[U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12

llandre
2008-06-06T07:22:43Z

> What repository are you working from?
U-Boot 1.3.1 cloned last February.

> What ML403 patch are you referencing?
http://www.dave.eu/download/misc/mmfx12/ml403.patch
This derives directly from this old patch that has been around since 2005:
http://www.dave.eu/download/misc/mmfx12/4-ml403.2005-10-01.patch
This patch has been applied by my colleague. Then I put my hands on
repository and started working on MiniModule port.

> I'm working on a ML403 board at the moment and would be willing to help
> debug / share fixes for u-boot.
Thanks for your availability.

> I have just started looking at a u-boot port but have been working lots
> with the 2.6 kernel (using the ACE support).
We did the same. First we worked on the ML403, then we ported our
project to MiniModule that will be the base for the final application.

--
llandre

DAVE Electronics System House - R&D Department
web: http://www.dave.eu
email: r&d2 at dave-tech.it

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of llandre
> Sent: Thursday, June 05, 2008 12:15 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: [U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12
>
> Hi all,
>
> I ported U-Boot 1.3.1 on Avnet MiniModule-FX12 (the repository I'm
> working with has been patched previously with ML403 patch). Here is my
> first dirty patch:
>
> http://www.dave.eu/download/misc/mmfx12/mmfx12-0.8.3.patch
>
> U-Boot works fine and it boots correctly from flash, however ethernet
> interface (LL_TEMAC) does not work.
> For example, when I try to perform a TFTP download, the XEmac_PollSend
> function never returns because the following loop never ends:
>
> /*
> * Loop on the MAC's status to wait for the transmit to complete. The
> * transmit status is in the FIFO when the XMIT_DONE bit is set.
> */
> do {
> IntrStatus = XIIF_V123B_READ_IISR(InstancePtr->BaseAddress);
> }
> while ((IntrStatus & XEM_EIR_XMIT_DONE_MASK) == 0);
>
> Please note that the FPGA bitstream is ok because the linux kernel works
> fine and can mount root file system via NFS so I pretty sure something
> is wrong in my U-Boot port.
>
> Anybody experienced similar problems?
>
>
> TIA,
> llandre
>
> DAVE Electronics System House - R&D Department
> web: http://www.dave.eu
> email: r&d2 at dave-tech.it
>
> ------------------------------------------------------------------------
> -
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for just about anything Open
> Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
>