public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] rtl8169: add support for RTL8110SCL
Date: Wed, 09 Jul 2008 21:07:34 +0900	[thread overview]
Message-ID: <4874AA06.4020003@renesas.com> (raw)

This patch fixes a problem that RTL8110SCL started transfer
with an incorrect memory address.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
---
 drivers/net/rtl8169.c |   28 ++++++++++++++++++++++------
 1 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 7423bc0..b57219e 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -112,8 +112,10 @@ static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
 enum RTL8169_registers {
 	MAC0 = 0,		/* Ethernet hardware address. */
 	MAR0 = 8,		/* Multicast filter. */
-	TxDescStartAddr = 0x20,
-	TxHDescStartAddr = 0x28,
+	TxDescStartAddrLow = 0x20,
+	TxDescStartAddrHigh = 0x24,
+	TxHDescStartAddrLow = 0x28,
+	TxHDescStartAddrHigh = 0x2c,
 	FLASH = 0x30,
 	ERSR = 0x36,
 	ChipCmd = 0x37,
@@ -138,7 +140,8 @@ enum RTL8169_registers {
 	PHYstatus = 0x6C,
 	RxMaxSize = 0xDA,
 	CPlusCmd = 0xE0,
-	RxDescStartAddr = 0xE4,
+	RxDescStartAddrLow = 0xE4,
+	RxDescStartAddrHigh = 0xE8,
 	EarlyTxThres = 0xEC,
 	FuncEvent = 0xF0,
 	FuncEventMask = 0xF4,
@@ -478,6 +481,7 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length)
 	while (len < ETH_ZLEN)
 		ptxb[len++] = '\0';

+ 	tpc->TxDescArray[entry].buf_Haddr = 0;
 	tpc->TxDescArray[entry].buf_addr = cpu_to_le32((unsigned long)ptxb);
 	if (entry != (NUM_TX_DESC - 1)) {
 		tpc->TxDescArray[entry].status =
@@ -558,7 +562,11 @@ static void rtl8169_hw_start(struct eth_device *dev)
 #endif

 	RTL_W8(Cfg9346, Cfg9346_Unlock);
-	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+	/* RTL-8169sb/8110sb or previous version */
+	if (tpc->chipset <= 5)
+		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
 	RTL_W8(EarlyTxThres, EarlyTxThld);

 	/* For gigabit rtl8169 */
@@ -576,8 +584,15 @@ static void rtl8169_hw_start(struct eth_device *dev)

 	tpc->cur_rx = 0;

-	RTL_W32(TxDescStartAddr, (unsigned long)tpc->TxDescArray);
-	RTL_W32(RxDescStartAddr, (unsigned long)tpc->RxDescArray);
+	RTL_W32(TxDescStartAddrLow, (unsigned long)tpc->TxDescArray);
+	RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
+	RTL_W32(RxDescStartAddrLow, (unsigned long)tpc->RxDescArray);
+	RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
+
+ 	/* RTL-8169sc/8110sc or later version */
+ 	if (tpc->chipset > 5)
+ 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
 	RTL_W8(Cfg9346, Cfg9346_Lock);
 	udelay(10);

@@ -737,6 +752,7 @@ static int rtl_init(struct eth_device *dev, bd_t *bis)
 		bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i);

 #ifdef DEBUG_RTL8169
+	printf("chipset = %d\n", tpc->chipset);
 	printf("MAC Address");
 	for (i = 0; i < MAC_ADDR_LEN; i++)
 		printf(":%02x", dev->enetaddr[i]);

             reply	other threads:[~2008-07-09 12:07 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-09 12:07 Yoshihiro Shimoda [this message]
2008-08-19  6:05 ` [U-Boot] [U-Boot-Users] [PATCH] rtl8169: add support for RTL8110SCL Ben Warren
2008-08-19  7:19   ` Yoshihiro Shimoda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4874AA06.4020003@renesas.com \
    --to=shimoda.yoshihiro@renesas.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox