[U-Boot-Users] Please pull u-boot-mpc85xx.git (v2)

[Wolfgang Grandegger <wg@grandegger.com>]

Wolfgang Denk wrote:
> In message <1213170182-23158-1-git-send-email-afleming@freescale.com> you wrote:
>> are available in the git repository at:
>>
>>   git://www.denx.de/git/u-boot-mpc85xx.git master
>>
>>   A re-send, since I accidentally undid a bunch of changes before I sent the
>>   last pull request.  This one has been build-tested.
>>
>> Andy Fleming (1):
>>       socrates: Fix PCI clk fix patch
>>
>> Anton Vorontsov (2):
>>       83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
>>       83xx/85xx: further localbus cleanups
>>
>> Becky Bruce (1):
>>       MPC85xx: Change traps.c to not reference non-addressable memory
>>
>> Kumar Gala (9):
>>       85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
>>       85xx: expose cpu identification
>>       85xx: Add setting of cache props in the device tree.
>>       85xx: Remove unused and unconfigured memory test code.
>>       MPC8544DS: Update config.h
>>       85xx: remove dummy board_early_init_f
>>       FSL LAW: Keep track of LAW allocations
>>       85xx/86xx: Move to dynamic mgmt of LAWs
>>       FSL LAW: Add new interface to use the last free LAW
>>
>> Sergei Poselenov (7):
>>       Socrates: config file cleanup.
>>       Added the upmconfig() function for 85xx.
>>       Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
>>       Socrates: added missed file with UPMA configuration data.
>>       NAND: Added support for 128-bit OOB, adapted
>>       Socrates: NAND support added. Changed the U-Boot base address and
>>       Socrates: Added FPGA base address update in FDT.
>>
>> Wolfgang Grandegger (16):
>>       83xx/85xx/86xx: add more MxMR local bus definitions
>>       TQM: move TQM boards to board/tqc
>>       PPC: add accessor macros to clear and set bits in one shot
>>       MPC85xx: Beautify boot output of L2 cache configuration
>>       NAND FSL UPM: driver re-write using the hwcontrol callback

I just realized that the related patch for the MPC8360ERDK got lost:

http://www.mail-archive.com/u-boot-users at lists.sourceforge.net/msg06991.html

It is required to get that board working with the re-written FSL UPM
driver. Could someone pick it up, please.

Thanks,

Wolfgang.