From: llandre <r&d2@dave-tech.it>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] MX31ADS: I2C1 bus
Date: Fri, 06 Jun 2008 10:46:16 +0200 [thread overview]
Message-ID: <4848F958.2060809@dave-tech.it> (raw)
Hi Sascha,
I downloaded current u-boot repo to perform a simple test on MX31ADS: I
just have to verify that an I2C component connected to JP13 is detected
by U-Boot (iprobe).
So I enabled the I2C support in MX31ADS config file:
/* I2C */
#define CONFIG_HARD_I2C 1
#define CONFIG_I2C_MXC 1
#define CFG_I2C_MX31_PORT1 1
#define CFG_I2C_SPEED 100000
#define CFG_I2C_SLAVE 0xfe
U-Boot builds and boots fine however, when issuing iprobe command, SDA
and SCL lines are stuck at ~2.1V. JP6 and JP7 are both in 2-3 position.
Am I missing something?
TIA,
llandre
DAVE Electronics System House - R&D Department
web: http://www.dave.eu
email: r&d2 at dave-tech.it
next reply other threads:[~2008-06-06 8:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-06 8:46 llandre [this message]
2008-06-09 20:14 ` [U-Boot-Users] MX31ADS: I2C1 bus Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4848F958.2060809@dave-tech.it \
--to=r&d2@dave-tech.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox