From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sachin Rane, Alphion Communications <srane@alphion.com>
Date: Mon, 16 Jun 2008 21:18:34 +0530
Subject: [U-Boot-Users] Value of CFG_PCI_MEMBASE
In-Reply-To: <200806160943.07250.sr@denx.de>
References: <73FA539107892C4C8C7A5ACA10C161C803A81A@MX2.AlphionCorp.local>
	<200806121151.37838.sr@denx.de>
	<73FA539107892C4C8C7A5ACA10C161C803A81E@MX2.AlphionCorp.local>
	<200806160943.07250.sr@denx.de>
Message-ID: <48568B52.6010201@alphion.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Stefan,

I don't have much knowledge about how u-boot being implemented.

>Why is this? Which "Board Memory Map" are you referring to?

I am referring to 'Peripheral Registers' table given in 'PPC440GX? 
Evaluation Board User?s Manual'.
I found the 32 bit value passed to the 'telbentry' macro is matching 
with the values given in the '32 Bit Address' column of the table except 
for 'PCI Memory - cached'.
And this mismatch confused me.

 From your last reply I understood that it is the developer who got the 
freedom to decide the 32-bit value.
Is that correct?

Regards,
Sachin






Stefan Roese wrote:
> On Monday 16 June 2008, Sachin Rane wrote:
>   
>> Infact I was looking for the info to create a proper 'tlbentry' in 'init.S'
>> As per my understanding the 'tlbentry' is to map 32-bit address to 36-bit
>> address.
>>
>> The 'tlbenry' for the PCI Memory in 'init.S' is :
>> tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
>>
>> The 'CFG_PCI_MEMBASE' is set to 0x80000000 in 'ocotea.h'.
>>
>> My question is how to select the value for 'CFG_PCI_MEMBASE'.
>> Can I use any value (say 0x50000000 ) provided it is not overlapping with
>> other devices?
>>     
>
> Yes. I suggest to start with 0x80000000 since this leaves the first 2 GB for 
> SDRAM.
>
>   
>> If we are using Board Memory Map as a reference then the 32-bit address
>> 'CFG_PCI_MEMBASE'  used in 'telbentry' should have set to: 0x90000000
>>     
>
> Why is this? Which "Board Memory Map" are you referring to?
>
>   
>> I am trying to find out the logic behind the selection of value for the
>> variabale 'CFG_PCI_MEMBASE' in: tlbentry( CFG_PCI_MEMBASE, SZ_256M,
>> 0x00000000, 3, AC_R|AC_W|SA_G|SA_I )
>>     
>
> Whats the problems with using 0x80000000 here?
>
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
>
>
>