From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ben Warren <bwarren@qstreams.com>
Date: Thu, 22 May 2008 23:25:11 -0700
Subject: [U-Boot-Users] [PATCH v3] smc911x: add 16 bit support
In-Reply-To: <20080505120012.13618.42689.stgit@tq-sewsrv-4.tq-net.de>
References: <20080505120012.13618.42689.stgit@tq-sewsrv-4.tq-net.de>
Message-ID: <48366347.3060008@qstreams.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Jens Gehrlein wrote:
> Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
> ---
> Hi,
>
> third attempt:
> wrapped the long line, fixed typo, extended README
> file and avoided e-mail text above the separator :-)
>
> Sorry, I'm not a raw recruit but I didn't issue many
> patches so far.
>
> The title should go into the commit text, so it won't
> appear twice. Or do you wish a more detailed description?
>
> Perhaps some corrections concerning English wording in the
> README file are necessary?
>
>
>  README                |   15 +++++++++++++++
>  drivers/net/smc911x.c |   21 +++++++++++++++++++--
>  2 files changed, 34 insertions(+), 2 deletions(-)
>
>
> diff --git a/README b/README
> index 36ae0fb..67e3152 100644
> --- a/README
> +++ b/README
> @@ -787,6 +787,21 @@ The following options need to be configured:
>  			Define this to use i/o functions instead of macros
>  			(some hardware wont work with macros)
>  
> +		CONFIG_DRIVER_SMC911X
> +		Support for SMSC's LAN911x and LAN921x chips
> +
> +			CONFIG_DRIVER_SMC911X_BASE
> +			Define this to hold the physical address
> +			of the device (I/O space)
> +
> +			CONFIG_DRIVER_SMC911X_32_BIT
> +			Define this if data bus is 32 bits
> +
> +			CONFIG_DRIVER_SMC911X_16_BIT
> +			Define this if data bus is 16 bits. If your processor
> +			automatically converts one 32 bit word to two 16 bit
> +			words you may also try CONFIG_DRIVER_SMC911X_32_BIT.
> +
>  - USB Support:
>  		At the moment only the UHCI host controller is
>  		supported (PIP405, MIP405, MPC5200); define
> diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
> index d22c889..f978762 100644
> --- a/drivers/net/smc911x.c
> +++ b/drivers/net/smc911x.c
> @@ -30,6 +30,12 @@
>  #include <net.h>
>  #include <miiphy.h>
>  
> +#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
> +	defined (CONFIG_DRIVER_SMC911X_16_BIT)
> +#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
> +	CONFIG_DRIVER_SMC911X_16_BIT shall be set"
> +#endif
> +
>  #ifdef CONFIG_DRIVER_SMC911X_32_BIT
>  static inline u32 reg_read(u32 addr)
>  {
> @@ -39,9 +45,20 @@ static inline void reg_write(u32 addr, u32 val)
>  {
>  	*(volatile u32*)addr = val;
>  }
> +#elif CONFIG_DRIVER_SMC911X_16_BIT
> +static inline u32 reg_read(u32 addr)
> +{
> +	volatile u16 *addr_16 = (u16 *)addr;
> +	return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
> +}
> +static inline void reg_write(u32 addr, u32 val)
> +{
> +	*(volatile u16*)addr = (u16)val;
> +	*(volatile u16*)(addr + 2) = (u16)(val >> 16);
> +}
>  #else
> -#error "SMC911X: Only 32-bit bus is supported"
> -#endif
> +#error "SMC911X: undefined bus width"
> +#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
>  
>  #define mdelay(n)       udelay((n)*1000)
>  
>
>   
Applied to net repo.

thanks,
Ben