From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-15?Q?Andr=E9_Schwarz?= Date: Thu, 03 Jul 2008 23:03:44 +0200 Subject: [U-Boot-Users] e1000 problem @ current u-boot In-Reply-To: <486D047B.5020904@grandegger.com> References: <486CD365.2030104@matrix-vision.de> <486CF042.4020409@grandegger.com> <486CF2D6.3090805@matrix-vision.de> <486D047B.5020904@grandegger.com> Message-ID: <486D3EB0.9010806@matrix-vision.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Today I've stressed my diff a quite a bit and tried several config options from other boards that I did _not_ have ... After adding the config option for skipping the pci host bridge it worked again. Unfortunately I have no clue why since this can hardly cause that ... maybe I'll dig a little deeper. cheers, Andr? Wolfgang Grandegger wrote: > Andre Schwarz wrote: >> Wolfgang, >> >> of course I meant no offense - of course your patch is harmless. > > No problem. > >> The System (network camera) is running for nearly 2 years now. >> Last working version has been u-boot 1.2.x with a 2.6.19 kernel. >> >> Since we've moved to the latest kernel we need a more recent u-boot. >> >> This is what I did - and e1000 no longer works. >> >> Of course I diff'ed the network stuff - no obvious changes at all. >> So I wonder if the problem is elsewhere and if e1000 is still working in >> general. > > Have you read my previous mail? See below. > >> Wolfgang Grandegger schrieb: >>> Andre Schwarz wrote: >>>> Wolfgang, >>>> >>>> as far as I can see on the list you sent the latest patches for the >>>> e1000 driver. >>> My patches just added some device ids, >>> >>> >>>> My e1000 (82541ER) stopped working on a MPC5200 based board with >>>> latest >>>> u-boot. >>>> I have a similar problem on another board ... >>>> >>>> Is your e1000 working properly on the latest u-boot ? >>> Yes, on a MPC8548 board. I have not tested it on the MPC5200. >>> >>>> Do I need any additional defines or environment settings to get it >>>> working again ? >>>> >>>> Obviously it is - again :-[ - my fault or is related to my build >>>> system. >>> I think there are some known problems with PCI on boards with a >>> MPC5200 Rev. A processor, e.g. my EEPRO100 card does not work on it. >>> What exactly does not work? > > More information could be useful. > > Wolfgang. > MATRIX VISION GmbH, Talstra?e 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch?ftsf?hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner