ro>

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d5e413b..4131aad 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -42,7 +42,10 @@ COBJS-y += lan91c96.o
 COBJS-y += macb.o
 COBJS-y += mcffec.o
 COBJS-y += natsemi.o
-COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o
+ifeq ($(CONFIG_DRIVER_NE2000),y)
+COBJS-y += ne2000.o
+COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
+endif
 COBJS-y += netarm_eth.o
 COBJS-y += netconsole.o
 COBJS-y += ns7520_eth.o
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
new file mode 100644
index 0000000..39cd101
--- /dev/null
+++ b/drivers/net/ax88796.c
@@ -0,0 +1,156 @@
+/*
+ * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+#include "ax88796.h"
+
+/*
+ * Set 1 bit data
+ */
+static void ax88796_bitset(u32 bit)
+{
+	/* DATA1 */
+	if( bit )
+		EEDI_HIGH;
+	else
+		EEDI_LOW;
+
+	EECLK_LOW;
+	udelay(1000);
+	EECLK_HIGH;
+	udelay(1000);
+	EEDI_LOW;
+}
+
+/*
+ * Get 1 bit data
+ */
+static u8 ax88796_bitget(void)
+{
+	u8 bit;
+
+	EECLK_LOW;
+	udelay(1000);
+	/* DATA */
+	bit = EEDO;
+	EECLK_HIGH;
+	udelay(1000);
+
+	return bit;
+}
+
+/*
+ * Send COMMAND to EEPROM
+ */
+static void ax88796_eep_cmd(u8 cmd)
+{
+	ax88796_bitset(BIT_DUMMY);
+	switch(cmd){
+		case MAC_EEP_READ:
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			break;
+
+		case MAC_EEP_WRITE:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(1);
+			break;
+
+		case MAC_EEP_ERACE:
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			ax88796_bitset(1);
+			break;
+
+		case MAC_EEP_EWEN:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(0);
+			break;
+
+		case MAC_EEP_EWDS:
+			ax88796_bitset(1);
+			ax88796_bitset(0);
+			ax88796_bitset(0);
+			break;
+		default:
+			break;
+	}
+}
+
+static void ax88796_eep_setaddr(u16 addr)
+{
+	int i ;
+
+	for( i = 7 ; i >= 0 ; i-- )
+		ax88796_bitset(addr & (1 << i));
+}
+
+/*
+ * Get data from EEPROM
+ */
+static u16 ax88796_eep_getdata(void)
+{
+	ushort data = 0;
+	int i;
+
+	ax88796_bitget();	/* DUMMY */
+	for( i = 0 ; i < 16 ; i++ ){
+		data <<= 1;
+		data |= ax88796_bitget();
+	}
+	return data;
+}
+
+static void ax88796_mac_read(u8 *buff)
+{
+	int i ;
+	u16 data;
+	u16 addr = 0;
+
+	for( i = 0 ; i < 3; i++ )
+	{
+		EECS_HIGH;
+		EEDI_LOW;
+		udelay(1000);
+		/* READ COMMAND */
+		ax88796_eep_cmd(MAC_EEP_READ);
+		/* ADDRESS */
+		ax88796_eep_setaddr(addr++);
+		/* GET DATA */
+		data = ax88796_eep_getdata();
+		*buff++ = (uchar)(data & 0xff);
+		*buff++ = (uchar)((data >> 8) & 0xff);
+		EECLK_LOW;
+		EEDI_LOW;
+		EECS_LOW;
+	}
+}
+
+int get_prom(u8* mac_addr)
+{
+	u8 prom[32];
+	int i;
+
+	ax88796_mac_read(prom);
+	for (i = 0; i < 6; i++){
+		mac_addr[i] = prom[i];
+	}
+	return 1;
+}
diff --git a/drivers/net/ax88796.h b/drivers/net/ax88796.h
index 069ae80..aa342cb 100644
--- a/drivers/net/ax88796.h
+++ b/drivers/net/ax88796.h
@@ -79,139 +79,5 @@
 #endif
 
 
-/*
- * Set 1 bit data
- */
-static void ax88796_bitset(u32 bit)
-{
-	/* DATA1 */
-	if( bit )
-		EEDI_HIGH;
-	else
-		EEDI_LOW;
-
-	EECLK_LOW;
-	udelay(1000);
-	EECLK_HIGH;
-	udelay(1000);
-	EEDI_LOW;
-}
-
-/*
- * Get 1 bit data
- */
-static u8 ax88796_bitget(void)
-{
-	u8 bit;
-
-	EECLK_LOW;
-	udelay(1000);
-	/* DATA */
-	bit = EEDO;
-	EECLK_HIGH;
-	udelay(1000);
-
-	return bit;
-}
-
-/*
- * Send COMMAND to EEPROM
- */
-static void ax88796_eep_cmd(u8 cmd)
-{
-	ax88796_bitset(BIT_DUMMY);
-	switch(cmd){
-		case MAC_EEP_READ:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_WRITE:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_ERACE:
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			ax88796_bitset(1);
-			break;
-
-		case MAC_EEP_EWEN:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-
-		case MAC_EEP_EWDS:
-			ax88796_bitset(1);
-			ax88796_bitset(0);
-			ax88796_bitset(0);
-			break;
-		default:
-			break;
-	}
-}
-
-static void ax88796_eep_setaddr(u16 addr)
-{
-	int i ;
-	for( i = 7 ; i >= 0 ; i-- )
-		ax88796_bitset(addr & (1 << i));
-}
-
-/*
- * Get data from EEPROM
- */
-static u16 ax88796_eep_getdata(void)
-{
-	ushort data = 0;
-	int i;
-
-	ax88796_bitget();	/* DUMMY */
-	for( i = 0 ; i < 16 ; i++ ){
-		data <<= 1;
-		data |= ax88796_bitget();
-	}
-	return data;
-}
-
-static void ax88796_mac_read(u8 *buff)
-{
-	int i ;
-	u16 data, addr = 0;
-
-	for( i = 0 ; i < 3; i++ )
-	{
-		EECS_HIGH;
-		EEDI_LOW;
-		udelay(1000);
-		/* READ COMMAND */
-		ax88796_eep_cmd(MAC_EEP_READ);
-		/* ADDRESS */
-		ax88796_eep_setaddr(addr++);
-		/* GET DATA */
-		data = ax88796_eep_getdata();
-		*buff++ = (uchar)(data & 0xff);
-		*buff++ = (uchar)((data >> 8) & 0xff);
-		EECLK_LOW;
-		EEDI_LOW;
-		EECS_LOW;
-	}
-}
-
-int get_prom(u8* mac_addr)
-{
-	u8 prom[32];
-	int i;
-
-	ax88796_mac_read(prom);
-	for (i = 0; i < 6; i++){
-		mac_addr[i] = prom[i];
-	}
-	return 1;
-}
 
 #endif /* __DRIVERS_AX88796L_H__ */
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index 99baeea..3f32693 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -1,5 +1,5 @@
 /*
-Ported to U-Boot  by Christian Pellegrin <chri@ascensit.com>
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
 
 Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
 eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
@@ -23,7 +23,7 @@ Software Foundation; either version 2 or (at your option) any later version.
 
 eCos is distributed in the hope that it will be useful, but WITHOUT ANY
 WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 for more details.
 
 You should have received a copy of the GNU General Public License along
@@ -57,13 +57,13 @@ and are covered by the appropriate copyright disclaimers included herein.
 ==========================================================================
 #####DESCRIPTIONBEGIN####
 
-Author(s):    gthomas
-Contributors: gthomas, jskov, rsandifo
-Date:	      2001-06-13
+Author(s):	gthomas
+Contributors:	gthomas, jskov, rsandifo
+Date:		2001-06-13
 Purpose:
 Description:
 
-FIXME:	      Will fail if pinged with large packets (1520 bytes)
+FIXME:		Will fail if pinged with large packets (1520 bytes)
 Add promisc config
 Add SNMP
 
@@ -77,24 +77,26 @@ Add SNMP
 #include <net.h>
 #include <malloc.h>
 
-#define mdelay(n)       udelay((n)*1000)
+#define mdelay(n)	udelay((n)*1000)
 /* forward definition of function used for the uboot interface */
 void uboot_push_packet_len(int len);
 void uboot_push_tx_done(int key, int val);
 
 /*
-  ------------------------------------------------------------------------
-  Debugging details
-
-  Set to perms of:
-  0 disables all debug output
-  1 for process debug output
-  2 for added data IO output: get_reg, put_reg
-  4 for packet allocation/free output
-  8 for only startup status, so we can tell we're installed OK
-*/
-/*#define DEBUG 0xf*/
+ * Debugging details
+ *
+ * Set to perms of:
+ * 0 disables all debug output
+ * 1 for process debug output
+ * 2 for added data IO output: get_reg, put_reg
+ * 4 for packet allocation/free output
+ * 8 for only startup status, so we can tell we're installed OK
+ */
+#if 0
+#define DEBUG 0xf
+#else
 #define DEBUG 0
+#endif
 
 #if DEBUG & 1
 #define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
@@ -124,31 +126,35 @@ dp83902a_init(void)
 {
 	dp83902a_priv_data_t *dp = &nic;
 	u8* base;
+#if defined(NE2000_BASIC_INIT)
+	int i;
+#endif
 
 	DEBUG_FUNCTION();
 
 	base = dp->base;
-	if (!base) return false;  /* No device found */
+	if (!base)
+		return false;	/* No device found */
 
 	DEBUG_LINE();
 
 #if defined(NE2000_BASIC_INIT)
 	/* AX88796L doesn't need */
 	/* Prepare ESA */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);  /* Select page 1 */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1);	/* Select page 1 */
 	/* Use the address from the serial EEPROM */
 	for (i = 0; i < 6; i++)
 		DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);  /* Select page 0 */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0);	/* Select page 0 */
 
 	printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
-	       "eeprom",
-	       dp->esa[0],
-	       dp->esa[1],
-	       dp->esa[2],
-	       dp->esa[3],
-	       dp->esa[4],
-	       dp->esa[5] );
+		"eeprom",
+		dp->esa[0],
+		dp->esa[1],
+		dp->esa[2],
+		dp->esa[3],
+		dp->esa[4],
+		dp->esa[5] );
 
 #endif	/* NE2000_BASIC_INIT */
 	return true;
@@ -162,7 +168,7 @@ dp83902a_stop(void)
 
 	DEBUG_FUNCTION();
 
-	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);  /* Brutal */
+	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP);	/* Brutal */
 	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
 	DP_OUT(base, DP_IMR, 0x00);		/* Disable all interrupts */
 
@@ -170,11 +176,11 @@ dp83902a_stop(void)
 }
 
 /*
-  This function is called to "start up" the interface.  It may be called
-  multiple times, even when the hardware is already running.  It will be
-  called whenever something "hardware oriented" changes and should leave
-  the hardware ready to send/receive packets.
-*/
+ * This function is called to "start up" the interface. It may be called
+ * multiple times, even when the hardware is already running. It will be
+ * called whenever something "hardware oriented" changes and should leave
+ * the hardware ready to send/receive packets.
+ */
 static void
 dp83902a_start(u8 * enaddr)
 {
@@ -196,16 +202,16 @@ dp83902a_start(u8 * enaddr)
 	dp->tx_started = false;
 	dp->running = true;
 	DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
-	DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1); /* Receive ring boundary */
+	DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
 	DP_OUT(base, DP_PSTOP, dp->rx_buf_end);	/* Receive ring end page */
-	dp->rx_next = dp->rx_buf_start-1;
+	dp->rx_next = dp->rx_buf_start - 1;
 	dp->running = true;
 	DP_OUT(base, DP_ISR, 0xFF);		/* Clear any pending interrupts */
 	DP_OUT(base, DP_IMR, DP_IMR_All);	/* Enable all interrupts */
-	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);  /* Select page 1 */
-	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);   /* Current page - next free page for Rx */
+	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP);	/* Select page 1 */
+	DP_OUT(base, DP_P1_CURP, dp->rx_buf_start);	/* Current page - next free page for Rx */
 	dp->running = true;
-	for (i = 0;  i < ETHER_ADDR_LEN;  i++) {
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
 		/* FIXME */
 		/*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
 		 * 0x1400)) = enaddr[i];*/
@@ -214,15 +220,15 @@ dp83902a_start(u8 * enaddr)
 	/* Enable and start device */
 	DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
 	DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
-	DP_OUT(base, DP_RCR, DP_RCR_AB);  /* Accept broadcast, no errors, no multicast */
+	DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
 	dp->running = true;
 }
 
 /*
-  This routine is called to start the transmitter.  It is split out from the
-  data handling routine so it may be called either when data becomes first
-  available or when an Tx interrupt occurs
-*/
+ * This routine is called to start the transmitter. It is split out from the
+ * data handling routine so it may be called either when data becomes first
+ * available or when an Tx interrupt occurs
+ */
 
 static void
 dp83902a_start_xmit(int start_page, int len)
@@ -249,9 +255,9 @@ dp83902a_start_xmit(int start_page, int len)
 }
 
 /*
-  This routine is called to send data to the hardware.  It is known a-priori
-  that there is free buffer space (dp->tx_next).
-*/
+ * This routine is called to send data to the hardware. It is known a-priori
+ * that there is free buffer space (dp->tx_next).
+ */
 static void
 dp83902a_send(u8 *data, int total_len, u32 key)
 {
@@ -265,7 +271,8 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	DEBUG_FUNCTION();
 
 	len = pkt_len = total_len;
-	if (pkt_len < IEEE_8023_MIN_FRAME) pkt_len = IEEE_8023_MIN_FRAME;
+	if (pkt_len < IEEE_8023_MIN_FRAME)
+		pkt_len = IEEE_8023_MIN_FRAME;
 
 	start_page = dp->tx_next;
 	if (dp->tx_next == dp->tx_buf1) {
@@ -284,17 +291,19 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	printf("TX prep page %d len %d\n", start_page, pkt_len);
 #endif
 
-	DP_OUT(base, DP_ISR, DP_ISR_RDC);  /* Clear end of DMA */
+	DP_OUT(base, DP_ISR, DP_ISR_RDC);	/* Clear end of DMA */
 	{
-		/* Dummy read. The manual sez something slightly different, */
-		/* but the code is extended a bit to do what Hitachi's monitor */
-		/* does (i.e., also read data). */
+		/*
+		 * Dummy read. The manual sez something slightly different,
+		 * but the code is extended a bit to do what Hitachi's monitor
+		 * does (i.e., also read data).
+		 */
 
 		u16 tmp;
 		int len = 1;
 
-		DP_OUT(base, DP_RSAL, 0x100-len);
-		DP_OUT(base, DP_RSAH, (start_page-1) & 0xff);
+		DP_OUT(base, DP_RSAL, 0x100 - len);
+		DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
 		DP_OUT(base, DP_RBCL, len);
 		DP_OUT(base, DP_RBCH, 0);
 		DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
@@ -302,8 +311,10 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	}
 
 #ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/* Stall for a bit before continuing to work around random data */
-	/* corruption problems on some platforms. */
+	/*
+	 * Stall for a bit before continuing to work around random data
+	 * corruption problems on some platforms.
+	 */
 	CYGACC_CALL_IF_DELAY_US(1);
 #endif
 
@@ -336,16 +347,18 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 		printf("  + %d bytes of padding\n", pkt_len - total_len);
 #endif
 		/* Padding to 802.3 length was required */
-		for (i = total_len;  i < pkt_len;) {
+		for (i = total_len; i < pkt_len;) {
 			i++;
 			DP_OUT_DATA(dp->data, 0);
 		}
 	}
 
 #ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
-	/* After last data write, delay for a bit before accessing the */
-	/* device again, or we may get random data corruption in the last */
-	/* datum (on some platforms). */
+	/*
+	 * After last data write, delay for a bit before accessing the
+	 * device again, or we may get random data corruption in the last
+	 * datum (on some platforms).
+	 */
 	CYGACC_CALL_IF_DELAY_US(1);
 #endif
 
@@ -360,21 +373,21 @@ dp83902a_send(u8 *data, int total_len, u32 key)
 	/* Start transmit if not already going */
 	if (!dp->tx_started) {
 		if (start_page == dp->tx1) {
-			dp->tx_int = 1;  /* Expecting interrupt from BUF1 */
+			dp->tx_int = 1; /* Expecting interrupt from BUF1 */
 		} else {
-			dp->tx_int = 2;  /* Expecting interrupt from BUF2 */
+			dp->tx_int = 2; /* Expecting interrupt from BUF2 */
 		}
 		dp83902a_start_xmit(start_page, pkt_len);
 	}
 }
 
 /*
-  This function is called when a packet has been received.  It's job is
-  to prepare to unload the packet from the hardware.  Once the length of
-  the packet is known, the upper layer of the driver can be told.  When
-  the upper layer is ready to unload the packet, the internal function
-  'dp83902a_recv' will be called to actually fetch it from the hardware.
-*/
+ * This function is called when a packet has been received. It's job is
+ * to prepare to unload the packet from the hardware. Once the length of
+ * the packet is known, the upper layer of the driver can be told. When
+ * the upper layer is ready to unload the packet, the internal function
+ * 'dp83902a_recv' will be called to actually fetch it from the hardware.
+ */
 static void
 dp83902a_RxEvent(void)
 {
@@ -407,9 +420,9 @@ dp83902a_RxEvent(void)
 		DP_OUT(base, DP_RSAH, pkt);
 		if (dp->rx_next == pkt) {
 			if (cur == dp->rx_buf_start)
-				DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+				DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
 			else
-				DP_OUT(base, DP_BNDRY, cur-1); /* Update pointer */
+				DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
 			return;
 		}
 		dp->rx_next = pkt;
@@ -420,13 +433,13 @@ dp83902a_RxEvent(void)
 #endif
 
 		/* read header (get data size)*/
-		for (i = 0;  i < sizeof(rcv_hdr);) {
+		for (i = 0; i < sizeof(rcv_hdr);) {
 			DP_IN_DATA(dp->data, rcv_hdr[i++]);
 		}
 
 #if DEBUG & 5
 		printf("rx hdr %02x %02x %02x %02x\n",
-		       rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+			rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
 #endif
 		len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
 
@@ -434,19 +447,19 @@ dp83902a_RxEvent(void)
 		uboot_push_packet_len(len);
 
 		if (rcv_hdr[1] == dp->rx_buf_start)
-			DP_OUT(base, DP_BNDRY, dp->rx_buf_end-1);
+			DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
 		else
-			DP_OUT(base, DP_BNDRY, rcv_hdr[1]-1); /* Update pointer */
+			DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
 	}
 }
 
 /*
-  This function is called as a result of the "eth_drv_recv()" call above.
-  It's job is to actually fetch data for a packet from the hardware once
-  memory buffers have been allocated for the packet.  Note that the buffers
-  may come in pieces, using a scatter-gather list.  This allows for more
-  efficient processing in the upper layers of the stack.
-*/
+ * This function is called as a result of the "eth_drv_recv()" call above.
+ * It's job is to actually fetch data for a packet from the hardware once
+ * memory buffers have been allocated for the packet. Note that the buffers
+ * may come in pieces, using a scatter-gather list. This allows for more
+ * efficient processing in the upper layers of the stack.
+ */
 static void
 dp83902a_recv(u8 *data, int len)
 {
@@ -478,7 +491,7 @@ dp83902a_recv(u8 *data, int len)
 #endif
 
 	saved = false;
-	for (i = 0;  i < 1;  i++) {
+	for (i = 0; i < 1; i++) {
 		if (data) {
 			mlen = len;
 #if DEBUG & 4
@@ -545,8 +558,10 @@ dp83902a_TxEvent(void)
 	uboot_push_tx_done(key, 0);
 }
 
-/* Read the tally counters to clear them.  Called in response to a CNT */
-/* interrupt. */
+/*
+ * Read the tally counters to clear them. Called in response to a CNT
+ * interrupt.
+ */
 static void
 dp83902a_ClearCounters(void)
 {
@@ -560,8 +575,10 @@ dp83902a_ClearCounters(void)
 	DP_OUT(base, DP_ISR, DP_ISR_CNT);
 }
 
-/* Deal with an overflow condition.  This code follows the procedure set */
-/* out in section 7.0 of the datasheet. */
+/*
+ * Deal with an overflow condition. This code follows the procedure set
+ * out in section 7.0 of the datasheet.
+ */
 static void
 dp83902a_Overflow(void)
 {
@@ -581,9 +598,11 @@ dp83902a_Overflow(void)
 	DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
 	DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
 
-	/* Read in as many packets as we can and acknowledge any and receive */
-	/* interrupts.  Since the buffer has overflowed, a receive event of */
-	/* some kind will have occured. */
+	/*
+	 * Read in as many packets as we can and acknowledge any and receive
+	 * interrupts. Since the buffer has overflowed, a receive event of
+	 * some kind will have occured.
+	 */
 	dp83902a_RxEvent();
 	DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
 
@@ -591,8 +610,10 @@ dp83902a_Overflow(void)
 	DP_OUT(base, DP_ISR, DP_ISR_OFLW);
 	DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
 
-	/* If a transmit command was issued, but no transmit event has occured, */
-	/* restart it here. */
+	/*
+	 * If a transmit command was issued, but no transmit event has occured,
+	 * restart it here.
+	 */
 	DP_IN(base, DP_ISR, isr);
 	if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
 		DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
@@ -609,25 +630,33 @@ dp83902a_poll(void)
 	DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
 	DP_IN(base, DP_ISR, isr);
 	while (0 != isr) {
-		/* The CNT interrupt triggers when the MSB of one of the error */
-		/* counters is set.  We don't much care about these counters, but */
-		/* we should read their values to reset them. */
+		/*
+		 * The CNT interrupt triggers when the MSB of one of the error
+		 * counters is set. We don't much care about these counters, but
+		 * we should read their values to reset them.
+		 */
 		if (isr & DP_ISR_CNT) {
 			dp83902a_ClearCounters();
 		}
-		/* Check for overflow.  It's a special case, since there's a */
-		/* particular procedure that must be followed to get back into */
-		/* a running state.a */
+		/*
+		 * Check for overflow. It's a special case, since there's a
+		 * particular procedure that must be followed to get back into
+		 * a running state.a
+		 */
 		if (isr & DP_ISR_OFLW) {
 			dp83902a_Overflow();
 		} else {
-			/* Other kinds of interrupts can be acknowledged simply by */
-			/* clearing the relevant bits of the ISR.  Do that now, then */
-			/* handle the interrupts we care about. */
-			DP_OUT(base, DP_ISR, isr);      /* Clear set bits */
+			/*
+			 * Other kinds of interrupts can be acknowledged simply by
+			 * clearing the relevant bits of the ISR. Do that now, then
+			 * handle the interrupts we care about.
+			 */
+			DP_OUT(base, DP_ISR, isr);	/* Clear set bits */
 			if (!dp->running) break;	/* Is this necessary? */
-			/* Check for tx_started on TX event since these may happen */
-			/* spuriously it seems. */
+			/*
+			 * Check for tx_started on TX event since these may happen
+			 * spuriously it seems.
+			 */
 			if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
 				dp83902a_TxEvent();
 			}
@@ -658,8 +687,8 @@ typedef struct hw_info_t {
 #define HAS_MII		0x40
 #define USE_SHMEM	0x80	/* autodetected */
 
-#define AM79C9XX_HOME_PHY	0x00006B90  /* HomePNA PHY */
-#define AM79C9XX_ETH_PHY	0x00006B70  /* 10baseT PHY */
+#define AM79C9XX_HOME_PHY	0x00006B90	/* HomePNA PHY */
+#define AM79C9XX_ETH_PHY	0x00006B70	/* 10baseT PHY */
 #define MII_PHYID_REV_MASK	0xfffffff0
 #define MII_PHYID_REG1		0x02
 #define MII_PHYID_REG2		0x03
@@ -669,7 +698,7 @@ static hw_info_t hw_info[] = {
 	{ /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
 	{ /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
 	{ /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
-	  DELAY_OUTPUT | HAS_IBM_MISC },
+			DELAY_OUTPUT | HAS_IBM_MISC },
 	{ /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
 	{ /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
 	{ /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
@@ -677,48 +706,48 @@ static hw_info_t hw_info[] = {
 	{ /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
 	{ /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
 	{ /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
 	{ /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
 	{ /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
 	{ /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
 	{ /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
 	{ /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
 	{ /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
 	{ /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
 	{ /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
-	  HAS_MISC_REG | HAS_IBM_MISC },
+			HAS_MISC_REG | HAS_IBM_MISC },
 	{ /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
 	{ /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
 	{ /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
 	{ /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
-	  DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
+			DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
 	{ /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
 	{ /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
 	{ /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
@@ -729,8 +758,6 @@ static hw_info_t hw_info[] = {
 
 #define NR_INFO		(sizeof(hw_info)/sizeof(hw_info_t))
 
-static hw_info_t default_info = { 0, 0, 0, 0, 0 };
-
 u8 dev_addr[6];
 
 #define PCNET_CMD	0x00
@@ -738,17 +765,104 @@ u8 dev_addr[6];
 #define PCNET_RESET	0x1f	/* Issue a read to reset, a write to clear. */
 #define PCNET_MISC	0x18	/* For IBM CCAE and Socket EA cards */
 
+static void pcnet_reset_8390(void)
+{
+	int i, r;
+
+	PRINTK("nic base is %lx\n", nic_base);
+
+	n2k_outb(E8390_NODMA + E8390_PAGE0+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+	PRINTK("cmd (at %lx) is %x\n", nic_base + E8390_CMD, n2k_inb(E8390_CMD));
+	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
+
+	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
+
+	for (i = 0; i < 100; i++) {
+		if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
+			break;
+		PRINTK("got %x in reset\n", r);
+		udelay(100);
+	}
+	n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
+
+	if (i == 100)
+		printf("pcnet_reset_8390() did not complete.\n");
+} /* pcnet_reset_8390 */
+
+int get_prom(u8* mac_addr) __attribute__ ((weak, alias ("__get_prom")));
+int __get_prom(u8* mac_addr)
+{
+	u8 prom[32];
+	int i, j;
+	struct {
+		u_char value, offset;
+	} program_seq[] = {
+		{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
+		{0x48, EN0_DCFG},		/* Set byte-wide (0x48) access. */
+		{0x00, EN0_RCNTLO},		/* Clear the count regs. */
+		{0x00, EN0_RCNTHI},
+		{0x00, EN0_IMR},		/* Mask completion irq. */
+		{0xFF, EN0_ISR},
+		{E8390_RXOFF, EN0_RXCR},	/* 0x20 Set to monitor */
+		{E8390_TXOFF, EN0_TXCR},	/* 0x02 and loopback mode. */
+		{32, EN0_RCNTLO},
+		{0x00, EN0_RCNTHI},
+		{0x00, EN0_RSARLO},		/* DMA starting@0x0000. */
+		{0x00, EN0_RSARHI},
+		{E8390_RREAD+E8390_START, E8390_CMD},
+	};
+
+	PRINTK ("trying to get MAC via prom reading\n");
+
+	pcnet_reset_8390 ();
+
+	mdelay (10);
+
+	for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
+		n2k_outb (program_seq[i].value, program_seq[i].offset);
+
+	PRINTK ("PROM:");
+	for (i = 0; i < 32; i++) {
+		prom[i] = n2k_inb (PCNET_DATAPORT);
+		PRINTK (" %02x", prom[i]);
+	}
+	PRINTK ("\n");
+	for (i = 0; i < NR_INFO; i++) {
+		if ((prom[0] == hw_info[i].a0) &&
+			(prom[2] == hw_info[i].a1) &&
+			(prom[4] == hw_info[i].a2)) {
+			PRINTK ("matched board %d\n", i);
+			break;
+		}
+	}
+	if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
+		PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
+		PRINTK ("MAC address is ");
+		for (j = 0; j < 6; j++) {
+			mac_addr[j] = prom[j << 1];
+			PRINTK ("%02x:", mac_addr[i]);
+		}
+		PRINTK ("\n");
+		return (i < NR_INFO) ? i : 0;
+	}
+	return 0;
+}
+
 u32 nic_base;
 
 /* U-boot specific routines */
 static u8 *pbuf = NULL;
 
 static int pkey = -1;
-static int initialized=0;
+static int initialized = 0;
 
 void uboot_push_packet_len(int len) {
 	PRINTK("pushed len = %d\n", len);
-	if (len>=2000) {
+	if (len >= 2000) {
 		printf("NE2000: packet too big\n");
 		return;
 	}
@@ -764,7 +878,7 @@ void uboot_push_tx_done(int key, int val) {
 }
 
 int eth_init(bd_t *bd) {
-	static hw_info_t * r;
+	int r;
 	char ethaddr[20];
 
 	PRINTK("### eth_init\n");
@@ -779,7 +893,7 @@ int eth_init(bd_t *bd) {
 
 #ifdef CONFIG_DRIVER_NE2000_CCR
 	{
-		vu_char *p =  (vu_char *) CONFIG_DRIVER_NE2000_CCR;
+		vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
 
 		PRINTK("CCR before is %x\n", *p);
 		*p = CONFIG_DRIVER_NE2000_VAL;
@@ -811,7 +925,7 @@ int eth_init(bd_t *bd) {
 		return -1;
 
 	dp83902a_start(dev_addr);
-	initialized=1;
+	initialized = 1;
 
 	return 0;
 }
@@ -821,7 +935,7 @@ void eth_halt() {
 	PRINTK("### eth_halt\n");
 	if(initialized)
 		dp83902a_stop();
-	initialized=0;
+	initialized = 0;
 }
 
 int eth_rx() {
diff --git a/drivers/net/ne2000.h b/drivers/net/ne2000.h
index d324a00..0b21612 100644
--- a/drivers/net/ne2000.h
+++ b/drivers/net/ne2000.h
@@ -81,6 +81,7 @@ are GPL, so this is, of course, GPL.
 
 #define DP_DATA     0x10
 #define START_PG    0x50    /* First page of TX buffer */
+#define START_PG2   0x48
 #define STOP_PG     0x80    /* Last page +1 of RX ring */
 
 #define RX_START    0x50
@@ -90,90 +91,4 @@ are GPL, so this is, of course, GPL.
 #define DP_OUT(_b_, _o_, _d_) *( (vu_char *) ((_b_)+(_o_))) = (_d_)
 #define DP_IN_DATA(_b_, _d_)  (_d_) = *( (vu_char *) ((_b_)))
 #define DP_OUT_DATA(_b_, _d_) *( (vu_char *) ((_b_))) = (_d_)
-
-static void pcnet_reset_8390(void)
-{
-	int i, r;
-
-	PRINTK("nic base is %lx\n", nic_base);
-
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-	PRINTK("cmd (at %lx) is %x\n", nic_base+ E8390_CMD, n2k_inb(E8390_CMD));
-	n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
-
-	n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
-
-	for (i = 0; i < 100; i++) {
-		if ((r = (n2k_inb(EN0_ISR) & ENISR_RESET)) != 0)
-			break;
-		PRINTK("got %x in reset\n", r);
-		udelay(100);
-	}
-	n2k_outb(ENISR_RESET, EN0_ISR); /* Ack intr. */
-
-	if (i == 100)
-		printf("pcnet_reset_8390() did not complete.\n");
-} /* pcnet_reset_8390 */
-
-int get_prom(u8* mac_addr)
-{
-	u8 prom[32];
-	int i, j;
-	struct {
-		u_char value, offset;
-	} program_seq[] = {
-		{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
-		{0x48,  EN0_DCFG},		/* Set byte-wide (0x48) access. */
-		{0x00,  EN0_RCNTLO},		/* Clear the count regs. */
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_IMR},		/* Mask completion irq. */
-		{0xFF,  EN0_ISR},
-		{E8390_RXOFF, EN0_RXCR},	/* 0x20  Set to monitor */
-		{E8390_TXOFF, EN0_TXCR},	/* 0x02  and loopback mode. */
-		{32,    EN0_RCNTLO},
-		{0x00,  EN0_RCNTHI},
-		{0x00,  EN0_RSARLO},		/* DMA starting@0x0000. */
-		{0x00,  EN0_RSARHI},
-		{E8390_RREAD+E8390_START, E8390_CMD},
-	};
-
-	PRINTK ("trying to get MAC via prom reading\n");
-
-	pcnet_reset_8390 ();
-
-	mdelay (10);
-
-	for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++)
-		n2k_outb (program_seq[i].value, program_seq[i].offset);
-
-	PRINTK ("PROM:");
-	for (i = 0; i < 32; i++) {
-		prom[i] = n2k_inb (PCNET_DATAPORT);
-		PRINTK (" %02x", prom[i]);
-	}
-	PRINTK ("\n");
-	for (i = 0; i < NR_INFO; i++) {
-		if ((prom[0] == hw_info[i].a0) &&
-		    (prom[2] == hw_info[i].a1) &&
-		    (prom[4] == hw_info[i].a2)) {
-			PRINTK ("matched board %d\n", i);
-			break;
-		}
-	}
-	if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
-		PRINTK ("on exit i is %d/%ld\n", i, NR_INFO);
-		PRINTK ("MAC address is ");
-		for (j = 0; j < 6; j++) {
-			mac_addr[j] = prom[j << 1];
-			PRINTK ("%02x:", mac_addr[i]);
-		}
-		PRINTK ("\n");
-		return (i < NR_INFO) ? i : 0;
-	}
-	return NULL;
-}
 #endif /* __DRIVERS_NE2000_H__ */
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
index 1badf62..d8768e8 100644
--- a/drivers/net/ne2000_base.h
+++ b/drivers/net/ne2000_base.h
@@ -120,7 +120,6 @@ typedef struct dp83902a_priv_data {
  ------------------------------------------------------------------------
  Some forward declarations
 */
-int get_prom( u8* mac_addr);
 static void dp83902a_poll(void);
 
 /* ------------------------------------------------------------------------ */
-- 
1.5.4.5

^ permalink raw reply related	[flat|nested] 24+ messages in thread
end of thread, other threads:[~2008-04-25  7:16 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-21 17:22 [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:22 ` [U-Boot-Users] [PATCH 1/2] qemu-mips: add CFI support and coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:22   ` [U-Boot-Users] [PATCH 2/2] qemu-mips: add full functionnalty and support of CONFIG_SMALLEST Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 17:48     ` [U-Boot-Users] [PATCH 2/2 V2] " Jean-Christophe PLAGNIOL-VILLARD
2008-04-21 19:26       ` Wolfgang Denk
2008-04-22  6:26         ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-22 10:01           ` Wolfgang Denk
2008-04-22  7:26         ` Shinya Kuribayashi
2008-04-22  7:38           ` Shinya Kuribayashi
2008-04-22 15:10   ` [U-Boot-Users] [PATCH 1/2][MIPS] qemu-mips: Cleanup whiespaces, tab indentations, etc Shinya Kuribayashi
2008-04-22 15:32     ` Wolfgang Denk
2008-04-22 15:35       ` Shinya Kuribayashi
2008-04-22 20:50       ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-23  2:02         ` Shinya Kuribayashi
2008-04-25  7:16           ` Wolfgang Denk
2008-04-22 15:11   ` [U-Boot-Users] [PATCH 2/2][MIPS] qemu-mips.h: Add CFI support Shinya Kuribayashi
2008-04-25  7:16     ` Wolfgang Denk
2008-04-21 19:24 ` [U-Boot-Users] [PATCH 0/2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Wolfgang Denk
2008-04-22  6:28   ` Jean-Christophe PLAGNIOL-VILLARD
2008-04-22 10:02     ` Wolfgang Denk
     [not found]       ` <1209015794-9805-1-git-send-email-plagnioj@jcrosoft.com>
2008-04-24  5:43         ` [U-Boot-Users] [PATCH 1/1] " Jean-Christophe PLAGNIOL-VILLARD
2008-04-24  5:57           ` [U-Boot-Users] [PATCH 0/1 V2] NE2000: coding style cleanup Jean-Christophe PLAGNIOL-VILLARD
2008-04-24  5:57             ` [U-Boot-Users] [PATCH 1/1 V2] NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 Jean-Christophe PLAGNIOL-VILLARD
2008-04-25  7:16             ` [U-Boot-Users] [PATCH 0/1 V2] NE2000: coding style cleanup Wolfgang Denk

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox