public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2
Date: Tue, 15 Jul 2008 09:28:40 -0400	[thread overview]
Message-ID: <487CA608.4020005@windriver.com> (raw)
In-Reply-To: <2acbd3e40807141751i39bd23a4v304dd03a65905a93@mail.gmail.com>

Andy Fleming wrote:
> On Fri, Jul 11, 2008 at 5:03 PM, Paul Gortmaker
> <paul.gortmaker@windriver.com> wrote:
>   
>> Wolfgang Denk wrote:
>>     
>>>       
>>>> + * MAC addresses directly on it.
>>>> + */
>>>> +#if 0
>>>> +#define CONFIG_ETHADDR              00:01:af:07:9b:8a
>>>> +#define CONFIG_ETH1ADDR             00:01:af:07:9b:8b
>>>>  #define CONFIG_SERVERIP             192.168.0.131
>>>>  #define CONFIG_IPADDR               192.168.0.105
>>>> -#define CONFIG_GATEWAYIP    0.0.0.0
>>>> +#define CONFIG_GATEWAYIP    192.168.0.1
>>>>  #define CONFIG_NETMASK              255.255.255.0
>>>> +#endif
>>>> +
>>>>
>>>>         
>>> I think this should be removed. There is really no good reason to add
>>> network configuration at all to  the  board  config  file  (with  the
>>> exception of the 2 or 3 boards which actually boot from real ROM).
>>>
>>>       
>> No problem.  I'll remove and resend.
>>     
>
> As a compromise between removal and keeping the useful information for
> developers who are doing early bringup on similar boards, I have
> applied this patch, and replaced the above with:
>
> /* You can compile in a MAC address and your custom net settings by using
>  * the following syntax.  Your board should be marked with the assigned
>  * MAC addresses directly on it.
>  *
>  * #define CONFIG_ETHADDR		de:ad:be:ef:00:00
>  * #define CONFIG_ETH1ADDR		fa:ke:ad:dr:es:s!
>   

That seems like a reasonable compromise to me.  Thanks for doing
this and merging the rest of the patches.

Paul.

>  * #define CONFIG_SERVERIP		<server ip>
>  * #define CONFIG_IPADDR		<board ip>
>  * #define CONFIG_GATEWAYIP		<gateway ip>
>  * #define CONFIG_NETMASK		<your netmask>
>  */
>
> Wolfgang, if you still object, I can totally remove it before you pull
> (git rebase --interactive is a wonderful thing).
>
> I also corrected some whitespace issues where comments trailed off the
> end of the line for no good reason.
>
> Thanks,
> Andy
>   

  parent reply	other threads:[~2008-07-15 13:28 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-07-11 19:33 [U-Boot-Users] [PATCH 0/6] Update sbc8560; enable fdt/powerpc support Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 1/7] sbc8560: proper definitions for TSEC Paul Gortmaker
2008-07-11 19:33   ` [U-Boot-Users] [PATCH 2/7] sbc8560: properly set cs0_bnds for 512MB Paul Gortmaker
2008-07-11 19:33     ` [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2 Paul Gortmaker
2008-07-11 19:33       ` [U-Boot-Users] [PATCH 4/7] sbc8560: add in ft_board_setup() Paul Gortmaker
2008-07-11 19:33         ` [U-Boot-Users] [PATCH 5/7] sbc8560: add default fdt values Paul Gortmaker
2008-07-11 19:33           ` [U-Boot-Users] [PATCH 6/7] sbc8560: enable CONFIG_OF_LIBFDT by default Paul Gortmaker
2008-07-15  1:09             ` Andy Fleming
2008-07-11 20:30           ` [U-Boot-Users] [PATCH 5/7] sbc8560: add default fdt values Wolfgang Denk
2008-07-11 22:02             ` Paul Gortmaker
2008-07-15  1:06               ` Andy Fleming
2008-07-15  1:07         ` [U-Boot-Users] [PATCH 4/7] sbc8560: add in ft_board_setup() Andy Fleming
2008-07-11 19:41       ` [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2 Ben Warren
2008-07-11 20:24       ` Wolfgang Denk
2008-07-11 22:03         ` Paul Gortmaker
2008-07-15  0:51           ` Andy Fleming
2008-07-15  6:25             ` Wolfgang Denk
2008-07-15 13:14               ` Ben Warren
2008-07-15 13:28             ` Paul Gortmaker [this message]
2008-07-15  1:07     ` [U-Boot-Users] [PATCH 2/7] sbc8560: properly set cs0_bnds for 512MB Andy Fleming
2008-07-15  0:34   ` [U-Boot-Users] [PATCH 1/7] sbc8560: proper definitions for TSEC Andy Fleming

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=487CA608.4020005@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox