From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 03 Jun 2008 18:43:18 +0200 Subject: [U-Boot-Users] [patch 0/6] DM9000: Several fixes/cleanups for the DM9000A controller In-Reply-To: <48455D9F.2080501@gmail.com> References: <20080603132620.482930912@bohmer.net>> <48455D9F.2080501@gmail.com> Message-ID: <484574A6.7070107@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Ben Warren wrote: > Wolfgang, > > Is the merge window open for the rest of today, or is it closed? If > open, I'll look at this patch set later today and act on it. Otherwise > this goes into the 'for later' bin. > Hi, this patch does not work on the trizeps board. I get the following error: $ tftp 0xa0010000 u-boot.bin dm9000 i/o: 0x8000000, id: 0x90000a46 DM9000: running in 32 bit mode MAC: 00:50:c2:3b:8f:0a operating at 100M full duplex mode TFTP from server 192.168.2.14; our IP address is 192.168.2.77 Filename 'u-boot.bin'. Load address: 0xa0010000 Loading: DM9000 error: status check fail: 0x6d I have only applied the patches and tried a quick check...The bus width is correctly recognized but there is no data transfer. However, the ethernet controller works with the current driver: $ tftp 0xa0010000 u-boot.bin dm9000 i/o: 0x8000000, id: 0x90000a46 MAC: 00:50:c2:3b:8f:0a operating at 100M full duplex mode TFTP from server 192.168.2.14; our IP address is 192.168.2.77 Filename 'u-boot.bin'. Load address: 0xa0010000 Loading: ########### done Bytes transferred = 160180 (271b4 hex) Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================