From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/4] imx: Align the imximage header and payload to multiples of 4k
Date: Mon, 25 Feb 2013 20:13:38 +0100 (CET) [thread overview]
Message-ID: <485665541.106371.1361819618703.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1361816397-8661-2-git-send-email-marex@denx.de>
On Monday, February 25, 2013 7:19:55 PM, Marek Vasut wrote:
> The MX53 ROM loads the data from NAND in multiples of pages and
> supports maximum page size of 4k. Thus, align the image and header
> to 4k to be safe from ROM bugs.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
> tools/imximage.c | 11 +++++++----
> tools/imximage.h | 3 ++-
> 2 files changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/tools/imximage.c b/tools/imximage.c
> index fa308c9..c018562 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -518,11 +518,14 @@ static void imximage_set_header(void *ptr, struct stat
> *sbuf, int ifd,
>
> /*
> * ROM bug alert
> - * mx53 only loads 512 byte multiples.
> - * The remaining fraction of a block bytes would
> - * not be loaded.
> + *
> + * MX53 only loads 512 byte multiples in case of SD boot.
> + * MX53 only loads NAND page multiples in case of NAND boot and
> + * supports up to 4096 byte large pages, thus align to 4096.
> + *
> + * The remaining fraction of a block bytes would not be loaded!
> */
> - *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 512);
> + *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 4096);
> }
>
> int imximage_check_params(struct mkimage_params *params)
> diff --git a/tools/imximage.h b/tools/imximage.h
> index 42b6090..dfd2e9e 100644
> --- a/tools/imximage.h
> +++ b/tools/imximage.h
> @@ -151,13 +151,14 @@ typedef struct {
> dcd_v2_t dcd_table;
> } imx_header_v2_t;
>
> +/* The header must be aligned to 4k on MX53 for NAND boot */
> struct imx_header {
> union {
> imx_header_v1_t hdr_v1;
> imx_header_v2_t hdr_v2;
> } header;
> uint32_t flash_offset;
> -};
> +} __attribute__((aligned(4096)));
So what is the exact rule for the image start page in the FCB? Is it just
0x400 + 4096 + start page * page size? This does not seem to match table 7-12,
unless 0 has a special meaning?
>
> typedef void (*set_dcd_val_t)(struct imx_header *imxhdr,
> char *name, int lineno,
> --
> 1.7.10.4
>
>
Best regards,
Beno?t
next prev parent reply other threads:[~2013-02-25 19:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-25 18:19 [U-Boot] [PATCH 1/4] common: imx: Implement generic u-boot.nand target Marek Vasut
2013-02-25 18:19 ` [U-Boot] [PATCH 2/4] imx: Align the imximage header and payload to multiples of 4k Marek Vasut
2013-02-25 19:13 ` Benoît Thébaudeau [this message]
2013-02-25 21:07 ` Marek Vasut
2013-02-25 21:16 ` Benoît Thébaudeau
2013-02-25 18:19 ` [U-Boot] [PATCH 3/4] mx5: Add NAND clock handling Marek Vasut
2013-02-25 19:27 ` Benoît Thébaudeau
2013-02-25 18:24 ` [U-Boot] [PATCH 4/4] mx5: Add support for DENX M53EVK Marek Vasut
2013-02-25 19:33 ` Benoît Thébaudeau
2013-02-26 13:52 ` Fabio Estevam
2013-02-26 19:32 ` Fabio Estevam
2013-04-14 17:20 ` Marek Vasut
2013-04-14 19:07 ` Wolfgang Denk
2013-04-14 19:18 ` Marek Vasut
2013-02-25 18:51 ` [U-Boot] [PATCH 1/4] common: imx: Implement generic u-boot.nand target Benoît Thébaudeau
2013-02-25 21:09 ` Marek Vasut
2013-02-25 21:13 ` Benoît Thébaudeau
2013-02-26 1:02 ` [U-Boot] patch error wanxs
2013-02-25 20:10 ` [U-Boot] [PATCH 1/4] common: imx: Implement generic u-boot.nand target Scott Wood
2013-02-25 21:10 ` Marek Vasut
2013-02-25 22:15 ` Scott Wood
2013-02-25 23:03 ` Marek Vasut
2013-02-25 23:07 ` Scott Wood
2013-02-25 23:50 ` Benoît Thébaudeau
2013-02-26 7:19 ` Marek Vasut
2013-02-26 11:33 ` Benoît Thébaudeau
2013-02-27 17:33 ` Tom Rini
2013-02-28 18:50 ` Marek Vasut
2013-02-28 18:53 ` Tom Rini
2013-02-26 7:17 ` Marek Vasut
2013-02-26 23:10 ` Scott Wood
2013-02-27 22:18 ` Benoît Thébaudeau
2013-02-27 23:44 ` Tom Rini
2013-02-27 23:47 ` Benoît Thébaudeau
2013-02-28 12:18 ` Benoît Thébaudeau
2013-02-28 14:03 ` Tom Rini
2013-02-28 15:24 ` Benoît Thébaudeau
2013-02-28 16:06 ` Benoît Thébaudeau
2013-02-28 16:21 ` Tom Rini
2013-02-28 16:29 ` Benoît Thébaudeau
2013-02-28 16:42 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=485665541.106371.1361819618703.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox