From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Schwarz Date: Wed, 02 Jul 2008 18:45:26 +0200 Subject: [U-Boot-Users] TSEC/PHY @ MPC834x stopped working In-Reply-To: <20080702113228.cbc323d3.kim.phillips@freescale.com> References: <486B8ABD.5020001@matrix-vision.de> <486B925B.4040508@matrix-vision.de> <20080702103152.365f63fe.kim.phillips@freescale.com> <486BA63D.9050906@matrix-vision.de> <20080702113228.cbc323d3.kim.phillips@freescale.com> Message-ID: <486BB0A6.6070102@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Kim Phillips schrieb: > On Wed, 02 Jul 2008 18:01:01 +0200 > Andre Schwarz wrote: > > >> this is a fully configured board, i.e. serial# and ethaddr/eth1addr set >> up correctly. >> >> I'll give the bisect a try a soon as there'll be some time. >> >> > just to clarify, are you using the mainline u-boot.git tree, or > u-boot-mpc83xx.git? you should be using the latter until I ask WD to > pull. Actually, if you can confirm it corrects your problem, I have no > reason to delay it further (I was waiting for WD to get back from > vacation). > > Kim > Kim, I'm running from mainline. Do you want me to give u-boot-mpc83xx.git a try ? After all I think the problem is lurking on my hardware/network somewhere. I need some more time ... regards, Andre MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner