From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Schwarz Date: Thu, 03 Jul 2008 17:40:06 +0200 Subject: [U-Boot-Users] e1000 problem @ current u-boot In-Reply-To: <486CF042.4020409@grandegger.com> References: <486CD365.2030104@matrix-vision.de> <486CF042.4020409@grandegger.com> Message-ID: <486CF2D6.3090805@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang, of course I meant no offense - of course your patch is harmless. The System (network camera) is running for nearly 2 years now. Last working version has been u-boot 1.2.x with a 2.6.19 kernel. Since we've moved to the latest kernel we need a more recent u-boot. This is what I did - and e1000 no longer works. Of course I diff'ed the network stuff - no obvious changes at all. So I wonder if the problem is elsewhere and if e1000 is still working in general. As you say this is obviously true - thanks. regards, Andre Wolfgang Grandegger schrieb: > Andre Schwarz wrote: >> Wolfgang, >> >> as far as I can see on the list you sent the latest patches for the >> e1000 driver. > > My patches just added some device ids, > > >> My e1000 (82541ER) stopped working on a MPC5200 based board with latest >> u-boot. >> I have a similar problem on another board ... >> >> Is your e1000 working properly on the latest u-boot ? > > Yes, on a MPC8548 board. I have not tested it on the MPC5200. > >> Do I need any additional defines or environment settings to get it >> working again ? >> >> Obviously it is - again :-[ - my fault or is related to my build system. > > I think there are some known problems with PCI on boards with a > MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. > What exactly does not work? > > Wolfgang. MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner