[U-Boot-Users] [PATCH] Add support for Marvell 88E1118 phy to drivers/net/tsec.c

[Ben Warren <biggerbadderben@gmail.com>]

Hi Ron,

Ron Madrid wrote:
> Add support for Marvell 88E1118 phy to
> drivers/net/tsec.c
>
> Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
>
> --- clean_u-boot-1.3.3/drivers/net/tsec.c	2008-05-19
> 03:47:11.000000000 -0700
> +++ u-boot-1.3.3/drivers/net/tsec.c	2008-05-20
> 12:40:14.000000000 -0700
>   
The content of this patch looks OK, but the patch itself is mangled.  
Please use git tools to create your patches, then re-submit.
> @@ -1128,6 +1128,36 @@ struct phy_info
> phy_info_M88E1111S = {
>  			   },
>  };
>  
> +struct phy_info phy_info_M88E1118 = {
> +	0x01410e1,
> +	"Marvell 88E1118",
> +	4,
> +	(struct phy_cmd[]){	/* config */
> +		/* Reset and configure the PHY */
> +		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> +		{0x16, 0x0002, NULL}, /* Change Page Number */
> +		{0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
> +		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> +		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> +		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> +		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> +		{miim_end,}
> +		},
> +	(struct phy_cmd[]){	/* startup */
> +		{0x16, 0x0000, NULL}, /* Change Page Number */
> +		/* Status is read once to clear old link state */
> +		{MIIM_STATUS, miim_read, NULL},
> +		/* Auto-negotiate */
> +		/* Read the status */
> +		{MIIM_88E1011_PHY_STATUS, miim_read,
> +		 &mii_parse_88E1011_psr},
> +		{miim_end,}
> +		},
> +	(struct phy_cmd[]){	/* shutdown */
> +		{miim_end,}
> +		},
> +};
> +
>  static unsigned int m88e1145_setmode(uint mii_reg,
> struct tsec_private *priv)
>  {
>  	uint mii_data = read_phy_reg(priv, mii_reg);
> @@ -1492,6 +1522,7 @@ struct phy_info *phy_info[] = {
>  	&phy_info_BCM5464S,
>  	&phy_info_M88E1011S,
>  	&phy_info_M88E1111S,
> +	&phy_info_M88E1118,
>  	&phy_info_M88E1145,
>  	&phy_info_M88E1149S,
>  	&phy_info_dm9161,
>
>
>   
regards,
Ben