From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Date: Mon, 04 Aug 2008 15:03:21 -0500
Subject: [U-Boot-Users] Increasing U-Boot partition size
In-Reply-To: <48976025.6090404@freescale.com>
References: <587a08410808011016v61ed05acy1c49f1fc7aafbfe2@mail.gmail.com>		<20080804175619.GA15744@ld0162-tx32.am.freescale.net>		<587a08410808041203k3252fcfdvb24dcaceb145bcfd@mail.gmail.com>		<489752BB.9040706@freescale.com>	<587a08410808041259j1b6a9471o30652a5a10bc202d@mail.gmail.com>
	<48976025.6090404@freescale.com>
Message-ID: <48976089.9010004@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Scott Wood wrote:
> Jatin Sharma wrote:
>> I have Freescale MPC8347. Can you confirm that I have to have U-Boot
>> start at 0xFFF00000?
> 
> Your choices are 0xfff00000 and zero, based on the BMS (Boot Memory 
> Space) bit of the low reset control word.

Grr, that should say "high reset control word".

-Scott