From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Warren Date: Thu, 22 May 2008 23:21:41 -0700 Subject: [U-Boot-Users] [PATCH] Add support for Marvell 88E1118 phy to drivers/net/tsec.c In-Reply-To: <50836.52519.qm@web83515.mail.sp1.yahoo.com> References: <50836.52519.qm@web83515.mail.sp1.yahoo.com> Message-ID: <48366275.3020403@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Ron, Ron Madrid wrote: > Add support for Marvell 88E1118 phy to > drivers/net/tsec.c > > Signed-off-by: Ron Madrid > > --- clean_u-boot-1.3.3/drivers/net/tsec.c 2008-05-19 > 03:47:11.000000000 -0700 > +++ u-boot-1.3.3/drivers/net/tsec.c 2008-05-20 > 12:40:14.000000000 -0700 > The content of this patch looks OK, but the patch itself is mangled. Please use git tools to create your patches, then re-submit. > @@ -1128,6 +1128,36 @@ struct phy_info > phy_info_M88E1111S = { > }, > }; > > +struct phy_info phy_info_M88E1118 = { > + 0x01410e1, > + "Marvell 88E1118", > + 4, > + (struct phy_cmd[]){ /* config */ > + /* Reset and configure the PHY */ > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, > + {0x16, 0x0002, NULL}, /* Change Page Number */ > + {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */ > + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, > + {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, > + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, > + {miim_end,} > + }, > + (struct phy_cmd[]){ /* startup */ > + {0x16, 0x0000, NULL}, /* Change Page Number */ > + /* Status is read once to clear old link state */ > + {MIIM_STATUS, miim_read, NULL}, > + /* Auto-negotiate */ > + /* Read the status */ > + {MIIM_88E1011_PHY_STATUS, miim_read, > + &mii_parse_88E1011_psr}, > + {miim_end,} > + }, > + (struct phy_cmd[]){ /* shutdown */ > + {miim_end,} > + }, > +}; > + > static unsigned int m88e1145_setmode(uint mii_reg, > struct tsec_private *priv) > { > uint mii_data = read_phy_reg(priv, mii_reg); > @@ -1492,6 +1522,7 @@ struct phy_info *phy_info[] = { > &phy_info_BCM5464S, > &phy_info_M88E1011S, > &phy_info_M88E1111S, > + &phy_info_M88E1118, > &phy_info_M88E1145, > &phy_info_M88E1149S, > &phy_info_dm9161, > > > regards, Ben