From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Schwarz Date: Wed, 02 Jul 2008 16:36:11 +0200 Subject: [U-Boot-Users] TSEC/PHY @ MPC834x stopped working In-Reply-To: References: <486B8ABD.5020001@matrix-vision.de> Message-ID: <486B925B.4040508@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Ben, thanks for your quick reply. Looks like you're right - nothing changed regarding network yet. Maybe it's a cpu specific problem. Kim ? Can you help here ? regards, Andre Ben Warren schrieb: > Hi Andre, > > On Wed, Jul 2, 2008 at 7:03 AM, Andre Schwarz > wrote: > >> Ben, >> >> after pulling u-boot today ethernet stopped working on my MPC8343 based >> board (mvBL-M7). >> I'm using a Vitesse VSC8601 RGMII phy on TSEC0-1. >> >> I know there's some rewriting/clean-up going on ... >> >> > Yeah, but none of that's in the main source tree. > > >> What do I have to do to get it working again ? >> Any new defines introduced lately ? >> >> Obviously the MII interface stopped working, i.e. all reads give 0xFF. >> Switching back to older U-boot (3-4 weeks ago) works fine. >> > > Looking here: > http://git.denx.de/?p=u-boot.git;a=history;f=drivers/net/tsec.c;h=6e0f2c6fd081baa19d80a985717d470a1f78bc2d;hb=HEAD > > nothing new has been added except support for a new PHY, and that was > about 5 weeks ago. > >> Any help is welcome. >> >> > Sorry, I don't have access to my MPC8349 board right now or I'd try to > help more usefully. Maybe you can post some more information. > > >> regards, >> Andre >> >> MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 >> Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner >> >> > regards, > Ben > MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner