From: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [MIPS] Rename Alchemy processor configs into CONFIGO_SOC_*
Date: Sat, 24 May 2008 22:43:54 +0900 [thread overview]
Message-ID: <48381B9A.7010905@ruby.dti.ne.jp> (raw)
CONFIG_SOC_AU1X00
Common Alchemy Au1x00 stuff. All Alchemy processor based machines
need to have this config as a system type specifier.
CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
Machine type specifiers. Each port should have one of aboves.
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
---
cpu/mips/au1x00_eth.c | 12 ++++++------
cpu/mips/au1x00_serial.c | 4 ++--
cpu/mips/au1x00_usb_ohci.c | 2 +-
include/asm-mips/addrspace.h | 6 +++---
include/asm-mips/au1x00.h | 6 +++---
include/configs/dbau1x00.h | 10 +++++-----
include/configs/gth2.h | 4 ++--
include/configs/pb1x00.h | 8 ++++----
8 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index d70c5fe..aeb9662 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -23,7 +23,7 @@
*/
#include <config.h>
-#ifdef CONFIG_AU1X00
+#ifdef CONFIG_SOC_AU1X00
#if defined(CFG_DISCOVER_PHY)
#error "PHY not supported yet"
@@ -33,20 +33,20 @@
/* I assume ethernet behaves like au1000 */
-#ifdef CONFIG_AU1000
+#ifdef CONFIG_SOC_AU1000
/* Base address differ between cpu:s */
#define ETH0_BASE AU1000_ETH0_BASE
#define MAC0_ENABLE AU1000_MAC0_ENABLE
#else
-#ifdef CONFIG_AU1100
+#ifdef CONFIG_SOC_AU1100
#define ETH0_BASE AU1100_ETH0_BASE
#define MAC0_ENABLE AU1100_MAC0_ENABLE
#else
-#ifdef CONFIG_AU1500
+#ifdef CONFIG_SOC_AU1500
#define ETH0_BASE AU1500_ETH0_BASE
#define MAC0_ENABLE AU1500_MAC0_ENABLE
#else
-#ifdef CONFIG_AU1550
+#ifdef CONFIG_SOC_AU1550
#define ETH0_BASE AU1550_ETH0_BASE
#define MAC0_ENABLE AU1550_MAC0_ENABLE
#else
@@ -308,4 +308,4 @@ int au1x00_enet_initialize(bd_t *bis){
return 1;
}
-#endif /* CONFIG_AU1X00 */
+#endif /* CONFIG_SOC_AU1X00 */
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
index 42c668e..ec10ac0 100644
--- a/cpu/mips/au1x00_serial.c
+++ b/cpu/mips/au1x00_serial.c
@@ -27,7 +27,7 @@
#include <config.h>
-#ifdef CONFIG_AU1X00
+#ifdef CONFIG_SOC_AU1X00
#include <common.h>
#include <asm/au1x00.h>
@@ -132,4 +132,4 @@ int serial_tstc (void)
}
return 0;
}
-#endif /* CONFIG_SERIAL_AU1X00 */
+#endif /* CONFIG_SOC_AU1X00 */
diff --git a/cpu/mips/au1x00_usb_ohci.c b/cpu/mips/au1x00_usb_ohci.c
index dbf72dc..e03b125 100644
--- a/cpu/mips/au1x00_usb_ohci.c
+++ b/cpu/mips/au1x00_usb_ohci.c
@@ -35,7 +35,7 @@
#include <config.h>
-#if defined(CONFIG_AU1X00) && defined(CONFIG_USB_OHCI)
+#if defined(CONFIG_SOC_AU1X00) && defined(CONFIG_USB_OHCI)
/* #include <pci.h> no PCI on the AU1x00 */
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 767804c..3a1e6d6 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -131,13 +131,13 @@
* Returns the uncached address of a sdram address
*/
#ifndef __ASSEMBLY__
-#if defined(CONFIG_AU1X00) || defined(CONFIG_TB0229)
+#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229)
/* We use a 36 bit physical address map here and
cannot access physical memory directly from core */
#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
-#else /* !CONFIG_AU1X00 */
+#else /* !CONFIG_SOC_AU1X00 */
#define UNCACHED_SDRAM(a) KSEG1ADDR(a)
-#endif /* CONFIG_AU1X00 */
+#endif /* CONFIG_SOC_AU1X00 */
#endif /* __ASSEMBLY__ */
/*
diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h
index 6a33197..2a948e8 100644
--- a/include/asm-mips/au1x00.h
+++ b/include/asm-mips/au1x00.h
@@ -137,7 +137,7 @@ static __inline__ int au_ffs(int x)
#define CP0_DEBUG $23
/* SDRAM Controller */
-#ifdef CONFIG_AU1550
+#ifdef CONFIG_SOC_AU1550
#define MEM_SDMODE0 0xB4000800
#define MEM_SDMODE1 0xB4000808
@@ -156,7 +156,7 @@ static __inline__ int au_ffs(int x)
#define MEM_SDWRMD1 0xB4000888
#define MEM_SDWRMD2 0xB4000890
-#else /* CONFIG_AU1550 */
+#else /* CONFIG_SOC_AU1550 */
#define MEM_SDMODE0 0xB4000000
#define MEM_SDMODE1 0xB4000004
@@ -174,7 +174,7 @@ static __inline__ int au_ffs(int x)
#define MEM_SDWRMD1 0xB4000028
#define MEM_SDWRMD2 0xB400002C
-#endif /* CONFIG_AU1550 */
+#endif /* CONFIG_SOC_AU1550 */
#define MEM_SDSLEEP 0xB4000030
#define MEM_SDSMCKE 0xB4000034
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index ddb98ac..d039e7a 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -30,21 +30,21 @@
#define CONFIG_CPU_MIPS32_R1 1 /* MIPS32 CPU core */
#define CONFIG_DBAU1X00 1
-#define CONFIG_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
-#define CONFIG_AU1000 1
+#define CONFIG_SOC_AU1000 1
#else
#ifdef CONFIG_DBAU1100
-#define CONFIG_AU1100 1
+#define CONFIG_SOC_AU1100 1
#else
#ifdef CONFIG_DBAU1500
-#define CONFIG_AU1500 1
+#define CONFIG_SOC_AU1500 1
#else
#ifdef CONFIG_DBAU1550
/* Cabernet */
-#define CONFIG_AU1550 1
+#define CONFIG_SOC_AU1550 1
#else
#error "No valid board set"
#endif
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index 50487fa..a0e8481 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -30,9 +30,9 @@
#define CONFIG_CPU_MIPS32_R1 1 /* MIPS32 CPU core */
#define CONFIG_GTH2 1
-#define CONFIG_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
-#define CONFIG_AU1000 1
+#define CONFIG_SOC_AU1000 1
#define CONFIG_MISC_INIT_R 1
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index 899959a..842ec6a 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -30,16 +30,16 @@
#define CONFIG_CPU_MIPS32_R1 1 /* MIPS32 CPU core */
#define CONFIG_PB1X00 1
-#define CONFIG_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
#ifdef CONFIG_PB1000
-#define CONFIG_AU1000 1
+#define CONFIG_SOC_AU1000 1
#else
#ifdef CONFIG_PB1100
-#define CONFIG_AU1100 1
+#define CONFIG_SOC_AU1100 1
#else
#ifdef CONFIG_PB1500
-#define CONFIG_AU1500 1
+#define CONFIG_SOC_AU1500 1
#else
#error "No valid board set"
#endif
reply other threads:[~2008-05-24 13:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48381B9A.7010905@ruby.dti.ne.jp \
--to=skuribay@ruby.dti.ne.jp \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox