From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jens Gehrlein <sew_s@tqs.de>
Date: Wed, 14 May 2008 09:08:45 +0200
Subject: [U-Boot-Users] Loading a kernel on MX31ADS using U-boot
In-Reply-To: <Pine.LNX.4.64.0804122151500.7819@axis700.grange>
References: <968107.30460.qm@web51006.mail.re2.yahoo.com>
	<Pine.LNX.4.64.0804122151500.7819@axis700.grange>
Message-ID: <482A8FFD.1070102@tqs.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Guennadi,

Guennadi Liakhovetski schrieb:

...

Apart from that, verify that your console=
> command line parameter is correct, your machine ID matches, and that you 
> don't have a jtag debugger like bdi2000 connected when you're trying to 
> boot.

I have the same problem on our board: I don't see the console outputs if 
the BDI2000 cable is connected to the target, although the BDI is in 
mode "reset run". Do have an idea why?

Best Regards,
Jens