* [U-Boot-Users] [PATCH] Move mpc5121 iopoin feature from board specific to common files.
@ 2008-07-15 10:13 Kenneth Johansson
2008-07-29 14:25 ` [U-Boot-Users] unassigned-patches/7: " u-boot at bugs.denx.de
2008-08-04 17:06 ` [U-Boot-Users] " John Rigby
0 siblings, 2 replies; 3+ messages in thread
From: Kenneth Johansson @ 2008-07-15 10:13 UTC (permalink / raw)
To: u-boot
And in the process eliminate some duplicate register defines.
Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
---
board/ads5121/Makefile | 2 +-
board/ads5121/ads5121.c | 58 ++++++++++-
board/ads5121/iopin.c | 115 ---------------------
board/ads5121/iopin.h | 222 -----------------------------------------
cpu/mpc512x/Makefile | 2 +-
cpu/mpc512x/iopin.c | 49 +++++++++
include/mpc512x.h | 251 ++++++++++++++++++++++++++++++++++++++++------
7 files changed, 323 insertions(+), 376 deletions(-)
delete mode 100644 board/ads5121/iopin.c
delete mode 100644 board/ads5121/iopin.h
create mode 100644 cpu/mpc512x/iopin.c
diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index 5b95682..470848f 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o iopin.o
+COBJS-y := $(BOARD).o
COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 8452054..ba3d7d2 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -23,14 +23,12 @@
#include <common.h>
#include <mpc512x.h>
-#include "iopin.h"
#include <asm/bitops.h>
#include <command.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
-#include "iopin.h" /* for iopin_initialize() prototype */
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
@@ -124,7 +122,7 @@ long int fixed_sdram (void)
u32 i;
/* Initialize IO Control */
- im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+ im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
/* Initialize DDR Local Window */
im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
@@ -237,6 +235,56 @@ int misc_init_r(void)
return 0;
}
+static iopin_t ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
int checkboard (void)
{
@@ -246,7 +294,9 @@ int checkboard (void)
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
- iopin_initialize();
+
+
+ iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
return 0;
}
diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c
deleted file mode 100644
index a6792a0..0000000
--- a/board/ads5121/iopin.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include "iopin.h"
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
-#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
-#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
-#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
-#define IO_PIN_DS(v) ((v)) /* slew rate */
-
-static struct iopin_t {
- int p_offset; /* offset from IOCTL_MEM_OFFSET */
- int nr_pins; /* number of pins to set this way */
- int bit_or; /* or in the value instead of overwrite */
- u_long val; /* value to write or or */
-} ioregs_init[] = {
- /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
- {
- IOCTL_SPDIF_TXCLK, 3, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* Set highest Slew on 9 PATA pins */
- {
- IOCTL_PATA_CE1, 9, 1,
- IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
- {
- IOCTL_PSC0_0, 15, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=SPDIF_TXCLK */
- {
- IOCTL_LPC_CS1, 1, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
- {
- IOCTL_I2C1_SCL, 2, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU CLK */
- {
- IOCTL_PSC6_0, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU_HSYNC */
- {
- IOCTL_PSC6_1, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
- {
- IOCTL_PSC6_4, 26, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- }
-};
-
-void iopin_initialize(void)
-{
- short i, j, n, p;
- u_long *reg;
- immap_t *im = (immap_t *)CFG_IMMR;
-
- reg = (u_long *)&(im->io_ctrl.regs[0]);
-
- if (sizeof(ioregs_init) == 0)
- return;
-
- n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
-
- for (i = 0; i < n; i++) {
- for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
- p < ioregs_init[i].nr_pins; p++, j++) {
- if (ioregs_init[i].bit_or)
- reg[j] |= ioregs_init[i].val;
- else
- reg[j] = ioregs_init[i].val;
- }
- }
- return;
-}
diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h
deleted file mode 100644
index 7ef8472..0000000
--- a/board/ads5121/iopin.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define IOCTL_MEM 0x000
-#define IOCTL_GP 0x004
-#define IOCTL_LPC_CLK 0x008
-#define IOCTL_LPC_OE 0x00C
-#define IOCTL_LPC_RWB 0x010
-#define IOCTL_LPC_ACK 0x014
-#define IOCTL_LPC_CS0 0x018
-#define IOCTL_NFC_CE0 0x01C
-#define IOCTL_LPC_CS1 0x020
-#define IOCTL_LPC_CS2 0x024
-#define IOCTL_LPC_AX03 0x028
-#define IOCTL_EMB_AX02 0x02C
-#define IOCTL_EMB_AX01 0x030
-#define IOCTL_EMB_AX00 0x034
-#define IOCTL_EMB_AD31 0x038
-#define IOCTL_EMB_AD30 0x03C
-#define IOCTL_EMB_AD29 0x040
-#define IOCTL_EMB_AD28 0x044
-#define IOCTL_EMB_AD27 0x048
-#define IOCTL_EMB_AD26 0x04C
-#define IOCTL_EMB_AD25 0x050
-#define IOCTL_EMB_AD24 0x054
-#define IOCTL_EMB_AD23 0x058
-#define IOCTL_EMB_AD22 0x05C
-#define IOCTL_EMB_AD21 0x060
-#define IOCTL_EMB_AD20 0x064
-#define IOCTL_EMB_AD19 0x068
-#define IOCTL_EMB_AD18 0x06C
-#define IOCTL_EMB_AD17 0x070
-#define IOCTL_EMB_AD16 0x074
-#define IOCTL_EMB_AD15 0x078
-#define IOCTL_EMB_AD14 0x07C
-#define IOCTL_EMB_AD13 0x080
-#define IOCTL_EMB_AD12 0x084
-#define IOCTL_EMB_AD11 0x088
-#define IOCTL_EMB_AD10 0x08C
-#define IOCTL_EMB_AD09 0x090
-#define IOCTL_EMB_AD08 0x094
-#define IOCTL_EMB_AD07 0x098
-#define IOCTL_EMB_AD06 0x09C
-#define IOCTL_EMB_AD05 0x0A0
-#define IOCTL_EMB_AD04 0x0A4
-#define IOCTL_EMB_AD03 0x0A8
-#define IOCTL_EMB_AD02 0x0AC
-#define IOCTL_EMB_AD01 0x0B0
-#define IOCTL_EMB_AD00 0x0B4
-#define IOCTL_PATA_CE1 0x0B8
-#define IOCTL_PATA_CE2 0x0BC
-#define IOCTL_PATA_ISOLATE 0x0C0
-#define IOCTL_PATA_IOR 0x0C4
-#define IOCTL_PATA_IOW 0x0C8
-#define IOCTL_PATA_IOCHRDY 0x0CC
-#define IOCTL_PATA_INTRQ 0x0D0
-#define IOCTL_PATA_DRQ 0x0D4
-#define IOCTL_PATA_DACK 0x0D8
-#define IOCTL_NFC_WP 0x0DC
-#define IOCTL_NFC_RB 0x0E0
-#define IOCTL_NFC_ALE 0x0E4
-#define IOCTL_NFC_CLE 0x0E8
-#define IOCTL_NFC_WE 0x0EC
-#define IOCTL_NFC_RE 0x0F0
-#define IOCTL_PCI_AD31 0x0F4
-#define IOCTL_PCI_AD30 0x0F8
-#define IOCTL_PCI_AD29 0x0FC
-#define IOCTL_PCI_AD28 0x100
-#define IOCTL_PCI_AD27 0x104
-#define IOCTL_PCI_AD26 0x108
-#define IOCTL_PCI_AD25 0x10C
-#define IOCTL_PCI_AD24 0x110
-#define IOCTL_PCI_AD23 0x114
-#define IOCTL_PCI_AD22 0x118
-#define IOCTL_PCI_AD21 0x11C
-#define IOCTL_PCI_AD20 0x120
-#define IOCTL_PCI_AD19 0x124
-#define IOCTL_PCI_AD18 0x128
-#define IOCTL_PCI_AD17 0x12C
-#define IOCTL_PCI_AD16 0x130
-#define IOCTL_PCI_AD15 0x134
-#define IOCTL_PCI_AD14 0x138
-#define IOCTL_PCI_AD13 0x13C
-#define IOCTL_PCI_AD12 0x140
-#define IOCTL_PCI_AD11 0x144
-#define IOCTL_PCI_AD10 0x148
-#define IOCTL_PCI_AD09 0x14C
-#define IOCTL_PCI_AD08 0x150
-#define IOCTL_PCI_AD07 0x154
-#define IOCTL_PCI_AD06 0x158
-#define IOCTL_PCI_AD05 0x15C
-#define IOCTL_PCI_AD04 0x160
-#define IOCTL_PCI_AD03 0x164
-#define IOCTL_PCI_AD02 0x168
-#define IOCTL_PCI_AD01 0x16C
-#define IOCTL_PCI_AD00 0x170
-#define IOCTL_PCI_CBE0 0x174
-#define IOCTL_PCI_CBE1 0x178
-#define IOCTL_PCI_CBE2 0x17C
-#define IOCTL_PCI_CBE3 0x180
-#define IOCTL_PCI_GNT2 0x184
-#define IOCTL_PCI_REQ2 0x188
-#define IOCTL_PCI_GNT1 0x18C
-#define IOCTL_PCI_REQ1 0x190
-#define IOCTL_PCI_GNT0 0x194
-#define IOCTL_PCI_REQ0 0x198
-#define IOCTL_PCI_INTA 0x19C
-#define IOCTL_PCI_CLK 0x1A0
-#define IOCTL_PCI_RST_OUT 0x1A4
-#define IOCTL_PCI_FRAME 0x1A8
-#define IOCTL_PCI_IDSEL 0x1AC
-#define IOCTL_PCI_DEVSEL 0x1B0
-#define IOCTL_PCI_IRDY 0x1B4
-#define IOCTL_PCI_TRDY 0x1B8
-#define IOCTL_PCI_STOP 0x1BC
-#define IOCTL_PCI_PAR 0x1C0
-#define IOCTL_PCI_PERR 0x1C4
-#define IOCTL_PCI_SERR 0x1C8
-#define IOCTL_SPDIF_TXCLK 0x1CC
-#define IOCTL_SPDIF_TX 0x1D0
-#define IOCTL_SPDIF_RX 0x1D4
-#define IOCTL_I2C0_SCL 0x1D8
-#define IOCTL_I2C0_SDA 0x1DC
-#define IOCTL_I2C1_SCL 0x1E0
-#define IOCTL_I2C1_SDA 0x1E4
-#define IOCTL_I2C2_SCL 0x1E8
-#define IOCTL_I2C2_SDA 0x1EC
-#define IOCTL_IRQ0 0x1F0
-#define IOCTL_IRQ1 0x1F4
-#define IOCTL_CAN1_TX 0x1F8
-#define IOCTL_CAN2_TX 0x1FC
-#define IOCTL_J1850_TX 0x200
-#define IOCTL_J1850_RX 0x204
-#define IOCTL_PSC_MCLK_IN 0x208
-#define IOCTL_PSC0_0 0x20C
-#define IOCTL_PSC0_1 0x210
-#define IOCTL_PSC0_2 0x214
-#define IOCTL_PSC0_3 0x218
-#define IOCTL_PSC0_4 0x21C
-#define IOCTL_PSC1_0 0x220
-#define IOCTL_PSC1_1 0x224
-#define IOCTL_PSC1_2 0x228
-#define IOCTL_PSC1_3 0x22C
-#define IOCTL_PSC1_4 0x230
-#define IOCTL_PSC2_0 0x234
-#define IOCTL_PSC2_1 0x238
-#define IOCTL_PSC2_2 0x23C
-#define IOCTL_PSC2_3 0x240
-#define IOCTL_PSC2_4 0x244
-#define IOCTL_PSC3_0 0x248
-#define IOCTL_PSC3_1 0x24C
-#define IOCTL_PSC3_2 0x250
-#define IOCTL_PSC3_3 0x254
-#define IOCTL_PSC3_4 0x258
-#define IOCTL_PSC4_0 0x25C
-#define IOCTL_PSC4_1 0x260
-#define IOCTL_PSC4_2 0x264
-#define IOCTL_PSC4_3 0x268
-#define IOCTL_PSC4_4 0x26C
-#define IOCTL_PSC5_0 0x270
-#define IOCTL_PSC5_1 0x274
-#define IOCTL_PSC5_2 0x278
-#define IOCTL_PSC5_3 0x27C
-#define IOCTL_PSC5_4 0x280
-#define IOCTL_PSC6_0 0x284
-#define IOCTL_PSC6_1 0x288
-#define IOCTL_PSC6_2 0x28C
-#define IOCTL_PSC6_3 0x290
-#define IOCTL_PSC6_4 0x294
-#define IOCTL_PSC7_0 0x298
-#define IOCTL_PSC7_1 0x29C
-#define IOCTL_PSC7_2 0x2A0
-#define IOCTL_PSC7_3 0x2A4
-#define IOCTL_PSC7_4 0x2A8
-#define IOCTL_PSC8_0 0x2AC
-#define IOCTL_PSC8_1 0x2B0
-#define IOCTL_PSC8_2 0x2B4
-#define IOCTL_PSC8_3 0x2B8
-#define IOCTL_PSC8_4 0x2BC
-#define IOCTL_PSC9_0 0x2C0
-#define IOCTL_PSC9_1 0x2C4
-#define IOCTL_PSC9_2 0x2C8
-#define IOCTL_PSC9_3 0x2CC
-#define IOCTL_PSC9_4 0x2D0
-#define IOCTL_PSC10_0 0x2D4
-#define IOCTL_PSC10_1 0x2D8
-#define IOCTL_PSC10_2 0x2DC
-#define IOCTL_PSC10_3 0x2E0
-#define IOCTL_PSC10_4 0x2E4
-#define IOCTL_PSC11_0 0x2E8
-#define IOCTL_PSC11_1 0x2EC
-#define IOCTL_PSC11_2 0x2F0
-#define IOCTL_PSC11_3 0x2F4
-#define IOCTL_PSC11_4 0x2F8
-#define IOCTL_HRESET 0x2FC
-#define IOCTL_SRESET 0x300
-#define IOCTL_CKSTP_OUT 0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS 0x310
-
-extern void iopin_initialize(void);
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
index 2be35b2..8ba8ae8 100644
--- a/cpu/mpc512x/Makefile
+++ b/cpu/mpc512x/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
new file mode 100644
index 0000000..01ab34a
--- /dev/null
+++ b/cpu/mpc512x/iopin.c
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <mpc512x.h>
+
+void iopin_initialize(iopin_t *ioregs_init, int len)
+{
+ short i, j, n, p;
+ u_long *reg;
+ immap_t *im = (immap_t *)CFG_IMMR;
+
+ reg = (u_long *)&(im->io_ctrl.regs[0]);
+
+ if (sizeof(ioregs_init) == 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or)
+ reg[j] |= ioregs_init[i].val;
+ else
+ reg[j] = ioregs_init[i].val;
+ }
+ }
+ return;
+}
diff --git a/include/mpc512x.h b/include/mpc512x.h
index b4cc2b9..a76b1ca 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -347,41 +347,226 @@
/* IO Control Register
*/
+#define IOCTL_MEM 0x000
+#define IOCTL_GP 0x004
+#define IOCTL_LPC_CLK 0x008
+#define IOCTL_LPC_OE 0x00C
+#define IOCTL_LPC_RWB 0x010
+#define IOCTL_LPC_ACK 0x014
+#define IOCTL_LPC_CS0 0x018
+#define IOCTL_NFC_CE0 0x01C
+#define IOCTL_LPC_CS1 0x020
+#define IOCTL_LPC_CS2 0x024
+#define IOCTL_LPC_AX03 0x028
+#define IOCTL_EMB_AX02 0x02C
+#define IOCTL_EMB_AX01 0x030
+#define IOCTL_EMB_AX00 0x034
+#define IOCTL_EMB_AD31 0x038
+#define IOCTL_EMB_AD30 0x03C
+#define IOCTL_EMB_AD29 0x040
+#define IOCTL_EMB_AD28 0x044
+#define IOCTL_EMB_AD27 0x048
+#define IOCTL_EMB_AD26 0x04C
+#define IOCTL_EMB_AD25 0x050
+#define IOCTL_EMB_AD24 0x054
+#define IOCTL_EMB_AD23 0x058
+#define IOCTL_EMB_AD22 0x05C
+#define IOCTL_EMB_AD21 0x060
+#define IOCTL_EMB_AD20 0x064
+#define IOCTL_EMB_AD19 0x068
+#define IOCTL_EMB_AD18 0x06C
+#define IOCTL_EMB_AD17 0x070
+#define IOCTL_EMB_AD16 0x074
+#define IOCTL_EMB_AD15 0x078
+#define IOCTL_EMB_AD14 0x07C
+#define IOCTL_EMB_AD13 0x080
+#define IOCTL_EMB_AD12 0x084
+#define IOCTL_EMB_AD11 0x088
+#define IOCTL_EMB_AD10 0x08C
+#define IOCTL_EMB_AD09 0x090
+#define IOCTL_EMB_AD08 0x094
+#define IOCTL_EMB_AD07 0x098
+#define IOCTL_EMB_AD06 0x09C
+#define IOCTL_EMB_AD05 0x0A0
+#define IOCTL_EMB_AD04 0x0A4
+#define IOCTL_EMB_AD03 0x0A8
+#define IOCTL_EMB_AD02 0x0AC
+#define IOCTL_EMB_AD01 0x0B0
+#define IOCTL_EMB_AD00 0x0B4
+#define IOCTL_PATA_CE1 0x0B8
+#define IOCTL_PATA_CE2 0x0BC
+#define IOCTL_PATA_ISOLATE 0x0C0
+#define IOCTL_PATA_IOR 0x0C4
+#define IOCTL_PATA_IOW 0x0C8
+#define IOCTL_PATA_IOCHRDY 0x0CC
+#define IOCTL_PATA_INTRQ 0x0D0
+#define IOCTL_PATA_DRQ 0x0D4
+#define IOCTL_PATA_DACK 0x0D8
+#define IOCTL_NFC_WP 0x0DC
+#define IOCTL_NFC_RB 0x0E0
+#define IOCTL_NFC_ALE 0x0E4
+#define IOCTL_NFC_CLE 0x0E8
+#define IOCTL_NFC_WE 0x0EC
+#define IOCTL_NFC_RE 0x0F0
+#define IOCTL_PCI_AD31 0x0F4
+#define IOCTL_PCI_AD30 0x0F8
+#define IOCTL_PCI_AD29 0x0FC
+#define IOCTL_PCI_AD28 0x100
+#define IOCTL_PCI_AD27 0x104
+#define IOCTL_PCI_AD26 0x108
+#define IOCTL_PCI_AD25 0x10C
+#define IOCTL_PCI_AD24 0x110
+#define IOCTL_PCI_AD23 0x114
+#define IOCTL_PCI_AD22 0x118
+#define IOCTL_PCI_AD21 0x11C
+#define IOCTL_PCI_AD20 0x120
+#define IOCTL_PCI_AD19 0x124
+#define IOCTL_PCI_AD18 0x128
+#define IOCTL_PCI_AD17 0x12C
+#define IOCTL_PCI_AD16 0x130
+#define IOCTL_PCI_AD15 0x134
+#define IOCTL_PCI_AD14 0x138
+#define IOCTL_PCI_AD13 0x13C
+#define IOCTL_PCI_AD12 0x140
+#define IOCTL_PCI_AD11 0x144
+#define IOCTL_PCI_AD10 0x148
+#define IOCTL_PCI_AD09 0x14C
+#define IOCTL_PCI_AD08 0x150
+#define IOCTL_PCI_AD07 0x154
+#define IOCTL_PCI_AD06 0x158
+#define IOCTL_PCI_AD05 0x15C
+#define IOCTL_PCI_AD04 0x160
+#define IOCTL_PCI_AD03 0x164
+#define IOCTL_PCI_AD02 0x168
+#define IOCTL_PCI_AD01 0x16C
+#define IOCTL_PCI_AD00 0x170
+#define IOCTL_PCI_CBE0 0x174
+#define IOCTL_PCI_CBE1 0x178
+#define IOCTL_PCI_CBE2 0x17C
+#define IOCTL_PCI_CBE3 0x180
+#define IOCTL_PCI_GNT2 0x184
+#define IOCTL_PCI_REQ2 0x188
+#define IOCTL_PCI_GNT1 0x18C
+#define IOCTL_PCI_REQ1 0x190
+#define IOCTL_PCI_GNT0 0x194
+#define IOCTL_PCI_REQ0 0x198
+#define IOCTL_PCI_INTA 0x19C
+#define IOCTL_PCI_CLK 0x1A0
+#define IOCTL_PCI_RST_OUT 0x1A4
+#define IOCTL_PCI_FRAME 0x1A8
+#define IOCTL_PCI_IDSEL 0x1AC
+#define IOCTL_PCI_DEVSEL 0x1B0
+#define IOCTL_PCI_IRDY 0x1B4
+#define IOCTL_PCI_TRDY 0x1B8
+#define IOCTL_PCI_STOP 0x1BC
+#define IOCTL_PCI_PAR 0x1C0
+#define IOCTL_PCI_PERR 0x1C4
+#define IOCTL_PCI_SERR 0x1C8
+#define IOCTL_SPDIF_TXCLK 0x1CC
+#define IOCTL_SPDIF_TX 0x1D0
+#define IOCTL_SPDIF_RX 0x1D4
+#define IOCTL_I2C0_SCL 0x1D8
+#define IOCTL_I2C0_SDA 0x1DC
+#define IOCTL_I2C1_SCL 0x1E0
+#define IOCTL_I2C1_SDA 0x1E4
+#define IOCTL_I2C2_SCL 0x1E8
+#define IOCTL_I2C2_SDA 0x1EC
+#define IOCTL_IRQ0 0x1F0
+#define IOCTL_IRQ1 0x1F4
+#define IOCTL_CAN1_TX 0x1F8
+#define IOCTL_CAN2_TX 0x1FC
+#define IOCTL_J1850_TX 0x200
+#define IOCTL_J1850_RX 0x204
+#define IOCTL_PSC_MCLK_IN 0x208
+#define IOCTL_PSC0_0 0x20C
+#define IOCTL_PSC0_1 0x210
+#define IOCTL_PSC0_2 0x214
+#define IOCTL_PSC0_3 0x218
+#define IOCTL_PSC0_4 0x21C
+#define IOCTL_PSC1_0 0x220
+#define IOCTL_PSC1_1 0x224
+#define IOCTL_PSC1_2 0x228
+#define IOCTL_PSC1_3 0x22C
+#define IOCTL_PSC1_4 0x230
+#define IOCTL_PSC2_0 0x234
+#define IOCTL_PSC2_1 0x238
+#define IOCTL_PSC2_2 0x23C
+#define IOCTL_PSC2_3 0x240
+#define IOCTL_PSC2_4 0x244
+#define IOCTL_PSC3_0 0x248
+#define IOCTL_PSC3_1 0x24C
+#define IOCTL_PSC3_2 0x250
+#define IOCTL_PSC3_3 0x254
+#define IOCTL_PSC3_4 0x258
+#define IOCTL_PSC4_0 0x25C
+#define IOCTL_PSC4_1 0x260
+#define IOCTL_PSC4_2 0x264
+#define IOCTL_PSC4_3 0x268
+#define IOCTL_PSC4_4 0x26C
+#define IOCTL_PSC5_0 0x270
+#define IOCTL_PSC5_1 0x274
+#define IOCTL_PSC5_2 0x278
+#define IOCTL_PSC5_3 0x27C
+#define IOCTL_PSC5_4 0x280
+#define IOCTL_PSC6_0 0x284
+#define IOCTL_PSC6_1 0x288
+#define IOCTL_PSC6_2 0x28C
+#define IOCTL_PSC6_3 0x290
+#define IOCTL_PSC6_4 0x294
+#define IOCTL_PSC7_0 0x298
+#define IOCTL_PSC7_1 0x29C
+#define IOCTL_PSC7_2 0x2A0
+#define IOCTL_PSC7_3 0x2A4
+#define IOCTL_PSC7_4 0x2A8
+#define IOCTL_PSC8_0 0x2AC
+#define IOCTL_PSC8_1 0x2B0
+#define IOCTL_PSC8_2 0x2B4
+#define IOCTL_PSC8_3 0x2B8
+#define IOCTL_PSC8_4 0x2BC
+#define IOCTL_PSC9_0 0x2C0
+#define IOCTL_PSC9_1 0x2C4
+#define IOCTL_PSC9_2 0x2C8
+#define IOCTL_PSC9_3 0x2CC
+#define IOCTL_PSC9_4 0x2D0
+#define IOCTL_PSC10_0 0x2D4
+#define IOCTL_PSC10_1 0x2D8
+#define IOCTL_PSC10_2 0x2DC
+#define IOCTL_PSC10_3 0x2E0
+#define IOCTL_PSC10_4 0x2E4
+#define IOCTL_PSC11_0 0x2E8
+#define IOCTL_PSC11_1 0x2EC
+#define IOCTL_PSC11_2 0x2F0
+#define IOCTL_PSC11_3 0x2F4
+#define IOCTL_PSC11_4 0x2F8
+#define IOCTL_HRESET 0x2FC
+#define IOCTL_SRESET 0x300
+#define IOCTL_CKSTP_OUT 0x304
+#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
+#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
+#define IOCTL_USB2_PHY_DRVV_BUS 0x310
+
+#ifndef __ASSEMBLY__
+
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
+#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
+#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
+#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
+#define IO_PIN_DS(v) ((v)) /* slew rate */
+
+typedef struct iopin_t {
+ int p_offset; /* offset from IOCTL_MEM_OFFSET */
+ int nr_pins; /* number of pins to set this way */
+ int bit_or; /* or in the value instead of overwrite */
+ u_long val; /* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+#endif
/* Indexes in regs array */
-#define MEM_IDX 0x00
-#define PATA_CE1_IDX 0x2e
-#define PATA_CE2_IDX 0x2f
-#define PATA_ISOLATE_IDX 0x30
-#define PATA_IOR_IDX 0x31
-#define PATA_IOW_IDX 0x32
-#define PATA_IOCHRDY_IDX 0x33
-#define PATA_INTRQ_IDX 0x34
-#define PATA_DRQ_IDX 0x35
-#define PATA_DACK_IDX 0x36
-#define SPDIF_TXCLOCK_IDX 0x73
-#define SPDIF_TX_IDX 0x74
-#define SPDIF_RX_IDX 0x75
-#define PSC0_0_IDX 0x83
-#define PSC0_1_IDX 0x84
-#define PSC0_2_IDX 0x85
-#define PSC0_3_IDX 0x86
-#define PSC0_4_IDX 0x87
-#define PSC1_0_IDX 0x88
-#define PSC1_1_IDX 0x89
-#define PSC1_2_IDX 0x8a
-#define PSC1_3_IDX 0x8b
-#define PSC1_4_IDX 0x8c
-#define PSC2_0_IDX 0x8d
-#define PSC2_1_IDX 0x8e
-#define PSC2_2_IDX 0x8f
-#define PSC2_3_IDX 0x90
-#define PSC2_4_IDX 0x91
-
-#define IOCTRL_FUNCMUX_SHIFT 7
-#define IOCTRL_FUNCMUX_FEC 1
-#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
-
/* Set for DDR */
#define IOCTRL_MUX_DDR 0x00000036
--
1.5.6.GIT
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot-Users] unassigned-patches/7: [PATCH] Move mpc5121 iopoin feature from board specific to common files.
2008-07-15 10:13 [U-Boot-Users] [PATCH] Move mpc5121 iopoin feature from board specific to common files Kenneth Johansson
@ 2008-07-29 14:25 ` u-boot at bugs.denx.de
2008-08-04 17:06 ` [U-Boot-Users] " John Rigby
1 sibling, 0 replies; 3+ messages in thread
From: u-boot at bugs.denx.de @ 2008-07-29 14:25 UTC (permalink / raw)
To: u-boot
And in the process eliminate some duplicate register defines.
Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
---
Added to GNATS database as unassigned-patches/7
>Responsible: patch-coord
>Message-Id: <1216116818.2007.3.camel@localhost.localdomain>
>In-Reply-To:
>References:
>Patch-Date: Tue Jul 15 12:13:38 +0200 2008
---
board/ads5121/Makefile | 2 +-
board/ads5121/ads5121.c | 58 ++++++++++-
board/ads5121/iopin.c | 115 ---------------------
board/ads5121/iopin.h | 222 -----------------------------------------
cpu/mpc512x/Makefile | 2 +-
cpu/mpc512x/iopin.c | 49 +++++++++
include/mpc512x.h | 251 ++++++++++++++++++++++++++++++++++++++++------
7 files changed, 323 insertions(+), 376 deletions(-)
delete mode 100644 board/ads5121/iopin.c
delete mode 100644 board/ads5121/iopin.h
create mode 100644 cpu/mpc512x/iopin.c
diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index 5b95682..470848f 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
LIB = $(obj)lib$(BOARD).a
-COBJS-y := $(BOARD).o iopin.o
+COBJS-y := $(BOARD).o
COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 8452054..ba3d7d2 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -23,14 +23,12 @@
#include <common.h>
#include <mpc512x.h>
-#include "iopin.h"
#include <asm/bitops.h>
#include <command.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
-#include "iopin.h" /* for iopin_initialize() prototype */
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
@@ -124,7 +122,7 @@ long int fixed_sdram (void)
u32 i;
/* Initialize IO Control */
- im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+ im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
/* Initialize DDR Local Window */
im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
@@ -237,6 +235,56 @@ int misc_init_r(void)
return 0;
}
+static iopin_t ioregs_init[] = {
+ /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+ {
+ IOCTL_SPDIF_TXCLK, 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* Set highest Slew on 9 PATA pins */
+ {
+ IOCTL_PATA_CE1, 9, 1,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+ {
+ IOCTL_PSC0_0, 15, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=SPDIF_TXCLK */
+ {
+ IOCTL_LPC_CS1, 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+ {
+ IOCTL_I2C1_SCL, 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU CLK */
+ {
+ IOCTL_PSC6_0, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIU_HSYNC */
+ {
+ IOCTL_PSC6_1, 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+ {
+ IOCTL_PSC6_4, 26, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
int checkboard (void)
{
@@ -246,7 +294,9 @@ int checkboard (void)
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
- iopin_initialize();
+
+
+ iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
return 0;
}
diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c
deleted file mode 100644
index a6792a0..0000000
--- a/board/ads5121/iopin.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include "iopin.h"
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
-#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
-#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
-#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
-#define IO_PIN_DS(v) ((v)) /* slew rate */
-
-static struct iopin_t {
- int p_offset; /* offset from IOCTL_MEM_OFFSET */
- int nr_pins; /* number of pins to set this way */
- int bit_or; /* or in the value instead of overwrite */
- u_long val; /* value to write or or */
-} ioregs_init[] = {
- /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
- {
- IOCTL_SPDIF_TXCLK, 3, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* Set highest Slew on 9 PATA pins */
- {
- IOCTL_PATA_CE1, 9, 1,
- IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
- {
- IOCTL_PSC0_0, 15, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC1=SPDIF_TXCLK */
- {
- IOCTL_LPC_CS1, 1, 0,
- IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
- {
- IOCTL_I2C1_SCL, 2, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU CLK */
- {
- IOCTL_PSC6_0, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
- },
- /* FUNC2=DIU_HSYNC */
- {
- IOCTL_PSC6_1, 1, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- },
- /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
- {
- IOCTL_PSC6_4, 26, 0,
- IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
- IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
- }
-};
-
-void iopin_initialize(void)
-{
- short i, j, n, p;
- u_long *reg;
- immap_t *im = (immap_t *)CFG_IMMR;
-
- reg = (u_long *)&(im->io_ctrl.regs[0]);
-
- if (sizeof(ioregs_init) == 0)
- return;
-
- n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
-
- for (i = 0; i < n; i++) {
- for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
- p < ioregs_init[i].nr_pins; p++, j++) {
- if (ioregs_init[i].bit_or)
- reg[j] |= ioregs_init[i].val;
- else
- reg[j] = ioregs_init[i].val;
- }
- }
- return;
-}
diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h
deleted file mode 100644
index 7ef8472..0000000
--- a/board/ads5121/iopin.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define IOCTL_MEM 0x000
-#define IOCTL_GP 0x004
-#define IOCTL_LPC_CLK 0x008
-#define IOCTL_LPC_OE 0x00C
-#define IOCTL_LPC_RWB 0x010
-#define IOCTL_LPC_ACK 0x014
-#define IOCTL_LPC_CS0 0x018
-#define IOCTL_NFC_CE0 0x01C
-#define IOCTL_LPC_CS1 0x020
-#define IOCTL_LPC_CS2 0x024
-#define IOCTL_LPC_AX03 0x028
-#define IOCTL_EMB_AX02 0x02C
-#define IOCTL_EMB_AX01 0x030
-#define IOCTL_EMB_AX00 0x034
-#define IOCTL_EMB_AD31 0x038
-#define IOCTL_EMB_AD30 0x03C
-#define IOCTL_EMB_AD29 0x040
-#define IOCTL_EMB_AD28 0x044
-#define IOCTL_EMB_AD27 0x048
-#define IOCTL_EMB_AD26 0x04C
-#define IOCTL_EMB_AD25 0x050
-#define IOCTL_EMB_AD24 0x054
-#define IOCTL_EMB_AD23 0x058
-#define IOCTL_EMB_AD22 0x05C
-#define IOCTL_EMB_AD21 0x060
-#define IOCTL_EMB_AD20 0x064
-#define IOCTL_EMB_AD19 0x068
-#define IOCTL_EMB_AD18 0x06C
-#define IOCTL_EMB_AD17 0x070
-#define IOCTL_EMB_AD16 0x074
-#define IOCTL_EMB_AD15 0x078
-#define IOCTL_EMB_AD14 0x07C
-#define IOCTL_EMB_AD13 0x080
-#define IOCTL_EMB_AD12 0x084
-#define IOCTL_EMB_AD11 0x088
-#define IOCTL_EMB_AD10 0x08C
-#define IOCTL_EMB_AD09 0x090
-#define IOCTL_EMB_AD08 0x094
-#define IOCTL_EMB_AD07 0x098
-#define IOCTL_EMB_AD06 0x09C
-#define IOCTL_EMB_AD05 0x0A0
-#define IOCTL_EMB_AD04 0x0A4
-#define IOCTL_EMB_AD03 0x0A8
-#define IOCTL_EMB_AD02 0x0AC
-#define IOCTL_EMB_AD01 0x0B0
-#define IOCTL_EMB_AD00 0x0B4
-#define IOCTL_PATA_CE1 0x0B8
-#define IOCTL_PATA_CE2 0x0BC
-#define IOCTL_PATA_ISOLATE 0x0C0
-#define IOCTL_PATA_IOR 0x0C4
-#define IOCTL_PATA_IOW 0x0C8
-#define IOCTL_PATA_IOCHRDY 0x0CC
-#define IOCTL_PATA_INTRQ 0x0D0
-#define IOCTL_PATA_DRQ 0x0D4
-#define IOCTL_PATA_DACK 0x0D8
-#define IOCTL_NFC_WP 0x0DC
-#define IOCTL_NFC_RB 0x0E0
-#define IOCTL_NFC_ALE 0x0E4
-#define IOCTL_NFC_CLE 0x0E8
-#define IOCTL_NFC_WE 0x0EC
-#define IOCTL_NFC_RE 0x0F0
-#define IOCTL_PCI_AD31 0x0F4
-#define IOCTL_PCI_AD30 0x0F8
-#define IOCTL_PCI_AD29 0x0FC
-#define IOCTL_PCI_AD28 0x100
-#define IOCTL_PCI_AD27 0x104
-#define IOCTL_PCI_AD26 0x108
-#define IOCTL_PCI_AD25 0x10C
-#define IOCTL_PCI_AD24 0x110
-#define IOCTL_PCI_AD23 0x114
-#define IOCTL_PCI_AD22 0x118
-#define IOCTL_PCI_AD21 0x11C
-#define IOCTL_PCI_AD20 0x120
-#define IOCTL_PCI_AD19 0x124
-#define IOCTL_PCI_AD18 0x128
-#define IOCTL_PCI_AD17 0x12C
-#define IOCTL_PCI_AD16 0x130
-#define IOCTL_PCI_AD15 0x134
-#define IOCTL_PCI_AD14 0x138
-#define IOCTL_PCI_AD13 0x13C
-#define IOCTL_PCI_AD12 0x140
-#define IOCTL_PCI_AD11 0x144
-#define IOCTL_PCI_AD10 0x148
-#define IOCTL_PCI_AD09 0x14C
-#define IOCTL_PCI_AD08 0x150
-#define IOCTL_PCI_AD07 0x154
-#define IOCTL_PCI_AD06 0x158
-#define IOCTL_PCI_AD05 0x15C
-#define IOCTL_PCI_AD04 0x160
-#define IOCTL_PCI_AD03 0x164
-#define IOCTL_PCI_AD02 0x168
-#define IOCTL_PCI_AD01 0x16C
-#define IOCTL_PCI_AD00 0x170
-#define IOCTL_PCI_CBE0 0x174
-#define IOCTL_PCI_CBE1 0x178
-#define IOCTL_PCI_CBE2 0x17C
-#define IOCTL_PCI_CBE3 0x180
-#define IOCTL_PCI_GNT2 0x184
-#define IOCTL_PCI_REQ2 0x188
-#define IOCTL_PCI_GNT1 0x18C
-#define IOCTL_PCI_REQ1 0x190
-#define IOCTL_PCI_GNT0 0x194
-#define IOCTL_PCI_REQ0 0x198
-#define IOCTL_PCI_INTA 0x19C
-#define IOCTL_PCI_CLK 0x1A0
-#define IOCTL_PCI_RST_OUT 0x1A4
-#define IOCTL_PCI_FRAME 0x1A8
-#define IOCTL_PCI_IDSEL 0x1AC
-#define IOCTL_PCI_DEVSEL 0x1B0
-#define IOCTL_PCI_IRDY 0x1B4
-#define IOCTL_PCI_TRDY 0x1B8
-#define IOCTL_PCI_STOP 0x1BC
-#define IOCTL_PCI_PAR 0x1C0
-#define IOCTL_PCI_PERR 0x1C4
-#define IOCTL_PCI_SERR 0x1C8
-#define IOCTL_SPDIF_TXCLK 0x1CC
-#define IOCTL_SPDIF_TX 0x1D0
-#define IOCTL_SPDIF_RX 0x1D4
-#define IOCTL_I2C0_SCL 0x1D8
-#define IOCTL_I2C0_SDA 0x1DC
-#define IOCTL_I2C1_SCL 0x1E0
-#define IOCTL_I2C1_SDA 0x1E4
-#define IOCTL_I2C2_SCL 0x1E8
-#define IOCTL_I2C2_SDA 0x1EC
-#define IOCTL_IRQ0 0x1F0
-#define IOCTL_IRQ1 0x1F4
-#define IOCTL_CAN1_TX 0x1F8
-#define IOCTL_CAN2_TX 0x1FC
-#define IOCTL_J1850_TX 0x200
-#define IOCTL_J1850_RX 0x204
-#define IOCTL_PSC_MCLK_IN 0x208
-#define IOCTL_PSC0_0 0x20C
-#define IOCTL_PSC0_1 0x210
-#define IOCTL_PSC0_2 0x214
-#define IOCTL_PSC0_3 0x218
-#define IOCTL_PSC0_4 0x21C
-#define IOCTL_PSC1_0 0x220
-#define IOCTL_PSC1_1 0x224
-#define IOCTL_PSC1_2 0x228
-#define IOCTL_PSC1_3 0x22C
-#define IOCTL_PSC1_4 0x230
-#define IOCTL_PSC2_0 0x234
-#define IOCTL_PSC2_1 0x238
-#define IOCTL_PSC2_2 0x23C
-#define IOCTL_PSC2_3 0x240
-#define IOCTL_PSC2_4 0x244
-#define IOCTL_PSC3_0 0x248
-#define IOCTL_PSC3_1 0x24C
-#define IOCTL_PSC3_2 0x250
-#define IOCTL_PSC3_3 0x254
-#define IOCTL_PSC3_4 0x258
-#define IOCTL_PSC4_0 0x25C
-#define IOCTL_PSC4_1 0x260
-#define IOCTL_PSC4_2 0x264
-#define IOCTL_PSC4_3 0x268
-#define IOCTL_PSC4_4 0x26C
-#define IOCTL_PSC5_0 0x270
-#define IOCTL_PSC5_1 0x274
-#define IOCTL_PSC5_2 0x278
-#define IOCTL_PSC5_3 0x27C
-#define IOCTL_PSC5_4 0x280
-#define IOCTL_PSC6_0 0x284
-#define IOCTL_PSC6_1 0x288
-#define IOCTL_PSC6_2 0x28C
-#define IOCTL_PSC6_3 0x290
-#define IOCTL_PSC6_4 0x294
-#define IOCTL_PSC7_0 0x298
-#define IOCTL_PSC7_1 0x29C
-#define IOCTL_PSC7_2 0x2A0
-#define IOCTL_PSC7_3 0x2A4
-#define IOCTL_PSC7_4 0x2A8
-#define IOCTL_PSC8_0 0x2AC
-#define IOCTL_PSC8_1 0x2B0
-#define IOCTL_PSC8_2 0x2B4
-#define IOCTL_PSC8_3 0x2B8
-#define IOCTL_PSC8_4 0x2BC
-#define IOCTL_PSC9_0 0x2C0
-#define IOCTL_PSC9_1 0x2C4
-#define IOCTL_PSC9_2 0x2C8
-#define IOCTL_PSC9_3 0x2CC
-#define IOCTL_PSC9_4 0x2D0
-#define IOCTL_PSC10_0 0x2D4
-#define IOCTL_PSC10_1 0x2D8
-#define IOCTL_PSC10_2 0x2DC
-#define IOCTL_PSC10_3 0x2E0
-#define IOCTL_PSC10_4 0x2E4
-#define IOCTL_PSC11_0 0x2E8
-#define IOCTL_PSC11_1 0x2EC
-#define IOCTL_PSC11_2 0x2F0
-#define IOCTL_PSC11_3 0x2F4
-#define IOCTL_PSC11_4 0x2F8
-#define IOCTL_HRESET 0x2FC
-#define IOCTL_SRESET 0x300
-#define IOCTL_CKSTP_OUT 0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS 0x310
-
-extern void iopin_initialize(void);
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
index 2be35b2..8ba8ae8 100644
--- a/cpu/mpc512x/Makefile
+++ b/cpu/mpc512x/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
new file mode 100644
index 0000000..01ab34a
--- /dev/null
+++ b/cpu/mpc512x/iopin.c
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <mpc512x.h>
+
+void iopin_initialize(iopin_t *ioregs_init, int len)
+{
+ short i, j, n, p;
+ u_long *reg;
+ immap_t *im = (immap_t *)CFG_IMMR;
+
+ reg = (u_long *)&(im->io_ctrl.regs[0]);
+
+ if (sizeof(ioregs_init) == 0)
+ return;
+
+ for (i = 0; i < len; i++) {
+ for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+ p < ioregs_init[i].nr_pins; p++, j++) {
+ if (ioregs_init[i].bit_or)
+ reg[j] |= ioregs_init[i].val;
+ else
+ reg[j] = ioregs_init[i].val;
+ }
+ }
+ return;
+}
diff --git a/include/mpc512x.h b/include/mpc512x.h
index b4cc2b9..a76b1ca 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -347,41 +347,226 @@
/* IO Control Register
*/
+#define IOCTL_MEM 0x000
+#define IOCTL_GP 0x004
+#define IOCTL_LPC_CLK 0x008
+#define IOCTL_LPC_OE 0x00C
+#define IOCTL_LPC_RWB 0x010
+#define IOCTL_LPC_ACK 0x014
+#define IOCTL_LPC_CS0 0x018
+#define IOCTL_NFC_CE0 0x01C
+#define IOCTL_LPC_CS1 0x020
+#define IOCTL_LPC_CS2 0x024
+#define IOCTL_LPC_AX03 0x028
+#define IOCTL_EMB_AX02 0x02C
+#define IOCTL_EMB_AX01 0x030
+#define IOCTL_EMB_AX00 0x034
+#define IOCTL_EMB_AD31 0x038
+#define IOCTL_EMB_AD30 0x03C
+#define IOCTL_EMB_AD29 0x040
+#define IOCTL_EMB_AD28 0x044
+#define IOCTL_EMB_AD27 0x048
+#define IOCTL_EMB_AD26 0x04C
+#define IOCTL_EMB_AD25 0x050
+#define IOCTL_EMB_AD24 0x054
+#define IOCTL_EMB_AD23 0x058
+#define IOCTL_EMB_AD22 0x05C
+#define IOCTL_EMB_AD21 0x060
+#define IOCTL_EMB_AD20 0x064
+#define IOCTL_EMB_AD19 0x068
+#define IOCTL_EMB_AD18 0x06C
+#define IOCTL_EMB_AD17 0x070
+#define IOCTL_EMB_AD16 0x074
+#define IOCTL_EMB_AD15 0x078
+#define IOCTL_EMB_AD14 0x07C
+#define IOCTL_EMB_AD13 0x080
+#define IOCTL_EMB_AD12 0x084
+#define IOCTL_EMB_AD11 0x088
+#define IOCTL_EMB_AD10 0x08C
+#define IOCTL_EMB_AD09 0x090
+#define IOCTL_EMB_AD08 0x094
+#define IOCTL_EMB_AD07 0x098
+#define IOCTL_EMB_AD06 0x09C
+#define IOCTL_EMB_AD05 0x0A0
+#define IOCTL_EMB_AD04 0x0A4
+#define IOCTL_EMB_AD03 0x0A8
+#define IOCTL_EMB_AD02 0x0AC
+#define IOCTL_EMB_AD01 0x0B0
+#define IOCTL_EMB_AD00 0x0B4
+#define IOCTL_PATA_CE1 0x0B8
+#define IOCTL_PATA_CE2 0x0BC
+#define IOCTL_PATA_ISOLATE 0x0C0
+#define IOCTL_PATA_IOR 0x0C4
+#define IOCTL_PATA_IOW 0x0C8
+#define IOCTL_PATA_IOCHRDY 0x0CC
+#define IOCTL_PATA_INTRQ 0x0D0
+#define IOCTL_PATA_DRQ 0x0D4
+#define IOCTL_PATA_DACK 0x0D8
+#define IOCTL_NFC_WP 0x0DC
+#define IOCTL_NFC_RB 0x0E0
+#define IOCTL_NFC_ALE 0x0E4
+#define IOCTL_NFC_CLE 0x0E8
+#define IOCTL_NFC_WE 0x0EC
+#define IOCTL_NFC_RE 0x0F0
+#define IOCTL_PCI_AD31 0x0F4
+#define IOCTL_PCI_AD30 0x0F8
+#define IOCTL_PCI_AD29 0x0FC
+#define IOCTL_PCI_AD28 0x100
+#define IOCTL_PCI_AD27 0x104
+#define IOCTL_PCI_AD26 0x108
+#define IOCTL_PCI_AD25 0x10C
+#define IOCTL_PCI_AD24 0x110
+#define IOCTL_PCI_AD23 0x114
+#define IOCTL_PCI_AD22 0x118
+#define IOCTL_PCI_AD21 0x11C
+#define IOCTL_PCI_AD20 0x120
+#define IOCTL_PCI_AD19 0x124
+#define IOCTL_PCI_AD18 0x128
+#define IOCTL_PCI_AD17 0x12C
+#define IOCTL_PCI_AD16 0x130
+#define IOCTL_PCI_AD15 0x134
+#define IOCTL_PCI_AD14 0x138
+#define IOCTL_PCI_AD13 0x13C
+#define IOCTL_PCI_AD12 0x140
+#define IOCTL_PCI_AD11 0x144
+#define IOCTL_PCI_AD10 0x148
+#define IOCTL_PCI_AD09 0x14C
+#define IOCTL_PCI_AD08 0x150
+#define IOCTL_PCI_AD07 0x154
+#define IOCTL_PCI_AD06 0x158
+#define IOCTL_PCI_AD05 0x15C
+#define IOCTL_PCI_AD04 0x160
+#define IOCTL_PCI_AD03 0x164
+#define IOCTL_PCI_AD02 0x168
+#define IOCTL_PCI_AD01 0x16C
+#define IOCTL_PCI_AD00 0x170
+#define IOCTL_PCI_CBE0 0x174
+#define IOCTL_PCI_CBE1 0x178
+#define IOCTL_PCI_CBE2 0x17C
+#define IOCTL_PCI_CBE3 0x180
+#define IOCTL_PCI_GNT2 0x184
+#define IOCTL_PCI_REQ2 0x188
+#define IOCTL_PCI_GNT1 0x18C
+#define IOCTL_PCI_REQ1 0x190
+#define IOCTL_PCI_GNT0 0x194
+#define IOCTL_PCI_REQ0 0x198
+#define IOCTL_PCI_INTA 0x19C
+#define IOCTL_PCI_CLK 0x1A0
+#define IOCTL_PCI_RST_OUT 0x1A4
+#define IOCTL_PCI_FRAME 0x1A8
+#define IOCTL_PCI_IDSEL 0x1AC
+#define IOCTL_PCI_DEVSEL 0x1B0
+#define IOCTL_PCI_IRDY 0x1B4
+#define IOCTL_PCI_TRDY 0x1B8
+#define IOCTL_PCI_STOP 0x1BC
+#define IOCTL_PCI_PAR 0x1C0
+#define IOCTL_PCI_PERR 0x1C4
+#define IOCTL_PCI_SERR 0x1C8
+#define IOCTL_SPDIF_TXCLK 0x1CC
+#define IOCTL_SPDIF_TX 0x1D0
+#define IOCTL_SPDIF_RX 0x1D4
+#define IOCTL_I2C0_SCL 0x1D8
+#define IOCTL_I2C0_SDA 0x1DC
+#define IOCTL_I2C1_SCL 0x1E0
+#define IOCTL_I2C1_SDA 0x1E4
+#define IOCTL_I2C2_SCL 0x1E8
+#define IOCTL_I2C2_SDA 0x1EC
+#define IOCTL_IRQ0 0x1F0
+#define IOCTL_IRQ1 0x1F4
+#define IOCTL_CAN1_TX 0x1F8
+#define IOCTL_CAN2_TX 0x1FC
+#define IOCTL_J1850_TX 0x200
+#define IOCTL_J1850_RX 0x204
+#define IOCTL_PSC_MCLK_IN 0x208
+#define IOCTL_PSC0_0 0x20C
+#define IOCTL_PSC0_1 0x210
+#define IOCTL_PSC0_2 0x214
+#define IOCTL_PSC0_3 0x218
+#define IOCTL_PSC0_4 0x21C
+#define IOCTL_PSC1_0 0x220
+#define IOCTL_PSC1_1 0x224
+#define IOCTL_PSC1_2 0x228
+#define IOCTL_PSC1_3 0x22C
+#define IOCTL_PSC1_4 0x230
+#define IOCTL_PSC2_0 0x234
+#define IOCTL_PSC2_1 0x238
+#define IOCTL_PSC2_2 0x23C
+#define IOCTL_PSC2_3 0x240
+#define IOCTL_PSC2_4 0x244
+#define IOCTL_PSC3_0 0x248
+#define IOCTL_PSC3_1 0x24C
+#define IOCTL_PSC3_2 0x250
+#define IOCTL_PSC3_3 0x254
+#define IOCTL_PSC3_4 0x258
+#define IOCTL_PSC4_0 0x25C
+#define IOCTL_PSC4_1 0x260
+#define IOCTL_PSC4_2 0x264
+#define IOCTL_PSC4_3 0x268
+#define IOCTL_PSC4_4 0x26C
+#define IOCTL_PSC5_0 0x270
+#define IOCTL_PSC5_1 0x274
+#define IOCTL_PSC5_2 0x278
+#define IOCTL_PSC5_3 0x27C
+#define IOCTL_PSC5_4 0x280
+#define IOCTL_PSC6_0 0x284
+#define IOCTL_PSC6_1 0x288
+#define IOCTL_PSC6_2 0x28C
+#define IOCTL_PSC6_3 0x290
+#define IOCTL_PSC6_4 0x294
+#define IOCTL_PSC7_0 0x298
+#define IOCTL_PSC7_1 0x29C
+#define IOCTL_PSC7_2 0x2A0
+#define IOCTL_PSC7_3 0x2A4
+#define IOCTL_PSC7_4 0x2A8
+#define IOCTL_PSC8_0 0x2AC
+#define IOCTL_PSC8_1 0x2B0
+#define IOCTL_PSC8_2 0x2B4
+#define IOCTL_PSC8_3 0x2B8
+#define IOCTL_PSC8_4 0x2BC
+#define IOCTL_PSC9_0 0x2C0
+#define IOCTL_PSC9_1 0x2C4
+#define IOCTL_PSC9_2 0x2C8
+#define IOCTL_PSC9_3 0x2CC
+#define IOCTL_PSC9_4 0x2D0
+#define IOCTL_PSC10_0 0x2D4
+#define IOCTL_PSC10_1 0x2D8
+#define IOCTL_PSC10_2 0x2DC
+#define IOCTL_PSC10_3 0x2E0
+#define IOCTL_PSC10_4 0x2E4
+#define IOCTL_PSC11_0 0x2E8
+#define IOCTL_PSC11_1 0x2EC
+#define IOCTL_PSC11_2 0x2F0
+#define IOCTL_PSC11_3 0x2F4
+#define IOCTL_PSC11_4 0x2F8
+#define IOCTL_HRESET 0x2FC
+#define IOCTL_SRESET 0x300
+#define IOCTL_CKSTP_OUT 0x304
+#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
+#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
+#define IOCTL_USB2_PHY_DRVV_BUS 0x310
+
+#ifndef __ASSEMBLY__
+
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
+#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
+#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
+#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
+#define IO_PIN_DS(v) ((v)) /* slew rate */
+
+typedef struct iopin_t {
+ int p_offset; /* offset from IOCTL_MEM_OFFSET */
+ int nr_pins; /* number of pins to set this way */
+ int bit_or; /* or in the value instead of overwrite */
+ u_long val; /* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+#endif
/* Indexes in regs array */
-#define MEM_IDX 0x00
-#define PATA_CE1_IDX 0x2e
-#define PATA_CE2_IDX 0x2f
-#define PATA_ISOLATE_IDX 0x30
-#define PATA_IOR_IDX 0x31
-#define PATA_IOW_IDX 0x32
-#define PATA_IOCHRDY_IDX 0x33
-#define PATA_INTRQ_IDX 0x34
-#define PATA_DRQ_IDX 0x35
-#define PATA_DACK_IDX 0x36
-#define SPDIF_TXCLOCK_IDX 0x73
-#define SPDIF_TX_IDX 0x74
-#define SPDIF_RX_IDX 0x75
-#define PSC0_0_IDX 0x83
-#define PSC0_1_IDX 0x84
-#define PSC0_2_IDX 0x85
-#define PSC0_3_IDX 0x86
-#define PSC0_4_IDX 0x87
-#define PSC1_0_IDX 0x88
-#define PSC1_1_IDX 0x89
-#define PSC1_2_IDX 0x8a
-#define PSC1_3_IDX 0x8b
-#define PSC1_4_IDX 0x8c
-#define PSC2_0_IDX 0x8d
-#define PSC2_1_IDX 0x8e
-#define PSC2_2_IDX 0x8f
-#define PSC2_3_IDX 0x90
-#define PSC2_4_IDX 0x91
-
-#define IOCTRL_FUNCMUX_SHIFT 7
-#define IOCTRL_FUNCMUX_FEC 1
-#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
-
/* Set for DDR */
#define IOCTRL_MUX_DDR 0x00000036
--
1.5.6.GIT
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot-Users] [PATCH] Move mpc5121 iopoin feature from board specific to common files.
2008-07-15 10:13 [U-Boot-Users] [PATCH] Move mpc5121 iopoin feature from board specific to common files Kenneth Johansson
2008-07-29 14:25 ` [U-Boot-Users] unassigned-patches/7: " u-boot at bugs.denx.de
@ 2008-08-04 17:06 ` John Rigby
1 sibling, 0 replies; 3+ messages in thread
From: John Rigby @ 2008-08-04 17:06 UTC (permalink / raw)
To: u-boot
Kenneth,
My kernel boots without your patch but not with it. I haven't done any
debug yet so I don't know why.
John
Kenneth Johansson wrote:
> And in the process eliminate some duplicate register defines.
>
>
> Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
> ---
> board/ads5121/Makefile | 2 +-
> board/ads5121/ads5121.c | 58 ++++++++++-
> board/ads5121/iopin.c | 115 ---------------------
> board/ads5121/iopin.h | 222 -----------------------------------------
> cpu/mpc512x/Makefile | 2 +-
> cpu/mpc512x/iopin.c | 49 +++++++++
> include/mpc512x.h | 251 ++++++++++++++++++++++++++++++++++++++++------
> 7 files changed, 323 insertions(+), 376 deletions(-)
> delete mode 100644 board/ads5121/iopin.c
> delete mode 100644 board/ads5121/iopin.h
> create mode 100644 cpu/mpc512x/iopin.c
>
> diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
> index 5b95682..470848f 100644
> --- a/board/ads5121/Makefile
> +++ b/board/ads5121/Makefile
> @@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
>
> LIB = $(obj)lib$(BOARD).a
>
> -COBJS-y := $(BOARD).o iopin.o
> +COBJS-y := $(BOARD).o
> COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
> COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
> COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
> diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
> index 8452054..ba3d7d2 100644
> --- a/board/ads5121/ads5121.c
> +++ b/board/ads5121/ads5121.c
> @@ -23,14 +23,12 @@
>
> #include <common.h>
> #include <mpc512x.h>
> -#include "iopin.h"
> #include <asm/bitops.h>
> #include <command.h>
> #include <fdt_support.h>
> #ifdef CONFIG_MISC_INIT_R
> #include <i2c.h>
> #endif
> -#include "iopin.h" /* for iopin_initialize() prototype */
>
> /* Clocks in use */
> #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
> @@ -124,7 +122,7 @@ long int fixed_sdram (void)
> u32 i;
>
> /* Initialize IO Control */
> - im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
> + im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
>
> /* Initialize DDR Local Window */
> im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
> @@ -237,6 +235,56 @@ int misc_init_r(void)
>
> return 0;
> }
> +static iopin_t ioregs_init[] = {
> + /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
> + {
> + IOCTL_SPDIF_TXCLK, 3, 0,
> + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> + },
> + /* Set highest Slew on 9 PATA pins */
> + {
> + IOCTL_PATA_CE1, 9, 1,
> + IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> + },
> + /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
> + {
> + IOCTL_PSC0_0, 15, 0,
> + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> + },
> + /* FUNC1=SPDIF_TXCLK */
> + {
> + IOCTL_LPC_CS1, 1, 0,
> + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> + },
> + /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
> + {
> + IOCTL_I2C1_SCL, 2, 0,
> + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> + },
> + /* FUNC2=DIU CLK */
> + {
> + IOCTL_PSC6_0, 1, 0,
> + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> + },
> + /* FUNC2=DIU_HSYNC */
> + {
> + IOCTL_PSC6_1, 1, 0,
> + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> + },
> + /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
> + {
> + IOCTL_PSC6_4, 26, 0,
> + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> + }
> +};
>
> int checkboard (void)
> {
> @@ -246,7 +294,9 @@ int checkboard (void)
> printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
> brd_rev, cpld_rev);
> /* initialize function mux & slew rate IO inter alia on IO Pins */
> - iopin_initialize();
> +
> +
> + iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
>
> return 0;
> }
> diff --git a/board/ads5121/iopin.c b/board/ads5121/iopin.c
> deleted file mode 100644
> index a6792a0..0000000
> --- a/board/ads5121/iopin.c
> +++ /dev/null
> @@ -1,115 +0,0 @@
> -/*
> - * (C) Copyright 2008
> - * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
> - * mpc512x I/O pin/pad initialization for the ADS5121 board
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <linux/types.h>
> -#include "iopin.h"
> -
> -/* IO pin fields */
> -#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
> -#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
> -#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
> -#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
> -#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
> -#define IO_PIN_DS(v) ((v)) /* slew rate */
> -
> -static struct iopin_t {
> - int p_offset; /* offset from IOCTL_MEM_OFFSET */
> - int nr_pins; /* number of pins to set this way */
> - int bit_or; /* or in the value instead of overwrite */
> - u_long val; /* value to write or or */
> -} ioregs_init[] = {
> - /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
> - {
> - IOCTL_SPDIF_TXCLK, 3, 0,
> - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> - },
> - /* Set highest Slew on 9 PATA pins */
> - {
> - IOCTL_PATA_CE1, 9, 1,
> - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> - },
> - /* FUNC1=FEC_COL Sets Next 15 to FEC pads */
> - {
> - IOCTL_PSC0_0, 15, 0,
> - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> - },
> - /* FUNC1=SPDIF_TXCLK */
> - {
> - IOCTL_LPC_CS1, 1, 0,
> - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> - },
> - /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
> - {
> - IOCTL_I2C1_SCL, 2, 0,
> - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> - },
> - /* FUNC2=DIU CLK */
> - {
> - IOCTL_PSC6_0, 1, 0,
> - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
> - },
> - /* FUNC2=DIU_HSYNC */
> - {
> - IOCTL_PSC6_1, 1, 0,
> - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> - },
> - /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
> - {
> - IOCTL_PSC6_4, 26, 0,
> - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
> - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
> - }
> -};
> -
> -void iopin_initialize(void)
> -{
> - short i, j, n, p;
> - u_long *reg;
> - immap_t *im = (immap_t *)CFG_IMMR;
> -
> - reg = (u_long *)&(im->io_ctrl.regs[0]);
> -
> - if (sizeof(ioregs_init) == 0)
> - return;
> -
> - n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
> -
> - for (i = 0; i < n; i++) {
> - for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
> - p < ioregs_init[i].nr_pins; p++, j++) {
> - if (ioregs_init[i].bit_or)
> - reg[j] |= ioregs_init[i].val;
> - else
> - reg[j] = ioregs_init[i].val;
> - }
> - }
> - return;
> -}
> diff --git a/board/ads5121/iopin.h b/board/ads5121/iopin.h
> deleted file mode 100644
> index 7ef8472..0000000
> --- a/board/ads5121/iopin.h
> +++ /dev/null
> @@ -1,222 +0,0 @@
> -/*
> - * (C) Copyright 2008
> - * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
> - * mpc512x I/O pin/pad initialization for the ADS5121 board
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#define IOCTL_MEM 0x000
> -#define IOCTL_GP 0x004
> -#define IOCTL_LPC_CLK 0x008
> -#define IOCTL_LPC_OE 0x00C
> -#define IOCTL_LPC_RWB 0x010
> -#define IOCTL_LPC_ACK 0x014
> -#define IOCTL_LPC_CS0 0x018
> -#define IOCTL_NFC_CE0 0x01C
> -#define IOCTL_LPC_CS1 0x020
> -#define IOCTL_LPC_CS2 0x024
> -#define IOCTL_LPC_AX03 0x028
> -#define IOCTL_EMB_AX02 0x02C
> -#define IOCTL_EMB_AX01 0x030
> -#define IOCTL_EMB_AX00 0x034
> -#define IOCTL_EMB_AD31 0x038
> -#define IOCTL_EMB_AD30 0x03C
> -#define IOCTL_EMB_AD29 0x040
> -#define IOCTL_EMB_AD28 0x044
> -#define IOCTL_EMB_AD27 0x048
> -#define IOCTL_EMB_AD26 0x04C
> -#define IOCTL_EMB_AD25 0x050
> -#define IOCTL_EMB_AD24 0x054
> -#define IOCTL_EMB_AD23 0x058
> -#define IOCTL_EMB_AD22 0x05C
> -#define IOCTL_EMB_AD21 0x060
> -#define IOCTL_EMB_AD20 0x064
> -#define IOCTL_EMB_AD19 0x068
> -#define IOCTL_EMB_AD18 0x06C
> -#define IOCTL_EMB_AD17 0x070
> -#define IOCTL_EMB_AD16 0x074
> -#define IOCTL_EMB_AD15 0x078
> -#define IOCTL_EMB_AD14 0x07C
> -#define IOCTL_EMB_AD13 0x080
> -#define IOCTL_EMB_AD12 0x084
> -#define IOCTL_EMB_AD11 0x088
> -#define IOCTL_EMB_AD10 0x08C
> -#define IOCTL_EMB_AD09 0x090
> -#define IOCTL_EMB_AD08 0x094
> -#define IOCTL_EMB_AD07 0x098
> -#define IOCTL_EMB_AD06 0x09C
> -#define IOCTL_EMB_AD05 0x0A0
> -#define IOCTL_EMB_AD04 0x0A4
> -#define IOCTL_EMB_AD03 0x0A8
> -#define IOCTL_EMB_AD02 0x0AC
> -#define IOCTL_EMB_AD01 0x0B0
> -#define IOCTL_EMB_AD00 0x0B4
> -#define IOCTL_PATA_CE1 0x0B8
> -#define IOCTL_PATA_CE2 0x0BC
> -#define IOCTL_PATA_ISOLATE 0x0C0
> -#define IOCTL_PATA_IOR 0x0C4
> -#define IOCTL_PATA_IOW 0x0C8
> -#define IOCTL_PATA_IOCHRDY 0x0CC
> -#define IOCTL_PATA_INTRQ 0x0D0
> -#define IOCTL_PATA_DRQ 0x0D4
> -#define IOCTL_PATA_DACK 0x0D8
> -#define IOCTL_NFC_WP 0x0DC
> -#define IOCTL_NFC_RB 0x0E0
> -#define IOCTL_NFC_ALE 0x0E4
> -#define IOCTL_NFC_CLE 0x0E8
> -#define IOCTL_NFC_WE 0x0EC
> -#define IOCTL_NFC_RE 0x0F0
> -#define IOCTL_PCI_AD31 0x0F4
> -#define IOCTL_PCI_AD30 0x0F8
> -#define IOCTL_PCI_AD29 0x0FC
> -#define IOCTL_PCI_AD28 0x100
> -#define IOCTL_PCI_AD27 0x104
> -#define IOCTL_PCI_AD26 0x108
> -#define IOCTL_PCI_AD25 0x10C
> -#define IOCTL_PCI_AD24 0x110
> -#define IOCTL_PCI_AD23 0x114
> -#define IOCTL_PCI_AD22 0x118
> -#define IOCTL_PCI_AD21 0x11C
> -#define IOCTL_PCI_AD20 0x120
> -#define IOCTL_PCI_AD19 0x124
> -#define IOCTL_PCI_AD18 0x128
> -#define IOCTL_PCI_AD17 0x12C
> -#define IOCTL_PCI_AD16 0x130
> -#define IOCTL_PCI_AD15 0x134
> -#define IOCTL_PCI_AD14 0x138
> -#define IOCTL_PCI_AD13 0x13C
> -#define IOCTL_PCI_AD12 0x140
> -#define IOCTL_PCI_AD11 0x144
> -#define IOCTL_PCI_AD10 0x148
> -#define IOCTL_PCI_AD09 0x14C
> -#define IOCTL_PCI_AD08 0x150
> -#define IOCTL_PCI_AD07 0x154
> -#define IOCTL_PCI_AD06 0x158
> -#define IOCTL_PCI_AD05 0x15C
> -#define IOCTL_PCI_AD04 0x160
> -#define IOCTL_PCI_AD03 0x164
> -#define IOCTL_PCI_AD02 0x168
> -#define IOCTL_PCI_AD01 0x16C
> -#define IOCTL_PCI_AD00 0x170
> -#define IOCTL_PCI_CBE0 0x174
> -#define IOCTL_PCI_CBE1 0x178
> -#define IOCTL_PCI_CBE2 0x17C
> -#define IOCTL_PCI_CBE3 0x180
> -#define IOCTL_PCI_GNT2 0x184
> -#define IOCTL_PCI_REQ2 0x188
> -#define IOCTL_PCI_GNT1 0x18C
> -#define IOCTL_PCI_REQ1 0x190
> -#define IOCTL_PCI_GNT0 0x194
> -#define IOCTL_PCI_REQ0 0x198
> -#define IOCTL_PCI_INTA 0x19C
> -#define IOCTL_PCI_CLK 0x1A0
> -#define IOCTL_PCI_RST_OUT 0x1A4
> -#define IOCTL_PCI_FRAME 0x1A8
> -#define IOCTL_PCI_IDSEL 0x1AC
> -#define IOCTL_PCI_DEVSEL 0x1B0
> -#define IOCTL_PCI_IRDY 0x1B4
> -#define IOCTL_PCI_TRDY 0x1B8
> -#define IOCTL_PCI_STOP 0x1BC
> -#define IOCTL_PCI_PAR 0x1C0
> -#define IOCTL_PCI_PERR 0x1C4
> -#define IOCTL_PCI_SERR 0x1C8
> -#define IOCTL_SPDIF_TXCLK 0x1CC
> -#define IOCTL_SPDIF_TX 0x1D0
> -#define IOCTL_SPDIF_RX 0x1D4
> -#define IOCTL_I2C0_SCL 0x1D8
> -#define IOCTL_I2C0_SDA 0x1DC
> -#define IOCTL_I2C1_SCL 0x1E0
> -#define IOCTL_I2C1_SDA 0x1E4
> -#define IOCTL_I2C2_SCL 0x1E8
> -#define IOCTL_I2C2_SDA 0x1EC
> -#define IOCTL_IRQ0 0x1F0
> -#define IOCTL_IRQ1 0x1F4
> -#define IOCTL_CAN1_TX 0x1F8
> -#define IOCTL_CAN2_TX 0x1FC
> -#define IOCTL_J1850_TX 0x200
> -#define IOCTL_J1850_RX 0x204
> -#define IOCTL_PSC_MCLK_IN 0x208
> -#define IOCTL_PSC0_0 0x20C
> -#define IOCTL_PSC0_1 0x210
> -#define IOCTL_PSC0_2 0x214
> -#define IOCTL_PSC0_3 0x218
> -#define IOCTL_PSC0_4 0x21C
> -#define IOCTL_PSC1_0 0x220
> -#define IOCTL_PSC1_1 0x224
> -#define IOCTL_PSC1_2 0x228
> -#define IOCTL_PSC1_3 0x22C
> -#define IOCTL_PSC1_4 0x230
> -#define IOCTL_PSC2_0 0x234
> -#define IOCTL_PSC2_1 0x238
> -#define IOCTL_PSC2_2 0x23C
> -#define IOCTL_PSC2_3 0x240
> -#define IOCTL_PSC2_4 0x244
> -#define IOCTL_PSC3_0 0x248
> -#define IOCTL_PSC3_1 0x24C
> -#define IOCTL_PSC3_2 0x250
> -#define IOCTL_PSC3_3 0x254
> -#define IOCTL_PSC3_4 0x258
> -#define IOCTL_PSC4_0 0x25C
> -#define IOCTL_PSC4_1 0x260
> -#define IOCTL_PSC4_2 0x264
> -#define IOCTL_PSC4_3 0x268
> -#define IOCTL_PSC4_4 0x26C
> -#define IOCTL_PSC5_0 0x270
> -#define IOCTL_PSC5_1 0x274
> -#define IOCTL_PSC5_2 0x278
> -#define IOCTL_PSC5_3 0x27C
> -#define IOCTL_PSC5_4 0x280
> -#define IOCTL_PSC6_0 0x284
> -#define IOCTL_PSC6_1 0x288
> -#define IOCTL_PSC6_2 0x28C
> -#define IOCTL_PSC6_3 0x290
> -#define IOCTL_PSC6_4 0x294
> -#define IOCTL_PSC7_0 0x298
> -#define IOCTL_PSC7_1 0x29C
> -#define IOCTL_PSC7_2 0x2A0
> -#define IOCTL_PSC7_3 0x2A4
> -#define IOCTL_PSC7_4 0x2A8
> -#define IOCTL_PSC8_0 0x2AC
> -#define IOCTL_PSC8_1 0x2B0
> -#define IOCTL_PSC8_2 0x2B4
> -#define IOCTL_PSC8_3 0x2B8
> -#define IOCTL_PSC8_4 0x2BC
> -#define IOCTL_PSC9_0 0x2C0
> -#define IOCTL_PSC9_1 0x2C4
> -#define IOCTL_PSC9_2 0x2C8
> -#define IOCTL_PSC9_3 0x2CC
> -#define IOCTL_PSC9_4 0x2D0
> -#define IOCTL_PSC10_0 0x2D4
> -#define IOCTL_PSC10_1 0x2D8
> -#define IOCTL_PSC10_2 0x2DC
> -#define IOCTL_PSC10_3 0x2E0
> -#define IOCTL_PSC10_4 0x2E4
> -#define IOCTL_PSC11_0 0x2E8
> -#define IOCTL_PSC11_1 0x2EC
> -#define IOCTL_PSC11_2 0x2F0
> -#define IOCTL_PSC11_3 0x2F4
> -#define IOCTL_PSC11_4 0x2F8
> -#define IOCTL_HRESET 0x2FC
> -#define IOCTL_SRESET 0x300
> -#define IOCTL_CKSTP_OUT 0x304
> -#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
> -#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
> -#define IOCTL_USB2_PHY_DRVV_BUS 0x310
> -
> -extern void iopin_initialize(void);
> diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
> index 2be35b2..8ba8ae8 100644
> --- a/cpu/mpc512x/Makefile
> +++ b/cpu/mpc512x/Makefile
> @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
> LIB = $(obj)lib$(CPU).a
>
> START = start.o
> -COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o
> +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
>
> SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
> OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
> diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
> new file mode 100644
> index 0000000..01ab34a
> --- /dev/null
> +++ b/cpu/mpc512x/iopin.c
> @@ -0,0 +1,49 @@
> +/*
> + * (C) Copyright 2008
> + * Martha J Marx, Silicon Turnkey Express, mmarx at silicontkx.com
> + * mpc512x I/O pin/pad initialization for the ADS5121 board
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <linux/types.h>
> +#include <mpc512x.h>
> +
> +void iopin_initialize(iopin_t *ioregs_init, int len)
> +{
> + short i, j, n, p;
> + u_long *reg;
> + immap_t *im = (immap_t *)CFG_IMMR;
> +
> + reg = (u_long *)&(im->io_ctrl.regs[0]);
> +
> + if (sizeof(ioregs_init) == 0)
> + return;
> +
> + for (i = 0; i < len; i++) {
> + for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
> + p < ioregs_init[i].nr_pins; p++, j++) {
> + if (ioregs_init[i].bit_or)
> + reg[j] |= ioregs_init[i].val;
> + else
> + reg[j] = ioregs_init[i].val;
> + }
> + }
> + return;
> +}
> diff --git a/include/mpc512x.h b/include/mpc512x.h
> index b4cc2b9..a76b1ca 100644
> --- a/include/mpc512x.h
> +++ b/include/mpc512x.h
> @@ -347,41 +347,226 @@
>
> /* IO Control Register
> */
> +#define IOCTL_MEM 0x000
> +#define IOCTL_GP 0x004
> +#define IOCTL_LPC_CLK 0x008
> +#define IOCTL_LPC_OE 0x00C
> +#define IOCTL_LPC_RWB 0x010
> +#define IOCTL_LPC_ACK 0x014
> +#define IOCTL_LPC_CS0 0x018
> +#define IOCTL_NFC_CE0 0x01C
> +#define IOCTL_LPC_CS1 0x020
> +#define IOCTL_LPC_CS2 0x024
> +#define IOCTL_LPC_AX03 0x028
> +#define IOCTL_EMB_AX02 0x02C
> +#define IOCTL_EMB_AX01 0x030
> +#define IOCTL_EMB_AX00 0x034
> +#define IOCTL_EMB_AD31 0x038
> +#define IOCTL_EMB_AD30 0x03C
> +#define IOCTL_EMB_AD29 0x040
> +#define IOCTL_EMB_AD28 0x044
> +#define IOCTL_EMB_AD27 0x048
> +#define IOCTL_EMB_AD26 0x04C
> +#define IOCTL_EMB_AD25 0x050
> +#define IOCTL_EMB_AD24 0x054
> +#define IOCTL_EMB_AD23 0x058
> +#define IOCTL_EMB_AD22 0x05C
> +#define IOCTL_EMB_AD21 0x060
> +#define IOCTL_EMB_AD20 0x064
> +#define IOCTL_EMB_AD19 0x068
> +#define IOCTL_EMB_AD18 0x06C
> +#define IOCTL_EMB_AD17 0x070
> +#define IOCTL_EMB_AD16 0x074
> +#define IOCTL_EMB_AD15 0x078
> +#define IOCTL_EMB_AD14 0x07C
> +#define IOCTL_EMB_AD13 0x080
> +#define IOCTL_EMB_AD12 0x084
> +#define IOCTL_EMB_AD11 0x088
> +#define IOCTL_EMB_AD10 0x08C
> +#define IOCTL_EMB_AD09 0x090
> +#define IOCTL_EMB_AD08 0x094
> +#define IOCTL_EMB_AD07 0x098
> +#define IOCTL_EMB_AD06 0x09C
> +#define IOCTL_EMB_AD05 0x0A0
> +#define IOCTL_EMB_AD04 0x0A4
> +#define IOCTL_EMB_AD03 0x0A8
> +#define IOCTL_EMB_AD02 0x0AC
> +#define IOCTL_EMB_AD01 0x0B0
> +#define IOCTL_EMB_AD00 0x0B4
> +#define IOCTL_PATA_CE1 0x0B8
> +#define IOCTL_PATA_CE2 0x0BC
> +#define IOCTL_PATA_ISOLATE 0x0C0
> +#define IOCTL_PATA_IOR 0x0C4
> +#define IOCTL_PATA_IOW 0x0C8
> +#define IOCTL_PATA_IOCHRDY 0x0CC
> +#define IOCTL_PATA_INTRQ 0x0D0
> +#define IOCTL_PATA_DRQ 0x0D4
> +#define IOCTL_PATA_DACK 0x0D8
> +#define IOCTL_NFC_WP 0x0DC
> +#define IOCTL_NFC_RB 0x0E0
> +#define IOCTL_NFC_ALE 0x0E4
> +#define IOCTL_NFC_CLE 0x0E8
> +#define IOCTL_NFC_WE 0x0EC
> +#define IOCTL_NFC_RE 0x0F0
> +#define IOCTL_PCI_AD31 0x0F4
> +#define IOCTL_PCI_AD30 0x0F8
> +#define IOCTL_PCI_AD29 0x0FC
> +#define IOCTL_PCI_AD28 0x100
> +#define IOCTL_PCI_AD27 0x104
> +#define IOCTL_PCI_AD26 0x108
> +#define IOCTL_PCI_AD25 0x10C
> +#define IOCTL_PCI_AD24 0x110
> +#define IOCTL_PCI_AD23 0x114
> +#define IOCTL_PCI_AD22 0x118
> +#define IOCTL_PCI_AD21 0x11C
> +#define IOCTL_PCI_AD20 0x120
> +#define IOCTL_PCI_AD19 0x124
> +#define IOCTL_PCI_AD18 0x128
> +#define IOCTL_PCI_AD17 0x12C
> +#define IOCTL_PCI_AD16 0x130
> +#define IOCTL_PCI_AD15 0x134
> +#define IOCTL_PCI_AD14 0x138
> +#define IOCTL_PCI_AD13 0x13C
> +#define IOCTL_PCI_AD12 0x140
> +#define IOCTL_PCI_AD11 0x144
> +#define IOCTL_PCI_AD10 0x148
> +#define IOCTL_PCI_AD09 0x14C
> +#define IOCTL_PCI_AD08 0x150
> +#define IOCTL_PCI_AD07 0x154
> +#define IOCTL_PCI_AD06 0x158
> +#define IOCTL_PCI_AD05 0x15C
> +#define IOCTL_PCI_AD04 0x160
> +#define IOCTL_PCI_AD03 0x164
> +#define IOCTL_PCI_AD02 0x168
> +#define IOCTL_PCI_AD01 0x16C
> +#define IOCTL_PCI_AD00 0x170
> +#define IOCTL_PCI_CBE0 0x174
> +#define IOCTL_PCI_CBE1 0x178
> +#define IOCTL_PCI_CBE2 0x17C
> +#define IOCTL_PCI_CBE3 0x180
> +#define IOCTL_PCI_GNT2 0x184
> +#define IOCTL_PCI_REQ2 0x188
> +#define IOCTL_PCI_GNT1 0x18C
> +#define IOCTL_PCI_REQ1 0x190
> +#define IOCTL_PCI_GNT0 0x194
> +#define IOCTL_PCI_REQ0 0x198
> +#define IOCTL_PCI_INTA 0x19C
> +#define IOCTL_PCI_CLK 0x1A0
> +#define IOCTL_PCI_RST_OUT 0x1A4
> +#define IOCTL_PCI_FRAME 0x1A8
> +#define IOCTL_PCI_IDSEL 0x1AC
> +#define IOCTL_PCI_DEVSEL 0x1B0
> +#define IOCTL_PCI_IRDY 0x1B4
> +#define IOCTL_PCI_TRDY 0x1B8
> +#define IOCTL_PCI_STOP 0x1BC
> +#define IOCTL_PCI_PAR 0x1C0
> +#define IOCTL_PCI_PERR 0x1C4
> +#define IOCTL_PCI_SERR 0x1C8
> +#define IOCTL_SPDIF_TXCLK 0x1CC
> +#define IOCTL_SPDIF_TX 0x1D0
> +#define IOCTL_SPDIF_RX 0x1D4
> +#define IOCTL_I2C0_SCL 0x1D8
> +#define IOCTL_I2C0_SDA 0x1DC
> +#define IOCTL_I2C1_SCL 0x1E0
> +#define IOCTL_I2C1_SDA 0x1E4
> +#define IOCTL_I2C2_SCL 0x1E8
> +#define IOCTL_I2C2_SDA 0x1EC
> +#define IOCTL_IRQ0 0x1F0
> +#define IOCTL_IRQ1 0x1F4
> +#define IOCTL_CAN1_TX 0x1F8
> +#define IOCTL_CAN2_TX 0x1FC
> +#define IOCTL_J1850_TX 0x200
> +#define IOCTL_J1850_RX 0x204
> +#define IOCTL_PSC_MCLK_IN 0x208
> +#define IOCTL_PSC0_0 0x20C
> +#define IOCTL_PSC0_1 0x210
> +#define IOCTL_PSC0_2 0x214
> +#define IOCTL_PSC0_3 0x218
> +#define IOCTL_PSC0_4 0x21C
> +#define IOCTL_PSC1_0 0x220
> +#define IOCTL_PSC1_1 0x224
> +#define IOCTL_PSC1_2 0x228
> +#define IOCTL_PSC1_3 0x22C
> +#define IOCTL_PSC1_4 0x230
> +#define IOCTL_PSC2_0 0x234
> +#define IOCTL_PSC2_1 0x238
> +#define IOCTL_PSC2_2 0x23C
> +#define IOCTL_PSC2_3 0x240
> +#define IOCTL_PSC2_4 0x244
> +#define IOCTL_PSC3_0 0x248
> +#define IOCTL_PSC3_1 0x24C
> +#define IOCTL_PSC3_2 0x250
> +#define IOCTL_PSC3_3 0x254
> +#define IOCTL_PSC3_4 0x258
> +#define IOCTL_PSC4_0 0x25C
> +#define IOCTL_PSC4_1 0x260
> +#define IOCTL_PSC4_2 0x264
> +#define IOCTL_PSC4_3 0x268
> +#define IOCTL_PSC4_4 0x26C
> +#define IOCTL_PSC5_0 0x270
> +#define IOCTL_PSC5_1 0x274
> +#define IOCTL_PSC5_2 0x278
> +#define IOCTL_PSC5_3 0x27C
> +#define IOCTL_PSC5_4 0x280
> +#define IOCTL_PSC6_0 0x284
> +#define IOCTL_PSC6_1 0x288
> +#define IOCTL_PSC6_2 0x28C
> +#define IOCTL_PSC6_3 0x290
> +#define IOCTL_PSC6_4 0x294
> +#define IOCTL_PSC7_0 0x298
> +#define IOCTL_PSC7_1 0x29C
> +#define IOCTL_PSC7_2 0x2A0
> +#define IOCTL_PSC7_3 0x2A4
> +#define IOCTL_PSC7_4 0x2A8
> +#define IOCTL_PSC8_0 0x2AC
> +#define IOCTL_PSC8_1 0x2B0
> +#define IOCTL_PSC8_2 0x2B4
> +#define IOCTL_PSC8_3 0x2B8
> +#define IOCTL_PSC8_4 0x2BC
> +#define IOCTL_PSC9_0 0x2C0
> +#define IOCTL_PSC9_1 0x2C4
> +#define IOCTL_PSC9_2 0x2C8
> +#define IOCTL_PSC9_3 0x2CC
> +#define IOCTL_PSC9_4 0x2D0
> +#define IOCTL_PSC10_0 0x2D4
> +#define IOCTL_PSC10_1 0x2D8
> +#define IOCTL_PSC10_2 0x2DC
> +#define IOCTL_PSC10_3 0x2E0
> +#define IOCTL_PSC10_4 0x2E4
> +#define IOCTL_PSC11_0 0x2E8
> +#define IOCTL_PSC11_1 0x2EC
> +#define IOCTL_PSC11_2 0x2F0
> +#define IOCTL_PSC11_3 0x2F4
> +#define IOCTL_PSC11_4 0x2F8
> +#define IOCTL_HRESET 0x2FC
> +#define IOCTL_SRESET 0x300
> +#define IOCTL_CKSTP_OUT 0x304
> +#define IOCTL_USB2_VBUS_PWR_FAULT 0x308
> +#define IOCTL_USB2_VBUS_PWR_SELECT 0x30C
> +#define IOCTL_USB2_PHY_DRVV_BUS 0x310
> +
> +#ifndef __ASSEMBLY__
> +
> +
> +/* IO pin fields */
> +#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */
> +#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */
> +#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */
> +#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */
> +#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */
> +#define IO_PIN_DS(v) ((v)) /* slew rate */
> +
> +typedef struct iopin_t {
> + int p_offset; /* offset from IOCTL_MEM_OFFSET */
> + int nr_pins; /* number of pins to set this way */
> + int bit_or; /* or in the value instead of overwrite */
> + u_long val; /* value to write or or */
> +}iopin_t;
> +
> +void iopin_initialize(iopin_t *,int);
> +#endif
>
> /* Indexes in regs array */
> -#define MEM_IDX 0x00
> -#define PATA_CE1_IDX 0x2e
> -#define PATA_CE2_IDX 0x2f
> -#define PATA_ISOLATE_IDX 0x30
> -#define PATA_IOR_IDX 0x31
> -#define PATA_IOW_IDX 0x32
> -#define PATA_IOCHRDY_IDX 0x33
> -#define PATA_INTRQ_IDX 0x34
> -#define PATA_DRQ_IDX 0x35
> -#define PATA_DACK_IDX 0x36
> -#define SPDIF_TXCLOCK_IDX 0x73
> -#define SPDIF_TX_IDX 0x74
> -#define SPDIF_RX_IDX 0x75
> -#define PSC0_0_IDX 0x83
> -#define PSC0_1_IDX 0x84
> -#define PSC0_2_IDX 0x85
> -#define PSC0_3_IDX 0x86
> -#define PSC0_4_IDX 0x87
> -#define PSC1_0_IDX 0x88
> -#define PSC1_1_IDX 0x89
> -#define PSC1_2_IDX 0x8a
> -#define PSC1_3_IDX 0x8b
> -#define PSC1_4_IDX 0x8c
> -#define PSC2_0_IDX 0x8d
> -#define PSC2_1_IDX 0x8e
> -#define PSC2_2_IDX 0x8f
> -#define PSC2_3_IDX 0x90
> -#define PSC2_4_IDX 0x91
> -
> -#define IOCTRL_FUNCMUX_SHIFT 7
> -#define IOCTRL_FUNCMUX_FEC 1
> -#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
> -
> /* Set for DDR */
> #define IOCTRL_MUX_DDR 0x00000036
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-08-04 17:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-15 10:13 [U-Boot-Users] [PATCH] Move mpc5121 iopoin feature from board specific to common files Kenneth Johansson
2008-07-29 14:25 ` [U-Boot-Users] unassigned-patches/7: " u-boot at bugs.denx.de
2008-08-04 17:06 ` [U-Boot-Users] " John Rigby
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox