From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Mon, 09 Jun 2008 13:25:55 +0900
Subject: [U-Boot-Users] Question on SH7763
In-Reply-To: <48482A91.5060102@invitel.hu>
References: <29ab51dc0806050432i51cb4a38tcedca20496d61131@mail.gmail.com>
	<736633718.11211212672409879.JavaMail.root@mbv7.indiatimes.com>
	<20080606003512.501d3025.iwamatsu@nigauri.org>
	<48482A91.5060102@invitel.hu>
Message-ID: <484CB0D3.6070205@renesas.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello, Heiko.

Thank you for your comments.
> 
> CC ed the u-boot mailinglist, because its more a u-boot topic. I used to
> compile the u-boot
> for a sh7750R based board (Sorry, patches for u-boot not posted yet ...)
> with the
> compiler from
> 
> http://www.sh-linux.org
> 
> There is also a fine readme.txt for installation.
> 
> or use crosstools for making a compiler for your needs. See it at:
> 
> http://www.kegel.com/crosstool/
> 
> And then, hack the code ;-)
> If your Flash supports CFI it should work with the CFI driver in u-boot.
> Look in the u-boot readme how to start/modify the u-boot code.

And I wrote a document a little.
Please check doc/README.sh

Best regards,
  Nobuhiro