[U-Boot-Users] RapidIO on custom board (MPC8548 )

[John Traill <john.traill@freescale.com>]

Adam,

Make sure you have matching common transport sizes in your system - Section 4.4.3.16 RapidIO System Size in the 8548 manual.


Adam Nowak wrote:
> I have to configure the system (u-boot, kernel) and create the RIO
> driver. Could you advise me how to fix my current problem?
> 
> a) Kernel log:
> ...
> Setting up RapidIO peer-to-peer network /soc8548 at e0000000/rapidi0
> RIO: Of-device full name /soc8548 at e0000000/rapidio at c0000      
> RIO: LAW start 0x00000000c0000000, size 0x0000000020000000.   
> RIO: Regs start 0xe00c0000 size 0x00020000  
> [there are not any next messages, the board hung up]
> 
> b) Corresponding Source Code
> The kernel hung up in the file
> linux-2.6.23/arch/powerpc/sysdev/fsl_rio.c
> Function fsl_rio_setup() is executed but it hung on in_be32(regs_win +
> RIO_CCSR);
> 
> c) u-boot configuration
> #define	CONFIG_RIO 1
> #define CFG_RIO_MEM_BASE 0xC0000000
> #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
> 
> d) Device Tree Source
>  rapidio at c0000 {
>   compatible = "fsl,rapidio-delta";
>   #address-cells = <2>;
>   #size-cells = <2>;
>   reg = <c0000 20000>;
>   ranges = <0 0 c0000000 20000000>;
>   interrupt-parent = <&mpic>;
>   interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
>  };
> 
> If you can not advise me on technical aspects, tell me please what I
> should read to understand initialization of RIO in the kernel.
> 
> Thanks,
> Adam
> 
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft 
> Defy all challenges. Microsoft(R) Visual Studio 2008. 
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users

-- 
John Traill
Systems Engineer
Network and Computing Systems Group

Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland

Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790

E-mail: john.traill at freescale.com

Registration Number: SC262720
VAT Number: GB831329053

[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary