From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jens Gehrlein <sew_s@tqs.de>
Date: Thu, 07 Aug 2008 08:07:48 +0200
Subject: [U-Boot-Users] [PATCH] mx31: move freescale's mx31 boards to
 vendor	board dir
In-Reply-To: <1218057295-20684-1-git-send-email-plagnioj@jcrosoft.com>
References: <1218057295-20684-1-git-send-email-plagnioj@jcrosoft.com>
Message-ID: <489A9134.3030202@tqs.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Jean-Christophe PLAGNIOL-VILLARD schrieb:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  Makefile                                           |    6 +++---
>  board/{ => freescale}/imx31_litekit/Makefile       |    0 
>  board/{ => freescale}/imx31_litekit/config.mk      |    0 
>  .../{ => freescale}/imx31_litekit/imx31_litekit.c  |    0 
>  .../{ => freescale}/imx31_litekit/lowlevel_init.S  |    0 
>  board/{ => freescale}/imx31_litekit/u-boot.lds     |    0 
>  board/{ => freescale}/imx31_phycore/Makefile       |    0 
>  board/{ => freescale}/imx31_phycore/config.mk      |    0 
>  .../{ => freescale}/imx31_phycore/imx31_phycore.c  |    0 
>  .../{ => freescale}/imx31_phycore/lowlevel_init.S  |    0 
>  board/{ => freescale}/imx31_phycore/u-boot.lds     |    0 
>  board/{ => freescale}/mx31ads/Makefile             |    0 
>  board/{ => freescale}/mx31ads/config.mk            |    0 
>  board/{ => freescale}/mx31ads/lowlevel_init.S      |    0 
>  board/{ => freescale}/mx31ads/mx31ads.c            |    0 
>  board/{ => freescale}/mx31ads/u-boot.lds           |   10 +++++-----
>  16 files changed, 8 insertions(+), 8 deletions(-)
>  rename board/{ => freescale}/imx31_litekit/Makefile (100%)
>  rename board/{ => freescale}/imx31_litekit/config.mk (100%)
>  rename board/{ => freescale}/imx31_litekit/imx31_litekit.c (100%)
>  rename board/{ => freescale}/imx31_litekit/lowlevel_init.S (100%)
>  rename board/{ => freescale}/imx31_litekit/u-boot.lds (100%)
>  rename board/{ => freescale}/imx31_phycore/Makefile (100%)
>  rename board/{ => freescale}/imx31_phycore/config.mk (100%)
>  rename board/{ => freescale}/imx31_phycore/imx31_phycore.c (100%)
>  rename board/{ => freescale}/imx31_phycore/lowlevel_init.S (100%)
>  rename board/{ => freescale}/imx31_phycore/u-boot.lds (100%)
>  rename board/{ => freescale}/mx31ads/Makefile (100%)
>  rename board/{ => freescale}/mx31ads/config.mk (100%)
>  rename board/{ => freescale}/mx31ads/lowlevel_init.S (100%)
>  rename board/{ => freescale}/mx31ads/mx31ads.c (100%)
>  rename board/{ => freescale}/mx31ads/u-boot.lds (90%)

I'm not sure: is the phycore board a Freescale board? Isn't it Phytec?

Kind regards,
Jens