From: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 5/10] net: Conditional COBJS inclusion of National Semiconductor modules
Date: Sun, 08 Jun 2008 01:08:46 +0900 [thread overview]
Message-ID: <484AB28E.3040009@ruby.dti.ne.jp> (raw)
In-Reply-To: <484AB1AA.4060609@ruby.dti.ne.jp>
net: Conditional COBJS inclusion of National Semiconductor modules
From: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
---
drivers/net/Makefile | 4 ++--
drivers/net/natsemi.c | 5 -----
drivers/net/ns8382x.c | 5 -----
3 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 35c1490..57c31cb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -41,7 +41,7 @@ COBJS-y += ks8695eth.o
COBJS-y += lan91c96.o
COBJS-y += macb.o
COBJS-y += mcffec.o
-COBJS-y += natsemi.o
+COBJS-$(CONFIG_NATSEMI) += natsemi.o
ifeq ($(CONFIG_DRIVER_NE2000),y)
COBJS-y += ne2000.o
COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
@@ -49,7 +49,7 @@ endif
COBJS-y += netarm_eth.o
COBJS-y += netconsole.o
COBJS-y += ns7520_eth.o
-COBJS-y += ns8382x.o
+COBJS-$(CONFIG_NS8382X) += ns8382x.o
COBJS-y += ns9750_eth.o
COBJS-y += pcnet.o
COBJS-y += plb2800_eth.o
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index a523959..4aee048 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -56,9 +56,6 @@
#include <asm/io.h>
#include <pci.h>
-#if defined(CONFIG_CMD_NET) \
- && defined(CONFIG_NET_MULTI) && defined(CONFIG_NATSEMI)
-
/* defines */
#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
@@ -878,5 +875,3 @@ natsemi_disable(struct eth_device *dev)
/* Restore PME enable bit */
OUTL(dev, SavedClkRun, ClkRun);
}
-
-#endif
diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c
index c807dd4..0b9a3ae 100644
--- a/drivers/net/ns8382x.c
+++ b/drivers/net/ns8382x.c
@@ -56,9 +56,6 @@
#include <asm/io.h>
#include <pci.h>
-#if defined(CONFIG_CMD_NET) \
- && defined(CONFIG_NET_MULTI) && defined(CONFIG_NS8382X)
-
/* defines */
#define DSIZE 0x00000FFF
#define ETH_ALEN 6
@@ -859,5 +856,3 @@ ns8382x_disable(struct eth_device *dev)
/* Restore PME enable bit */
OUTL(dev, SavedClkRun, ClkRun);
}
-
-#endif
next prev parent reply other threads:[~2008-06-07 16:08 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-07 16:01 [U-Boot-Users] drivers/net/Makefile: Conditional COBJS inclusion cleanups Shinya Kuribayashi
2008-06-07 16:03 ` [U-Boot-Users] [PATCH 1/10] net: Conditional COBJS inclusion of bcm570x and tigon3 modules Shinya Kuribayashi
2008-06-07 16:04 ` [U-Boot-Users] [PATCH 2/10] net: Conditional COBJS inclusion of Realtek modules Shinya Kuribayashi
2008-06-07 16:06 ` [U-Boot-Users] [PATCH 3/10] net: Conditional COBJS inclusion of Intel modules Shinya Kuribayashi
2008-06-07 16:07 ` [U-Boot-Users] [PATCH 4/10] net: Conditional COBJS inclusion of INCA-IP switch Shinya Kuribayashi
2008-06-07 16:08 ` Shinya Kuribayashi [this message]
2008-06-07 16:10 ` [U-Boot-Users] [PATCH 6/10] net: Conditional COBJS inclusion of NET+ARM modules Shinya Kuribayashi
2008-06-07 16:11 ` [U-Boot-Users] [PATCH 7/10] net: Conditional COBJS inclusion of TSEC and Vitesse modules Shinya Kuribayashi
2008-06-07 16:12 ` [U-Boot-Users] [PATCH 8/10] net: Conditional COBJS inclusion of SMC modules Shinya Kuribayashi
2008-06-07 16:14 ` [U-Boot-Users] [PATCH 9/10] net: Conditional COBJS inclusion of Freescale FEC modules Shinya Kuribayashi
2008-06-07 16:16 ` [U-Boot-Users] [PATCH 10/10] net: Conditional COBJS inclusino of remainings Shinya Kuribayashi
2008-06-09 13:19 ` Ben Warren
2008-06-09 13:43 ` Shinya Kuribayashi
2008-06-09 14:37 ` [U-Boot-Users] [PATCH v2] net: Conditional COBJS inclusion of network drivers Shinya Kuribayashi
2008-07-05 22:32 ` Wolfgang Denk
2008-07-06 4:42 ` Shinya Kuribayashi
2008-07-06 10:56 ` Jean-Christophe PLAGNIOL-VILLARD
2008-07-07 1:20 ` Shinya Kuribayashi
2008-07-06 7:01 ` Ben Warren
2008-07-06 7:52 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=484AB28E.3040009@ruby.dti.ne.jp \
--to=skuribay@ruby.dti.ne.jp \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox