[U-Boot-Users] [PATCH] mpc85xx: make the MxMR register in upmconfig as a parameter

[Wolfgang Grandegger <wg@grandegger.com>]

Sebastian Siewior wrote:
> The default value for the MxMR register is not always the right one.
> This patch adds the value of MxMR register as an additional
> parameter (plus a few defines instead of hex coded values).
> 
> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
> ---
>  cpu/mpc85xx/cpu.c |   17 +++++++++++------
>  include/common.h  |    4 ++++
>  2 files changed, 15 insertions(+), 6 deletions(-)
> 
> diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
> index 2373b4a..081e804 100644
> --- a/cpu/mpc85xx/cpu.c
> +++ b/cpu/mpc85xx/cpu.c
> @@ -314,16 +314,21 @@ int dma_xfer(void *dest, uint count, void *src) {
>  	return dma_check();
>  }
>  #endif
> +
> +#define MXMR_OP_NORMAL	(0x00000000)
> +#define MXMR_OP_WRITE	(0x10000000)
> +#define MXMR_OP_READ	(0x20000000)
> +#define MXMR_OP_RUN	(0x30000000)

Please use the the corresponding definitions from 
"include/asm-ppc/fsl_lbc.h".